Register your product and get support at www.philips.
Contents Guide for Preparatory Work IMPORTANT SAFETY INSTRUCTIONS................................................... 2 SAFETY PRECAUTION............................................................................ 3 Panel control and rear terminal control...................................................... 6 Preparation of remote control.................................................................. 10 Descriptions of remote control function....................................................
IMPORTANT SAFETY INSTRUCTIONS Explain of Symbol Dear Philips’ users : Thanks for using Philips’ color LCD TV. Below is the explain of marking in the user manual to make it available when you read user manual and use color LCD TV. Warning To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or aplashing. Do not put any objects filled with liquids, such vases, cup or dressing cases on the TV set.
SAFETY PRECAUTION Install/ Setting To reduce the risk of fire, electric shock , damage and/or personnel hurt , pls. accord to below instruction when install and use TV set Install Install the plat TV set to wall by skilled personnel Incorrect installation is not safety for you and your TV set. Install the TV set near the convenience AC power receptacles.Put the TV set on the stable plane.
Keep the min. space marked above around the TV set. Ventilation Do not block the ventilation opening or insert any object in the enclosure. Keep spec around the TV set as above illustrate. Do not install your TV set as below illustrate Transit Disconnect all power cord before transit the TV set. Transit the big size TV set by two or more person. Grasp the four foreland of TV set and do not press the panel when transit the TV set. Hold the bottom when put up or move the TV set.
Keep power cord away from heat source Withdraw power cord plug and clean it periodical. The insulation may damage and even cause fire if the power cord is covered by dusty and vapor. Do not refit power cord Do not put heavy object against the power cord Do not pull power cord when withdraw it Do not connect too many equipment in the same AC power receptacle. Do not use the incorrect AC receptacle.
Do not use TV set when the surface is damaged. And do not touch TV set before disconnect from AC power source, otherwise may cause electric shock. Disconnect the AC power cord immediately under below situation: Power cord damaged AC power receptacle is incorrect TV set is falling , knocked or bumped caused damaged Any liquids or solid objects fall into TV set from opening. Precaution for Safety It is benefit to use this TV set in the weak electromagnetism interference surroundings.
For Child Do not let child climb on the TV set Put small accessory out of reach by child to avoid child swallow it down carelessly. Precaution Watching TV Watching TV under proper beam. For watching TV under weak beam or watching for a long time will damage your sight. Adjust volume properly to avoid audition hurt by high volume when using earphone. Display The TV set is manufactured by high precision technology and there may be some light or pixel loss in the display. This is not fault.
Panel control and rear terminal control Explanations: The following illustration is for your convenience to recognize where all terminals are located and to connect peripheral equipment; due to the product improvement, the indications may be different from the actual one. The actual indications shall prevail. Side control panel Side control panel 3 4 2 1 5 Explanations on the keys on the side of the TV set and their functions  1 INPUT: Recall / Close the signal source menu.
Panel control and rear terminal control Side CVBS and rear terminals 3 2 PC IN AUDIO TV ANTENNA Y PB PR L R VIDEO L R CVBS OUT HDMI2 VIDEO L R CVBS IN HDMI1 COMPONENT1 ＳＩＤＥ ＩＯ S-VIDEO L VIDEO R COMPONENT2 Y PB 9 PR L 1 R 4 6 HDMI3 7 9 CVBS 2/S-VIDEO 5 10 8 Explanations on the rear terminals and their functions:  1 . COMPONENT: Color aberration component (YCbCr, YPbPr) Video/ Audio Input Terminal  2 . AUDIO: VGA audio input terminal  3 .
Preparation of remote control Installation of remote control batteries •• As shown in the following diagram, put the remote control upside down and push open the battery chamber. •• Insert 2 AAA batteries as shown in the following diagram.(The positive and negative poles must correspond to the indication). •• Put back the battery chamber cover in place. 1 3 2 Never use rechargeable batteries, such as nickel-cadmium batteries.
Descriptions of remote control function Using remote control Note:Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it. When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after three seconds or press OK to remove immediately. WIDE BUTTON Press this button to display a list of available display formats.
Connection and preparation of the TV set Packing lis Power cord DFU Remote control If you prepare TV for wall mounting,please call service personnel to install. Guarantee the safety of TV. If you need to place the TV unit on the desktop,please buy the base assembly additional,the installation instruction of base assembly as follows: 32”/42” base installation 1. Place TV unit face down on a soft and flat surface(blanket,foam,cl oth,etc.) to prevent damage to the TV.
222 As indicated in the illustration, put the cover_stand a on the baseb (the 32” TV overleap this step, turn into the next step directiy). ķ ĸ 333 Put the base assembly on the right position of rear cover as indicated in the illustration. 444 Insert the screws back to the right position as indicated in the illustration by cross-shaped screwdriver.
47” base installation 111 Place TV unit face down on a soft and flat surface(blanket,foam,c loth,etc.) to prevent damage to the TV.remove 6 pieces of screws as indicated in the illustration by cross-shaped screwdriver. Remove six pieces of screws 222 Take out the base assembly out of the box, and put the cover_ stand and base on the table. Cover_stand base 333 Put the base on the right position of monitor and lock it tightly.
444 Insert the screws back to the right position as indicated in the illustration by cross-shaped screwdriver. the two long screws in the pe bag for accessory instead of the two pieces of screws primary in the bottom position (attention:there are two type of screws as indicated in the illustration,it must be inserted the right type of screws to guarantee the safety of TV). (the screw thread is dense) (the screw thread is sparse) 555 Place the TV unit on a firm and flat surface.
Backboard singal source interfaces There are a lot of signal sources that can be connected to your TV set. The following diagram shows how to connect them. Friendly tips: If you want to hang the TV set on a wall, all connecting lines must be inserted into the ports of the TV set in advance. Whenever a peripheral equipment is connected to the TV set, be sure the TV set is powered off. While connecting peripheral equipment, connect the cable to the terminal with the same color as its own.
Side signal source interfaces SIDE IO S-VIDEO HDMI3 VIDEO L R CVBS 2/S-VIDEO Earphone socket: The user may use the earphone via the earphone socket. CVBS-2 /S-VIDEO input: Connect the VIDEO outputs or S-VIDEO outputs of DVD player, LCD player, video recorder or video camera, etc. to the VIDEO input or S-VIDEO input of the TV set. (S-VIDEO is shared with the CVBS audio) Audio input: Connect the audio signal source (PC, DVD player, LCD player, video recorder or video camera, etc.
Preset and watch TV The following is how to use the On/Off key ( ) on the TV remote control to turn on/ off the TV set. (Press the key Channel +/- in standby mode may power on the unit, its the same for the side panel and the remote control. Power On/Off 1. While switching on the AC power supply, the red indicator lamp stands for standby mode, while the blue indicator lamp stands for power on. 2. If the TV set is in standby mode, press the On/Off key on the remote control to power on. 3.
Menu operation 111 Pressing the menu button may display or exit the main menu. 222 In the main menu, you may use the / key to select the functional options to be adjusted by moving up or down, press the > to enter the sub-menu adjustment, and press the menu key to exit the main menu. 333 In the sub-menu, you may use the key to make adjustment, use the / key to select the previous/next option, and press the menu key to go back to the previous level.
Menu operation I. Image setting 111 Video preset: Provide five image setting modes including Personal, Standard, Vivid, Movie, enco. You can adjust the "Contrast, Brightness, Color and Sharpness" to your taste only in the Personal mode. 222 Contrast: Make the dark color in the black portion of the image enricher and make the white color brighter. 333 Brightness: Adjust the brightness of the image background; it is often used together with the Contrast, adjustable from 0 to 100.
Menu operation II. Sound setting 1. Audio preset: Three output sound modes can be set, i.e. Personal, Music and speech. In the speech and Music modes, it is impossible to adjust Bass and Treble, while in the Personal mode, you may set the audio output effect by adjusting the Bass and Treble to your taste. 2. Bass: Adjustable from －10 to ＋10, used to adjust the volume of the low frequency sound. 3. Treble: Adjustable from －10 to ＋10, used to adjust the volume of the high frequency sound. 4.
Menu operation III. Function setting 1. Menu language: Set the menu language. Defaulted as English. 2. Menu timeout: Options including 10, 20, 30, 40, 50 and 60 seconds are available for you to set the menu timeout. 3. Sleep timer: Set the time interval for the TV set to enter standby mode automatically. (Not available in PC mode) Timing starts immediately after the sleep timer is set.
Menu operation IV. Channel setting (the following menus only appear in the TV mode) 1. 2. 3. (1) (2) (3) (4) (5) Auto search: Search and store program automatically; press the "Menu" key to exit the Auto search mode. Update search: Save the stored program and start a new search; Press the "Menu" key to exit the Update search mode. Manual search: Press > to enter the sub-menu as shown in the following diagram Program NO.: display the number of the current channel.
Menu operation (6) AFC: It can be set to On and Off. While it is set to On, the TV set will detect the TV signal automatically, and in case of offset of the signal within a certain range, it can adjust the channel to the correct position. 4. Program list: Press > to enter the sub-menu as shown in the following diagram It is possible to edit the program list according to the indications at the bottom of the menu.
Using Remote Control function ■ Mute, freezing and playback Mute setting In case an important guest visits you or you receive an incoming call while watching TV program, you can simply press the Mute key on the remote control to turn off the sound of TV program.Pressing the "Mute" key or the Vol + key again may restore the sound. Notice: 1. When pressing the Vol- key in the Mute mode, the value of volume decreases, however it is still in the mute display. 2.
Troubleshooting Abnormal symptoms image snow picture Check Sound Sound noise -Check antenna direction or connections -If use CATV,Please check if output extent of CATV meet National criteria(60dB-74dB),If Disturb Sound Noise not,pls contact with local TV Station 1.check if any electronic facility as/car/Moto/ fluorescence disturb natural No picture No color Poor picture or distort Natural Lost control 2. Change power socket to re-insert power cord 111 No sound Check if open mute key 2.
Product specifications Function PC input function Support TV, CVBS, S-VIDEO, YPbPr, HDMI inputs Item Viewable size TV function Video input Video output PC input Audio output Power supply 32PFL1409 42PFL1609 47PFL1609 800mm diagonal 1067mm diagonal 1194mm diagonal TV standard Color system: Auto, PAL, NTSC, SECAM, NTSC 443 Sound system: DK, I, BG, M, Audio system FM, MONO, STEREO, BILINGUAL CVBS RCA x 2 S-VIDEO S-VIDEO x 1 Component input YPbPr/YCbCr YPbPr/YCbCr x 1 HDMI input HDMI x
Product specifications Supported display resolutions Computer formats HDMI&VGA: 32PFL1409/93 Resolution 640x480 800x600 1024x768 1360x768 Refresh Rate(Hz) 60 60 60 60 42PFL1609/93 &47PFL1609/93: Resolution 640x480 800x600 1024x768 1360x768 1440x900 1680x1050 1920x1080 Refresh Rate(Hz) 60 60 60 60 60 60 60 Video formats 32PFL1409/93 & 42PFL1609/93 &47PFL1609/93: Resolution 640x480P 720(1440)x480i 720(1440)x576i 720x480p 720x576p 1280x720P 1920x1080i 1920x1080p Refresh Rate(Hz) 60 60 60 60 60 50,60 50,
Q41G32MV813 1A Manufacturer: Philips(China) Investment Co.,Ltd Address: 1602-1605 No.218 Tianmu west Road ShangHai P.R.C Zip code: 200070 Hot line:4008 80 0008 Published: Sep.
