Software upgrade procedure for XxHFL4010x/12 – HeartLine 2k15 range XxHFL5009x/12 – Mediasuite 2k14 range XxHFL5010x/12 – Mediasuite 2k15 range XxHFL7009x/12 –Signature 2k14-5 range 1 https://philipspds.supportsystem.
GENERAL INFORMATION The following procedure is for Philips 2014 and 2015 HeartLine, MediaSuite and Signature Hospitality TV range: XxHFL4010x/12 – HeartLine 2k15 range XxHFL5009x/12 – Mediasuite 2k14 range XxHFL5010x/12 – Mediasuite 2k15 range XxHFL7009x/12 –Signature 2k14-5 range (xx=reflecting the TV screen size in inches and end x=N or D is the option model) Philips Hospitality TVs can be used as: Stand-alone TV set Please always upgrade to the latest software version at time of installation.
Check the Current Software version The CSM contains data about the TV software, serial number and other details. The menu can be accessed using a standard remote control or using the master remote control. 1. Using the standard remote control: press the following key sequence “1,2,3,6,5,4” 2. For older platforms, using the green master remote control (22AV8753D): Press the RECALL button on the remote to activate the CSM menu.
PREPARATION FOR STANDALONE UPGRADE The USB drive used for software upgrade must be formatted as FAT32 and preferably empty to avoid and accidental upload of wrong setting and software. It recommended first to upgrade the TV and afterwards to perform the installation. Download the latest standalone software version via http://www.philips.
UPGRADE A TV SET OUT OF BOX 1. 2. 3. 4. 5. Take the set out of the box and leave it unplugged. Plug in the USB key and connect the TV to the mains. Wait until the upgrade starts. When the upgrade is finished remove the USB key and restart the TV. Check the software version on the second page of the CSM menu (123654) UPGRADE AN ALREADY INSTALLED TV SET 1. Switch ON the TV and wait until the OSD message had disappear from the screen. 2. Insert the USB flash drive in the side connector. 3.