operation manual

8
Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change�
• 75Hz refresh rate or higher is re-
quired for MPRT�
• Adaptive Sync and MPRT cannot be
enabled simultaneously�
• MPRT is to adjust brightness for blur
reduction, so cannot adjust bright-
ness while MPRT is turned on�
• MPRT is gaming-optimized mode�
Turn on MPRT may cause noticeable
screenickering.Itisrecommended
toturnowhenyouarenotusing
the gaming function�
3
Resolutionnotication
This monitor is designed for optimal
performance at its native resolution,
1920 x 1080� When the monitor is
poweredonatadierentresolution,an
alert is displayed on screen: Use 1920 x
1080 for best results�
Display of the native resolution alert can
beswitchedofromSetupintheOSD
(On Screen Display) menu�
4
Physical Function
Tilt
20°
-5°
Swivel
-45°
+45°
Height adjustment
130mm
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees�
• Do not press the screen while
adjusting the angle of the monitor�
Grasp only the bezel�