Brilliance 329P1 241B8 www.philips.
Table of Contents 1. Important �������������������������������������� 1 1.1 Safety precautions and maintenance ��������������������������������� 1 1.2 Notational Descriptions ������������ 3 1.3 Disposal of product and packing material ������������������������������������������ 4 2. Setting up the monitor �������������� 5 2.1 Installation ������������������������������������ 5 2.2 Operating the monitor �������������� 8 2.
1. Important 1. Important • Do not block the ventilation holes on the cabinet. This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user’s manual before you use your monitor. It contains important information and notes regarding the operation of your monitor. • When positioning the monitor, make sure the power plug and outlet are easily accessible.
1. Important • The USB Type-C port could only be connected to specify equipment with fire enclosure in compliance with IEC 62368-1 or IEC 60950-1. • Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours.
1. Important • Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. 1.2 Notational Descriptions “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “Burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2. Setting up the monitor 2.1 Installation 1 Package contents Brilliance 329P1 Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. (1) Gently attach the stand to the VESA mount area until the latch locks the stand.Gently attach the base to the stand. Monitor User’s Manual 使用产品前请阅读使用说明 Contents: User’s Manual Drivers 2 02 rsio n 保留备用 Vic Ch P TO ina . Ve 0© in te d In pr in ry to www.philips.
2. Setting up the monitor 3 Connecting to your PC 9 USB downstream/USB fast charger 10 AC power input 11 Power Switch 10 11 9 Fast Charger 1 Connect to PC 8 7 6 5 3 4 1. 2 Connect the power cord to the back of the display firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer. USB docking (USB C-C) a-1 4. Plug the power cord of your computer and your monitor into a nearby outlet. a-2 a 5.
2. Setting up the monitor 5 USB hub your system. 2. Double click driver to install, and follow Window’s instructions to proceed with installation. To comply with International energy standards, the USB hub/ports of this monitor are disabled during Standby and Off modes. 3. It will show “success” when the installation is finished. Connected USB devices will not work in this state. 4. You must reboot your computer after the installation has completed.
2. Setting up the monitor Note 2.2 Operating the monitor If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF. Description of the control buttons 1 Warning USB 2.4Ghz wireless devices, such as, wireless mouse, keyboard, and headphones, maybe have interference by USB3.2 or higher version, the highspeed signal devices, which may result in a decreased efficiency of the radio transmission.
2. Setting up the monitor 2 Webcam 1 2 3 Customize your own “USER” key This hot key allows you to setup your favorite function key. 3 1. 1 2 3 2 4 1 Press button on the front bezel to enter OSD Menu Screen. 1 Microphone 2 IR of Face identification 3 2.0 Megapixel Webcam 4 Webcam activity light 2.
2. Setting up the monitor 4 Description of the On Screen Display The OSD Menu What is On-Screen Display (OSD)? Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor 5 Resolution notification 6 Physical Function This monitor is designed for optimal performance at its native resolution, 3840 x 2160. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840 x 2160 for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. Tilt 25˚ -5˚ Note 1. 2. The USB hub default setting of USB C input for this monitor is “USB 3.2”.
2. Setting up the monitor Pivot 2.3 Built-in Windows Hello™ pop-up webcam 1 0° Phillips' innovative and secure webcam pops up when you need it and securely tucks back into the monitor when you are not using it. The webcam is also equipped with advanced sensors for Windows Hello facial recognition, which conveniently logs you into your Windows devices in less than 2 seconds, 3 times faster than a password.
2. Setting up the monitor top of this monitor, and turn it to the front. 1 2 Windows Hello. Once you've added this, the option for Hello will unlock. 3 2. Simply connect the USB cable from your PC to the “USB C” port of this monitor d. You'll now see which options are available to set up under Windows Hello. USB C 3. Setting in Windows 10 for Windows Hello a. In the settings app click on accounts. e. Click on "Get started." The setting is complete. Note 1.
2. Setting up the monitor 2.4 Remove the Base Assembly for VESA Mounting Before you start disassembling the display base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. While keeping the release button pressed, tilt the base and slide it out. 1 2 Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface.
2. Setting up the monitor 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
3. Image Optimization 2. Keep pressing to toggle among EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode, SmartUniformity and Off. 3. Image Optimization 3.1 SmartImage 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are multiple modes to select: EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode, SmartUniformity and Off.
3. Image Optimization • Photo: This profile combines color saturation, dynamic contrast and sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors - all without artifacts and faded colors. • Movie: Ramped up luminance, deepened color saturation, dynamic contrast and razor sharpness displays every details in darker areas of your videos without color washout in brighter areas maintaining a dynamic natural values for the ultimate video display.
3. Image Optimization • AMD Radeon R7 260X • AMD Radeon R7 260 3.3 Adaptive Sync • Adaptive Sync • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
4. PowerSensor detection signal for distances up to 120 cm or 47 inches. (Setting 4) 4. PowerSensor™ • How does it work? • PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user-presence. • When the user is in front of the monitor, the monitor operates normally, at the predetermined settings that the user has set- i.e.
4. PowerSensor monitor is returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
5. Designs to prevent computer vision syndrome 3. Ideal working posture 5. Designs to prevent computer vision syndrome (CVS) • Reposition your screen to appropriate height and angle according to your height. 4. Choose Philips monitor for easy-oneyes. Philips monitor is designed to prevent eye strain caused by prolonged computer use. • Anti-glare screen: Anti-glare screen efficiently reduces annoying and distracting reflections that caused eye fatigue.
6. Technical Specifications 6.
6. Technical Specifications OSD Languages Other Convenience Plug & Play Compatibility Stand Tilt Pivot Swivel Height adjustment English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brasil Portuguese, Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean VESA mount(100×100mm), Kensington Lock DDC/CI, Mac OS X, sRGB, Windows 10/8.
6. Technical Specifications Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish 12.20 kg 8.19 kg 15.
6. Technical Specifications recommendation. Recommended resolution HDMI 2.0/DP/USB C: 3840 x 2160 @ 60Hz If your display is not on the native resolution when connecting to USB C or DP port, please adjust resolution to the optimal state: 3840 x 2160 @60 Hz from your PC. 6.1 Resolution & Preset Modes Maximum Resolution 3840 x 2160 @ 60 Hz Recommended Resolution 3840 x 2160 @ 60 Hz 1. H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.
7. Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically.
8. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8. Customer care and warranty 8.1 Philips’ Flat Panel Displays Pixel Defect Policy Philips strives to deliver the highest quality products.
8. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
8.
8. Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center. For Warranty Period please refer to Warranty Statement in Important Information Manual.
9. Troubleshooting & FAQs 9. Troubleshooting & FAQs • Check to see if the display cable has bent pins. • Make sure the computer is turned on. 9.1 Troubleshooting Visible signs of smoke or sparks This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
9. Troubleshooting & FAQs • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode. • Green, red, blue, dark, and white dots appears on the screen Image appears blurred, indistinct or too dark • • Adjust the contrast and brightness on On-Screen Display. • You can adjust “power on” light using the power LED Setup in OSD main Controls.
9. Troubleshooting & FAQs • • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 3840 x 2160. • Shut down your computer, disconnect your old display and reconnect your Philips LCD display. • Q4: How do I adjust the resolution? Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK. Ans.: Your video card/graphic driver and display together determine the available resolutions.
9. Troubleshooting & FAQs Q11: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? enter color setting, there are three settings as below. 1. Color Temperature: Native, 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K range the panel appears "warm, with a redwhite color tone", while a 11500K temperature yields "cool, bluewhite toning". Ans.
9. Troubleshooting & FAQs To un-lock the OSD, press and hold the button while the monitor is off and then press button to turn the monitor on. the status shows ‘Running’, right click to stop the service first, then restart the service manually. 4. Then go back to sign-in options menu to set up Window Hello Webcam. Q14: Where can I find Important Information manual mentioned in EDFU? Ans.
2020 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
