Brilliance 328P6 www.philips.
Table of Contents 1. Important �������������������������������������� 1 1.1 Safety precautions and maintenance ��������������������������������� 1 1.2 Notational Descriptions ������������ 3 1.3 Disposal of product and packing material ������������������������������������������ 4 2. Setting up the display ��������������� 5 2.1 2.2 2.3 2.
1. Important • When positioning the monitor, make sure the power plug and outlet are easily accessible. • If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. • Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Service contact information listed in Important information manual.
1. Important • Looking at something varying distances after a long period focusing on the screen. • Conscious Blinking often while you work. • • • Gently closing and rolling your eyes to relax. If foreign substance or water gets in your display, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. • Reposition your screen to appropriate height and angle according to your height.
1. Important repaired. The damage mentioned above is not covered under your warranty. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Service • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact with your local service center. (please refer to Service contact information listed in Important information manual.
1. Important Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. 1.3 Disposal of product and packing material Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install the base 2. Setting up the display 1. 2.1 Installation Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. Package contents Brilliance 328P6 Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the neck with both hands. (1) Gently attach the neck to the VESA mount area until the latch locks the neck.
2. Setting up the monitor 3. Connect the monitor signal cable to the video connector on the back of your computer. Connecting to your PC 4. Plug the power cord of your computer and your monitor into a nearby outlet. 1 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete. 10 11 8 7 6 5 4 3 4 USB C driver installation for RJ45 2 Before using the USB C docking display, please ensure to install the USB C driver.
2. Setting up the monitor Note Please contact Philips service hotline for Mac address clone tool as necessary. Note If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF. 5 USB hub To comply with International energy standards, the USB hub/ports of this display are disabled during Sleep and Power Off modes. Connected USB devices will not work in this state.
2. Setting up the monitor Customize your own “USER” key 2.2 Operating the display This hot key allows you to setup your favorite function key. Description of the control buttons 1. Press button on the front bezel to enter OSD Menu Screen. 3 7 6 5 4 2 2. Press ▲ or ▼ button to select main menu [OSD Settings], then press button. 1 3.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD displays. It allows an end user to adjust screen performance or select functions of the displays directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification Pivot This display is designed for optimal performance at its native resolution, 3840 x 2160 @ 60 Hz. When the display is powered on at a different resolution, an alert is displayed on screen: Use 3840 x 2160 @ 60 Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor the front bezel. 2.3 MultiView What is it? Multiview enables active dual connect and view so that you can work with multiple devices like PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze. • Why do I need it? With the ultra high resolution Philips MultiView display, you can experience a world of connectivity in a comfortable way in the office or at home.
2. Setting up the monitor • Press ▲ or ▼ button to select main menu [PIP / PBP], then press button. • Press ▲ or ▼ button to select [PIP / PBP Mode], then press button. • Press ▲ or ▼ button to select [PIP] or [PBP]. • Now you can move backward to set the [PIP / PBP Input], [PIP Size], [PIP Position] or [Swap]. Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.
2. Setting up the monitor Swap A and B source in [PBP] mode: 1 A (main) • B ↔ B (main) A 2 Off: Stop MultiView function. A (main) Note This display accepts a 100mm x 100mm VESA-Compliant mounting interface. 2.4 Remove the Base Assembly for VESA Mounting Before you start disassembling the display base, please follow the instructions below to avoid any possible damage or injury. 1. 100mm 100mm Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.
3. Image Optimization 3. Image Optimization 2. Keep pressing to toggle among Office, Photo, Movie, Game, Economy, SmartUniformity and Off. 3.1 SmartImage 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are multiple modes to select: EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode, SmartUniformity and Off.
3. Image Optimization sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors - all without artifacts and faded colors. • Movie: Ramped up luminance, deepened color saturation, dynamic contrast and razor sharpness displays every details in darker areas of your videos without color washout in brighter areas maintaining a dynamic natural values for the ultimate video display.
4. HDR 4. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desk top, enter to Display settings. STEP 5 2. Select the display/monitor. 3. Adjust resolution to 3840 x 2160 4. Turn the “HDR and WCG” to on mode. 5. Adjust Brightness for SDR content. Note Windows10 edition is required; always upgrade to the most updated version. Below linkage is for the further more information from mircrosoft official website. https://support.microsoft.
5. Technical Specifications 5. Technical Specifications Picture/Display Display Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast ratio (typical) Optimum Resolution Viewing Angle Picture Enhancement Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Color Gamut HDR SmartUniformity Delta E (typ.) LowBlue Mode EasyRead Connectivity Signal Input USB USB C-Power Delivery RJ-45 Input Signal Audio In/Out Convenience Built-in speaker Multi View User Convenience VA W-LED system 31.
5. Technical Specifications OSD Languages Other Convenience Plug & Play Compatibility Stand Tilt Swivel Height adjustment Pivot English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brasil Portuguese, Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean VESA mount(100×100mm), Kensington Lock DDC/CI, Mac OS X, sRGB, Windows 10/8.
5. Technical Specifications Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish 13.26 kg 0°C to 40 °C 20% to 80% 700 to 1060hPa -20°C to 60°C 10% to 90% 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing Black Texture Note 1.
5. Technical Specifications Note Please notice that your display works best at native resolution of 3840 x 2160 @ 60Hz. For best display quality, please follow this resolution recommendation. 5.1 Resolution & Preset Modes Maximum Resolution 3840 x 2160 @ 60 Hz (digital input) Recommended Resolution 3840 x 2160 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Displays Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual” as below on item Customer care and Warranty.
8. Troubleshooting & FAQs • 8. Troubleshooting & FAQs AUTO button doesn't function • 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Visible signs of smoke or sparks No Picture (Power LED not lit) Make sure the power cord is plugged into the power outlet and into the back of the display.
8. Troubleshooting & FAQs Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Green, red, blue, dark, and white dots appears on the screen • Image appears blurred, indistinct or too dark • • You can adjust “power on” light using the power LED Setup in OSD main Controls.
8. Troubleshooting & FAQs Q5: What if I get lost when I am making display adjustments via OSD? labelled 'desktop area', move the sidebar to 3840 x 2160 pixels. • Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 3840 x 2160 @ 60 Hz. • Shut down your computer, disconnect your old display and reconnect your Philips LCD display. • Ans.
8. Troubleshooting & FAQs 11500K temperature yields "cool, bluewhite toning". screen. "Burn-in", "afterimaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "Burn-in" or "afterimaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your display unattended.
8. Troubleshooting & FAQs Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page. 8.3 Multiview FAQs Q1: Can I enlarge the PIP sub window? Ans.: Yes, there are 3 sizes to select: [Small], [Middle], [Large]. You can press to enter OSD menu. Select your preferred [PIP Size] option from the [PIP / PBP] main menu. Q2: Why the sub-windows flickers when I enable PIP/PBP.
2019 © TOP Victory Investment Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
