User's Manual

14
47” base installation
Place TV unit face down on a soft and at surface(blanket,foam,c1.
loth,etc.) to prevent damage to the TV.remove 6 pieces of screws
as indicated in the illustration by cross-shaped screwdriver.
Remove six pieces of screws
Take out the base assembly out of the box, and put the cover_2.
stand and base on the table.
base
Cover_stand
Put the base on the right position of monitor and lock it tightly. 3.
Remove the two pieces of screws which mared before Inserting
the screws back to the right position as indicated.
the two pieces of screws which marked