Momentum 329M1 www.philips.
Table of Contents 1. Important �������������������������������������� 1 1.1 Safety precautions and maintenance ��������������������������������� 1 1.2 Notational Descriptions ������������ 3 1.3 Disposal of product and packing material ������������������������������������������ 4 2. Setting up the display ��������������� 5 2.1 Installation ������������������������������������ 5 2.2 Operating the display ���������������� 8 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips display. Take time to read this user manual before you use your display. It contains important information and notes regarding operating your display.
1. Important degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • Oil-based cleaning solutions may damage the plastic parts and void the warranty. • Unplug the monitor if you are not going to use it for an extensive period of time. • Do not knock or drop the monitor during operation or transportation.
1. Important • Uninterrupted display of still or static images over an extended period may cause “Burn-in”, also known as “after-imaging” or “ghost imaging”, on your screen. 1.2 Notational Descriptions “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “Burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
1. Important Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the Display Install base stand 2. Setting up the display 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation 1 Package contents Momentum 329M1 Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands.Gently attach the stand to the VESA mount area until the latch locks the stand.
2.
2. Setting up the Display 1. AC power input 4 USB hub 2. DisplayPort input To comply with International energy standards, the USB hub/ports of this display are disabled during Standby and Off modes. 3. HDMI-1 input 4. HDMI-2 input 5. HDMI-3 input 6. AUDIO OUT Connected USB devices will not work in this state. 7. USB C 8. USB UP To permanently put the USB function in “ON” state, please go to OSD Menu, then select “USB standby mode”, and switch it to “ON” state.
2. Setting up the Display 2.2 Operating the display 1 Note If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF. Press to switch power on. Press more than 3 seconds to switch power off. Warning USB 2.4Ghz wireless devices, such as, wireless mouse, keyboard, and headphones, maybe have interference by the high-speed signal of USB 3.
2. Setting up the Display 2 EasyLink (CEC) Note 1. The EasyLink-compliant device must be switched on and selected as the source. What is it? HDMI is a single cable to carry both picture and audio signals from your devices to your monitor, saving you from cable clutter. It carries uncompressed signals, ensuring that you have the highest quality from source to screen. HDMI-connected monitors with Philips EasyLink (CEC) allow you to control functions of multiple connected devices with one remote control.
2. Setting up the Display To access the OSD menu on this Philips display simply use the single toggle button on the backside of the display bezel. The single button operates like a joystick. To move the cursor, simply toggle the button in four directions. Press the button to select desired option.
2. Setting up the Display 4 Resolution notification This display is designed for optimal performance at its native resolution, 3840 X 2160 . When the display is powered on at a different resolution, an alert is displayed on screen: Use 3840 X 2160 for best results. Note 1. MPRT: To reduce motion blur, LED backlight will strobe synchronously with screen refresh, which may cause noticeable brightness change. • 75Hz refresh rate or higher is required for MPRT.
2. Setting up the Display Height adjustment 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the Display base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 130mm 329M1RV 329M1RVE Pivot 329M1RVE 0° 3 0° -90° 90° 3 Warning • • 2. While keeping the release button pressed, tilt the stand and slide it out.
2. Setting up the Display Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 2.4 MultiClient Integrated KVM 1 What is it? With MultiClient Integrated KVM switch, you can control two separate PCs with one monitor-keyboard-mouse set up. A convenient button allows you to quickly switch between sources.
2. Setting up the Display 3. Enter to OSD menu. Go to KVM layer and select “Auto”, “USB C” or “USB up” to switch the control of peripherals from one device to another. Simply repeat this step for switching the control system using one set of peripheral. KVM Auto: Source USB Hub HDMI/DP USB C 2.
2. Setting up the Display 1. Toggle to the right to enter OSD Menu Screen. [PBP Input]: There are 5 different video inputs to choose as the sub display source: [1 HDMI 2.1], [2 HDMI 2.1], [3 HDMI 2.1], [DisplayPort], [USB C]. 2. Toggle to the up or down to select main menu [PBP], then toggle to the right to confirm. 3. Toggle to the up or down to select [PBP Mode], then toggle to the right. SUB SOURCE POSSIBILITY (xl) Inputs 4.
3. Image Optimization 1. Toggle to the left to launch the SmartImage on screen display. 3. Image Optimization 2. Toggle to the up or down to select among Xbox, FPS, Racing, RTS, Gamer 1, Gamer 2, Movie, Economy, LowBlue Mode, SmartUniformity, Off. 3.1 SmartImage 1 What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time.
3. Image Optimization ity and response time for Xbox consoles. • Convenient CEC Control: Consumer Electronics Control (CEC) connects the remote control to the display and Xbox console, allowing control over power and volume settings. • Immersive Ambiglow Xbox Experience: When in Xbox mode the monitor will, by default, glow in Xbox atmosphere green for a more immersive Xbox experience. • Other Ambiglow modes: More Ambiglow modes are available for use for a customized experience.
3. Image Optimization • Xbox: Level up your Xbox experience, by optimizing gaming performance, connecting the remote control, and enabling Ambiglow with HDR format. Optimal Picture Performance: Optimizes display image quality and response time for Xbox consoles. • Convenient CEC Control: Consumer Electronics Control (CEC) connects the remote control to the display and Xbox console, allowing control over power and volume settings.
3. Image Optimization • AMD Radeon R9 285 • AMD Radeon R7 260X • AMD Radeon R7 260 3.3 AMD FreeSync Premium ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
4.Ambiglow How to enable Ambiglow 4. Ambiglow Ambiglow function can be selected through OSD menu by pressing right button to choose and pressing right button again to confirm the selection: Ambiglow 1. Press right button. 2. To switch Ambiglow off, or select [Follow Video], [Follow Audio], [Color Shift], [Color Wave], [Color Breathing], [Starry Night], [Static Mode], [Your Color], [Light Position], [Speed], [Brightness], [Off].
5.HDR 5. HDR 5.1 HDR Settings in Windows 10 system Steps STEP 5 1. Right click on the desktop, enter to display settings. 2. Select the display/monitor. 3. Adjust resolution to 3840 X 2160. 4. Turn the “HDR and WCG” to on mode. 5. Adjust Brightness for SDR content. Note Windows 10 edition is required, always upgrade to the most updated version. Note To switch off HDR function, please disable from Input device and its content.
6.Power Delivery and Smart Power Note 6. Power Delivery and Smart Power • Power] will be turned off. Smart Power is an exclusive Philips technology that provides flexible power delivery options. With Smart Power, you can still charge your device without sacrificing the screen brightness, even set your screen as VESA DisplayHDR 400. 1 How to enable Smart Power? 1. Connect the device to the USB C port. 2.
7. Technical Specifications 7. Technical Specifications Picture/Display Display Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast ratio (typ.) Recommended Resolution Viewing Angle Picture Enhancement Vertical Refresh Rate Horizontal Frequency sRGB Color Gamut SmartUniformity Delta E LowBlue Mode Display Colors Flicker-free HDR Ambiglow AMD FreeSync Premium Connectivity Connectors Power Delivery Sync Input Convenience IPS W-LED 31.5" (80 cm) 16:9 0.181 (H) mm x 0.
7. Technical Specifications OSD Languages Other Convenience Plug & Play Compatibility English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean VESA mount(100x100 mm), Kensington Lock DDC/CI, sRGB, Windows 10/8.
7. Technical Specifications Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental ROHS Packaging Specific Substances Cabinet Color Finish 0°C to 40 °C 20% to 80% 700 to 1060hPa -20°C to 60°C 10% to 90% 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing Black Glossy and texture Note 1.
7. Technical Specifications 3 Video Timing 7.1 Resolution & Preset Modes Maximum Resolution 3840 X 2160 @ 144 Hz (HDMI/DP) 3840 X 2160 @ 120 Hz (USB C) 2 Recommended Resolution 3840 X 2160 @ 60 Hz 1 Resolution V. freq (Hz) 640 x 480p 60Hz 4:3 720x 480p 60Hz 4:3 720 x 480p 60Hz 16:9 H. freq (kHz) Resolution V. freq (Hz) 1280x 720p 60Hz 1920x 1080i 60Hz 31.47 720 x 400 70.09 1920x 1080p 60Hz 31.47 640 x 480 59.94 720 x 576p 50Hz 4:3 50Hz 16:9 35.00 640 x 480 66.
7. Technical Specifications 3. If you feel the texts in your display is a little fade away, you can adjust your fonts setting in your PC/ Notebook as following steps.
8. Power Management 8. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED Color 58.9 W (typ.
9. Customer care and warranty Pixels and Sub pixels 9. Customer care and warranty A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel.
9. Customer care and warranty - Red + Green = Yellow Green + Blue = Cyan (Light Blue) Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT display panel in a Philips flat panel display must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Three adjacent lit sub pixels (one white pixel).
9.
9. Customer care and warranty 9.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center.
10. Troubleshooting & FAQs • 10. Troubleshooting & FAQs Visible signs of smoke or sparks 10.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. 1 • • Make sure the display cable has no bent pins on the connect side. If yes, repair or replace the cable.
10. Troubleshooting & FAQs application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. 10.2 General FAQs Q1: When I install my display what should I do if the screen shows 'Cannot display this video mode'? Image appears distorted. Text is fuzzy or blurred. Ans.: Recommended resolution for this display: 3840 X 2160 .
10. Troubleshooting & FAQs install your monitor. Follow the instructions in your user manual, monitor drivers (.inf and .icm files) will be installed automatically. Ans.: Yes, you can change your color setting through OSD control as the following procedures, Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and display together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties".
10. Troubleshooting & FAQs Mac system. Please contact your Philips sales representative for more information. Ans.: Your LCD display works best at its native resolution of 3840 X 2160 . For best display, please use this resolution. Q10: Are Philips LCD displays Plugand- Play? Q13: How to unlock/lock my hot key? Ans.: Yes, the displays are Plug-andPlay compatible with Windows 10/8.1/8/7. Ans.
2021 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
