Operation Manual
Table Of Contents
- Contents
- 1. Notice
- 2. Important
- 3. Get started
- 4. Use your TV
- 5. Use more of your TV
- 6. Set up your TV
- Introduction
- Benefits of specific Hotel TVs
- Professional Setup Remote control (22AV8573 optional)
- Professional mode options
- Setup settings
- PBS Setup
- TV Setup
- Change picture and sound settings (with PBS setup RC)
- More Channel Settings
- Change channel settings
- Source Selection
- Store Settings
- Smart Clone
- Welcome Logo / Hotel Information
- RF Download
- Start Download
- 7. Connect your TV
- 8. Troubleshooting
- 9. Product specifications
- 10. Index
MediaSuite xxHFL5573D/10 Page 38
• [Volume bar]: OSD.
[Off] No volume bar OSD
[On] Show volume bar OSD
Press OK to confirm your choice.
• [Channel information size]:
OSD.
[Classic] Normal OSD
[Big] Larger sized OSD
Press OK to confirm your choice.
• [Auto switch off]: switch off after
240 min:
[Off] No automatic switch off
[On] Automatic switch off
Press OK to confirm your choice.
• [Universal access]:
[Off] No Universal Access
[On] Universal Access
Press OK to confirm your choice.
• [Key beep]:
[Off] No audio beep on
pressing RC button
[On] Audio beep on pressing
RC button
Press OK to confirm your choice.
• [Audio Out Delay]: Set delay on
Audio Out.
[Off] No delay
[On] delay inserted
Press OK to confirm your choice.
• [TV placement]: Set position off
TV, influence on audio quality.
[Wall mounted]
[On a TV stand]
Press OK to confirm your choice.
• [Text 2.5]: Set Teletext 2.5
[Off] Not set (older version
used)
[On] 2.5 used
Press OK to confirm your choice.
• [Clock]: Set internal clock
[Auto clock mode] Not set
[Daylight saving] Not set
[Date] Not set
[Time] Not set
Press OK to confirm your choice.
4. Press [Back/PP] to return to TV
Setup Menu.
5. Press [Back/PP] to exit.
Reset to factory settings
Resetting your TV to factory settings
restores default picture and sound
settings.
Channel installation settings remain the
same.
1. Press [Home/Menu] ] > [TV
Setup>.
2. Select [Setup] > [TV settings] >
[Factory settings] , then press
OK.
TV settings are reset back to the factory
default.