User manual

7
2. Setting up the monitor
Note
Please contact Philips service hotline for
Mac address clone tool as necessary.
5
USB hub
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Sleep and
Power Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in “ON” state, please go to OSD Menu,
then select “USB standby mode”, and
switch it to “ON” state.
6
USB charging
This display has USB ports capable of
standard power output including some
with USB Charging function (identifiable
with power icon ). You can use these
ports to charge your Smart phone or
power your external HDD, for example.
The display must be powered ON at all
times to be able to use this function.
Some select Philips displays may not
Power or Charge your device when it
enters to “Sleep” mode (White power
LED blinking). In that case, please enter
to OSD Menu and select “USB Standby
Mode”, then, turn the function to “ON”
mode (default=OFF). This will then keep
the USB power and charging functions
active even when the monitor is in sleep
mode.

Resolution Notification
USB
Reset
Information
 

USB Standby Mode
Off
On
Note
If you Turn OFF your monitor via the
power switch at any given time, all the
USB ports will power OFF.