User manual

EN 31
English
5 Set up your TV
Note for professional
installers
These settings are accessible to guests. They
can also be accessed in the professional
mode menu by selecting [TV setup].
Picture and sound
More picture settings
You can change the settings in the Picture
menu.
1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust, then press OK.
Note: Options marked with a * are available
for certain models only.
 [Smart picture]: Access predefined
smart picture settings.
 [Reset]: Reset to default factory
settings.
 [Backlight contrast]: Adjust the
contrast of the TV backlight.
 [Brightness]: Adjust the intensity and
details of the dark areas.
 [Colour]: Adjust the level of colour
saturation.
 [Hue]: Compensate colour variations in
NTSC transmissions.
 [Sharpness]: Adjust sharpness in the
image.
 [Noise reduction]: Filter and reduce
noise in the image.
 [Tint]: Adjust the colour balance in the
image.
 [Custom tint]: Customise tint setting.
 [Pixel Plus HD] / [Pixel Precise HD]*:
Control advanced settings to fine-tune
each pixel to match surrounding pixels.
This setting produces a brilliant, high-
definition image.
- [HD Natural Motion]*: Reduce
motion judder and reproduce smooth
motion.
- [Clear LCD]*: Enable superior
motion sharpness, better black level, high
contrast with a flicker-free, quiet image and a
larger viewing angle.
- [Super resolution]: Enable
superior sharpness, especially on lines and
contours in the picture.
- [Dynamic contrast]: Set the level
at which the TV automatically enhances
details in the dark, middle and light areas of
the picture.
- [Dynamic backlight]: Reduce
power consumption by dimming the TV
backlight to match room lighting conditions.
- [MPEG artefact reduction]:
Smooth the digital transitions in the picture.
- [Colour enhancement]: Set the
colours to be more vivid and improve the
resolution of details in bright colours.
- [Gamma]: Non-linear setting for
picture luminance and contrast.
- [Video contrast]: Change the
intensity of the bright areas, keeping dark
areas unchanged.
 [PC mode]: Allow picture settings to
be changed when a PC is connected to
the TV through HDMI.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content.
 [Light sensor]: Adjust settings
dynamically to match lighting conditions.
 [Picture format]: Change the picture
format.
 [Screen edges]: Change the picture
size.