Register your product and get support at www.philips.
Contents 1 Notice 2 2 Important 3 3 Your TV 5 4 6 7 FAQ 14 Attention: 14 Frequently Asked Question 14 Other Information 15 Troubleshooting 15 Product information 16 Supported display resolutions 16 Multimedia 16 Side controls and indicators 5 Sockets 5 Remote Control Functions 7 Use your TV 8 Switching on 8 Switching off 8 Tuner/Reception/Transmission 16 Menu Introduction 9 Remote control 16 Automatic Channel Set-up 9 Power 16 Smart Channel Set-up Supported TV
1 Notice Pixel characteristics Warranty This LCD/LED product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural proper ty of the display (within common industry standards) and is not a malfunction. No components are user serviceable. Do not open or remove covers to the inside of the product.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire ! Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. .
When you disconnect the power cord, always pull the plug, never the cable. Disconnect the TV from the power outlet and antenna before lightning storms. Dur ing lightning storms, never touch any par t of the TV, power cord or antenna cable. Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time.
3 Your TV Side controls and indicators CH 1 CH 2 VOL 1 CH VOL 2 VOL 3 MENU MENU 3 4 SOURCE SOURCE 4 5 5 1. CHANNEL UP/DOWN button Scans up/down through the channel list. In the menu system. They act like the up/down direction buttons on the remote and adjust menu controls. 2. VOLUME UP/DOWN button Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote and adjust menu controls 3 MENU button Brings up the menu system.
Headphone socket (output) at the side This socket can be used to connect headphones or stereo earphones. Note: When connecting headphones, you can press the control to mute the sound coming from the speakers. button on the remote In MUTE condition, Pressing the VOL+ and VOL- could change the volume of earphone. And you need to press the MUTE button on the remote to release the mute of speaker Warning: Excessive sound pressure from earphones and headphones can cause hearing loss.
Remote Control Functions Note: -Remote Control ( Depending on the models) and operation of remote control may be affected by bright artifical light near to the TV. Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. (On/Off button) Turns the TV on or off. MENU Brings up the menu system. FORMAT TV Selects a picture format.
4 Use your TV Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries.
Menu Introduction During the process of SMART SCAN, the number in front of CH stands for the newly searched programmes. SOURCE: Selecting a Signal Source PICTURE: Adjusting the Picture. SOUND: Adjusting the Sound FUNCTION: Function Settings. Note: If you want to interrupt the process, press the MENU button. The channels already found will be stored. Manual Channel Set-up CHANNEL: Chanel Search and Edit . MEDIA: If there is no new programme found, the number keeps unchanged, staying at 0.
Channel Edit You can use this function to swap two channels or skip a channel. 1. Activate the CHANNEL menu and press the up or down direction button to select the CHANNEL EDIT option. 2. Press the right direction or OK button to enter the CHANNEL EDIT menu. CHANNEL EDIT CURRENT NO. < 1 > SWAP NO. < 1 > SWAP < ? > SKIP < OFF > MENU KEY TO RETURN EXIT KEY TO EXIT Swapping Two Channels 1. Press the up or down direction button to select the CURRENT NO.
SHARPNESS: adjusts the crispness of the edges in the picture. Adjustments using the left or right direction button. HUE: adjusts the balance between the red and green levels. Note: Hue is available to be adjusted only when the system of the video signal is NTSC. COLOR TONE. : adjusts the color temperature of the picture.
COLOR SYSTEM: use the right direction or OK button to display the selectable options, then press the up or down direction button to select your desired color system and press OK to confirm. (Note: The available color system might differ depending on the model. Color Setting for India :PAL) SOUND SYSTEM: use the right direction or OK button to display the selectable options, then press the up or down direction button to select your desired sound system and press OK to confirm.
Geometry Settings Display the menu by pressing the MENU button. Press the left or right direction button to select the GEOMETRY icon and press the up or down direction or OK button to display the GEOMETRY menu. Note: This function is only available in PC mode. GEOMETRY AUTO ADJUST H POSITION 50 V POSITION 50 CLOCK 0 PHASE 60 AUTO ADJUST: press the right direction or OK button to adjust the picture's position, phase and clock automatically. The menu will auto exit when finishing the adjusting.
6 FAQ Attention and Frequently Asked Questions: Attention: 1. Some non-standard mobile storage device maybe cannot be recognized. Please change to use the standard device.The USB should be cleaned from virus before using this function. 2. This system only supports the following file formats: Picture format: .jpg Audio format: .mp3 3.
7 Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3. Power plug is in a bad contact with the outlet. 4. Check the signal source. No color 1. Change the color system. 2. Adjust the saturation. 3. Try another channel. Black-white program may be received.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Multimedia Supported USB storage device: (Only FAT 16 or FAT 32 USB stor age devices are supported) Suppor ted storage file formats: Images: JPEG Audio: MP3 Note Supported display resolutions Multimedia file names must not exceed 128 characters.
Supported TV mounts To mount theTV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV.
Consumer Guidelines 1. Kindly ensure that the dealer fills up Warranty card correctly. 2. To avail the Warranty please register your product with the Philips Logon to www.Philips.com OR Contact Philips Consumer Care Centre 3. In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set, the type no.and serial no.of the set. 4.
WARRANTY This TV receiver is covered under From whom the set has been purchased or warranty against any defect arising out through an Authorised Service Center for of faulty or defective material or workman warranty service. However, if the ship for a period of 12 months from the Purchaser has to shift his residence to date of purchase.
