Register your product and get support at www.philips.
Contents 1 2 3 4 5 6 EN Get started 3 TV tour TV controls Important information Sustainability Help and support 3 4 6 10 11 Use your TV 12 Watch TV View programme guide View media Browse Smart TV 12 15 16 18 Use more of your TV 19 Play games View Text Set locks and timers Use EasyLink View Scenea 19 19 20 21 24 Set up your TV 25 Picture and sound Channel settings Satellite settings Language settings Universal access settings Other settings Update software Restore default settings 25 26
TV tour Media playback If you connect your TV to a USB storage device, you can enjoy your movies, music and pictures on a wide screen TV with excellent sound.
TV controls Rear controls For 26PFL32x7 and 22PFL32x7: For PFL38x7, PFL35x7, PFL33x7, 42PFL32x7, 32PFL32x7, PFL31x7 and PFL30x7: 1. (Standby): Switch the TV on or off. 2. CH +/- (Channel +/-): Switch to the next or previous channel. 3. (Source): Access a connected device. 4. +/- (Volume +/-): Increase or decrease volume. EN 4 1. +/- (Volume +/-): Increase or decrease volume. 2. CH (Channel ): Switch to the next or previous channel. 3. No function. 4. (Source): Access a connected device. 5.
English For PFL30x7, PFL31x7, PFL33x7 and PFL35x7 - 32 to 47 inch TVs 1. Remote control sensor Point the remote control at the sensor. Make sure that the line-of-sight between the remote control and the TV is not blocked by furniture or other objects. 6. (Home): Access the Home menu. 7. OK: Confirm an entry or selection. 8. (Navigation buttons): Navigate through menus and select items. Remote control 1. (Standby): Switch the TV on or to standby. 2. Play buttons: Control playback of media files. 3.
Important information Safety 17. Colour buttons: Select tasks or options. The buttons function according to the services offered by the service provider. 18. SUBTITLE: Switch subtitles on or off. 19. 0-9 (Numeric buttons): Select TV channels or enter text. 20. TEXT: Enable or disable text. EasyLink controls Note: EasyLink controls are available when the connected device is HDMI-CEC compliant. With EasyLink controls, you can control your TV and other HDMI-CEC devices with one remote control.
Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: Never place the TV on a surface covered by a cloth or other material that can be pulled away. Ensure that no part of the TV hangs over the edge of the surface. Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. Educate children about the dangers of climbing on furniture to reach the TV.
Screen care Notice 2012 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Trademarks and copyrights This LCD/LED product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Sustainability Energy efficiency This TV is designed with energy-efficient features. To access these features, press the green button on the remote control. Energy saving picture settings: You can apply a combination of energy-saving picture settings. While you watch TV, press the Green button, then select [Energy saving]. Screen off: If you only want to listen to audio from the TV, you can switch off the TV display. Other functions continue to operate normally.
Search the TV forum The European Energy Label informs you on the energy efficiency class of the product. The greener the energy efficiency class of this product is, the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of the product in use and the average energy consumption for 1 year. You can also find the power consumption values for the product on the Philips website for your country at www.philips.com/TV.
2 Use your TV Watch TV Switch TV on or off Automatic switch off You can save energy with this TV's energy efficiency settings. The settings are enabled by default, so that if there is no user interaction (such as pressing a remote control button or a control on the rear panel) for four hours, the TV will automatically switch to standby. To disable automatic switch off 1. While you watch TV, press the Green button on the remote control. 2. Select [Auto switch off], then press OK. 3.
Manage channel lists After the channels have been installed, you can manage them: Rename channels Reorder channels Listen to digital radio Rename channels You can rename channels. The name appears when the channels are selected. 1. While you watch TV, press LIST. The channel list is displayed. 2. Select the channel to rename, then press OPTIONS. 3. Select [Rename], then press OK. 4. Press the Navigation buttons to select each character, then press OK.
Select a source Use smart settings You can watch a connected device in one of the following ways: Add its icon to the Home menu for easy access, then select it from the Home menu. Select from the Source menu. Note: If you connect an HDMI-CEC compliant device to the TV, it is automatically added to the Home menu. Add new device Your TV comes with smart picture and sound settings. You can apply these settings or customise them. Select your preferred picture setting 1. Connect and switch on the device.
You can change the picture format to suit the video source. 1. Press FORMAT. 2. Select a picture format, then press OK to confirm. The available picture formats depend on the video source: [Auto fill]: Adjust the picture to fill the screen (subtitles remain visible). Recommended for minimal screen distortion but not for HD or PC. [Auto zoom]: Enlarge the picture to fill the screen. Recommended for minimal screen distortion but not for HD or PC.
View media What you can do You can play videos, photos and music on your TV from: Your computer connected through the home network (For models with network connector only) A USB device connected to the TV Play files from computer What you need Available on certain models only. A wired or wireless home network, connected with a Universal Plug and Play (uPnP) router. A Philips wireless USB adapter (PTA01) or a LAN cable that connects your TV to your home network.
Watch video Press the Navigation buttons to select a video file, then press OK. Press to pause. Press to stop. Press / to search backward or forward. Press to exit the content browser. Video playback options While you play video, press OPTIONS to access the following video options: [Subtitles]: Select the available subtitles settings. [Audio language]: Select the available audio language. [Repeat]: Repeat a video, track or album. [Show info]: Display the file name.
Browse Smart TV Access Smart TV Applications (Apps) What you can do If your TV is connected to the Internet through your home network, you can watch YouTube videos and view media files from your home network. YouTube Leanback *Available on certain models only. With Internet Applications (Apps), specially adapted Internet websites for your TV, you can watch videos online. Note: Smart TV services and apps vary from country to country. Smart TV displays one page at a time, in full screen.
Play games Add a game console You can play games consoles projected on a wide screen TV with excellent sound. Before you start, connect your game console to this TV. See Connect your TV > Connect devices > Game console (Page 39). For easy access, add the game console to the Home menu. 1. Press . 2. Select [Add your devices] > [Game console], then press OK. 3. Follow the onscreen instructions to add the game console.
Text language For digital TV channels where the broadcasters provide different text languages, you can select your preferred primary and secondary language. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings]. 3. Select [Languages] > [Primary Text] or [Secondary Text]. 4. Select a language, then press OK. Subpages If the text page contains several subpages, you can view each subpage in succession. These subpages are shown on a bar next to the main page number.
Parental rating You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleeptimer. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences] > [Sleep timer]. 3. Press the Navigation buttons to set the sleeptimer. The sleeptimer can be set up to 180 minutes, in steps of ten minutes. To switch off the sleeptimer, set it to zero minutes. 4. Press OK to activate the sleep timer.
EasyLink remote control You can control multiple HDMI-CEC compliant devices with your TV remote control. System audio control If you connect an HDMI-CEC compliant device that includes speakers through the HDMI ARC connector, you can choose to hear the TV audio from those speakers instead of the TV speakers. Synchronise audio If you connect your TV to a home theatre, you can synchronise the audio and video to avoid lag between the picture and sound.
If the connected device is HDMI-CEC compliant, you can output TV audio through an HDMI cable. Make sure that you connect the device to the HDMI connector on the TV. See Connect your TV > About cables > HDMI (Page 33). Configure TV speakers 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [TV speakers]. 3. Select an option, then press OK: [Off]: Switch off TV speakers. [On]: Switch on TV speakers. [EasyLink]: Stream TV audio through the HDMI-CEC device.
Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link. Switch on Pixel Plus Link 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [Pixel Plus Link] > [On], then press OK. View Scenea What you can do With Scenea, you can display a picture as the wallpaper on your TV. Display the default picture or load your own picture as the wallpaper.
Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Continue], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. More picture settings You can change the settings in the Picture menu. 1. Press . 2.
More sound settings Select audio format You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to change, then press OK: [Smart sound]: Access predefined smart sound settings. [Reset]: Reset to factory default settings. [Clear Sound]: Enhance the sound quality. [Bass]: Change the bass level. [Treble]: Change the treble level. [Surround]: Switch on spatial sound.
7. Once the channel search is complete, select [Finish], then press OK. Tip: Press LIST to see the channel list. Note: When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels. Install analogue channels You can search and store analogue TV channels one by one. Step 1: Select your system Note: Skip this step if your system settings are correct. 1. While you watch TV, press . 2.
Update channel list When the TV was switched on for the first time, a full installation of channels was performed. By default, when there are changes to these channel lists, the TV updates them automatically. You can also switch off the automatic update or manually update the channels. Note: If you are prompted to enter a code, enter '8888'. Automatic update To add or remove digital channels automatically, leave the TV in standby mode. The TV updates channels and stores new channels everyday.
Add and remove satellites You can add or remove satellites at any time, and install channels from new satellites. Note: Before you add satellites, make sure that the connection type is correct. See Set up your TV > Satellite Settings > Install channels (Page 28). 1. Press > [Setup] > [Search for satellite], then press OK. 2. Select [Add satellite], then press OK. The TV searches for a satellite on the first free LNB. This can take several minutes.
Subtitles on digital channels Hearing impaired access 1. While you watch a digital TV channel, press OPTIONS. 2. Select [Subtitles], then press OK. 3. Select [Subtitles off], [Subtitles on] or [On during mute], then press OK. If you select [On during mute], subtitles are displayed only when you press to mute the sound. Note: If an MHEG application is activated, subtitles are not displayed. Tip: To make sure that a hearing impaired audio language is available, press OPTIONS, then select [Audio language].
3. Select a setting, then press OK. [On]: Enable audio effects in the visually impaired audio. [Off]: Disable audio effects in the visually impaired audio. Choose type of speech 1. Press . 2. Select [Setup] > [Channel settings] > [Languages] > [Visually impaired] > [Speech]. 3. Select a setting, then press OK. [Descriptive]: Hear descriptive speech in the visually impaired audio. [Subtitles]: Hear subtitles in the visually impaired audio.
Update software Check version 1. Press . 2. Select [Setup] > [Software settings] > [Current software inf], then press OK. The version of the current software is displayed. Caution: Do not install a lower version of software than the current version installed on your product. TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade.
Connect HDMI cables shorter than 5 meters/16.4 feet. About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections shown in this user manual are recommendations only. Other solutions are possible.
SCART CVBS A SCART connection combines video and audio signals. SCART connectors can handle RGB video signals but cannot handle high-definition (HD) TV signals. CVBS only transmits video. For sound, also connect to Audio Left/Right. CVBS connections provide standard picture quality. On certain models, the video input socket on your TV is labelled as VIDEO, AV IN or COMPOSITE. VGA You can connect VGA to display PC content on the TV. VGA only transmits video. For sound, also connect to AUDIO IN.
English Connect devices Blu-ray or DVD disc player Connect the disc player to the TV with an HDMI cable. Connect the disc player to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the disc player to the TV with a composite cable (CVBS) and an audio L/R cable.
TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable. (SAT is available on certain models only.) Connect the satellite or digital TV receiver to the TV with an HDMI cable. Connect the satellite or digital TV receiver to the TV with a SCART cable.
English Connect the satellite or digital TV receiver to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the satellite or digital TV receiver to the TV with a composite cable (CVBS) and an audio L/R cable. CVBS AUDIO L/R Video recorder Connect the recorder to the TV with an antenna cable. (SAT is available on certain models only.
Connect the recorder to the TV with a SCART cable. Connect the recorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the recorder to the TV with a composite cable (CVBS) and an audio L/R cable.
Game console English Connect the game console to the TV with an HDMI cable. Connect the game console to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable.
Home theatre Connect the home theatre to the TV with an HDMI cable and an optical cable. Connect the home theatre to the TV with a SCART cable. Connect the home theatre to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
CVBS English Connect the home theatre to the TV with a composite cable (CVBS) and an audio L/R cable. AUDIO L/R Digital camera NonPu blish Connect the digital camera to the TV with a USB cable. (For certain camera models only) Digital camcorder Connect the digital camcorder to the TV with an HDMI cable.
Connect the digital camcorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the digital camcorder to the TV with a composite cable (CVBS) and an audio L/R cable. Connect more devices USB hard drive Connect the USB hard drive to the TV with a USB cable.
Computer English Connect the computer to the TV with an HDMI cable. Connect the computer to the TV with a DVI-HDMI cable and an audio cable. Connect the computer to the TV with a VGA cable and an audio cable.
Watch a connected device Add new device Before you can watch a connected device, Add its icon to the Home menu for easy access. See Connect your TV > Connect device (Page 34). Select from the Source menu. Note: If you connect an HDMI-CEC compliant device to the TV through the HDMI connector and switch it on, the device will be automatically added to the Home menu. 1. Connect and switch on the device. 2. Press . 3. Select [Add new device], then press OK. 4. Follow the onscreen instructions.
Wired connection Warning: This TV complies with the EMC directive only when you use a shielded Cat5 Ethernet cable. An ethernet cable A computer network that includes: a) A universal plug-and-play (UPnP) router and b) A computer with one of the following operating systems: Microsoft Windows XP, Microsoft Windows Vista, Mac OS X or Linux. To connect your TV to computers, you also need media server software that is set to share files with your TV. See Use your TV > View media (Page 16).
Start wireless setup 1. Switch on your wireless network router. 2. Connect the Philips USB adapter PTA01 to a USB connector on the TV. The wireless installation starts automatically. 3. Follow the onscreen instructions. Tip: Keep the wireless USB adapter connected to the TV. WPS - Wi-Fi Protected Setup 1. If your router supports WPS (WiFi Protected Setup), press the WPS button on the router. 2. After 2 minutes, select [WPS] on the TV, then press OK. The TV connects to your network.
What you can do You can watch scrambled digital TV channels with a Conditional Access Module (CAM). After the CAM is inserted and subscription fees are paid, you can watch the programme. This TV supports CI as well as CI+. CI+ supports premium HD digital programmes with a high level of copy protection. Note: The applications, functions, content and onscreen messages depend on the CAM service provider. Watch CAM services 1. After you insert and activate the CAM, press OPTIONS. 2.
6 Troubleshooting General issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. The TV does not respond to remote control or front controls when switched on: The TV requires some time to start up. During this time, the TV does not respond to the remote control or front controls. This is normal behaviour.
Picture issues The TV is on, but there is no picture or the picture is distorted: Make sure that the antenna is properly connected to the TV. Make sure that the correct device is selected as the display source. Make sure that the external device or source is properly connected. There is sound but no picture: Make sure that the picture settings are set correctly. There is poor TV reception from an antenna connection: Make sure that the antenna is properly connected to the TV.
Sound issues Connection issues There is a picture but sound quality is poor: If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. Make sure that all cables are properly connected. Make sure that the volume is not muted or set to zero. Make sure that the TV speaker setting is selected. Press ADJUST, select [Speakers], and then select TV.
Contact Philips This section is applicable to certain models only. You want to establish a wireless connection between your TV and home network: Refer to Connect your TV > Network and the Internet > Wi-Fi ready (Page 45) for instructions on how to connect your TV wirelessly to your home network. Smart TV does not work: (Smart TV isavailable on certain models only.) Check that the router is properly connected to the TV and that your router has open access to the Internet.
7 Product specifications Power and reception Product specifications are subject to change without notice. Power Mains power : AC 220-240 V~, 50-60 Hz Standby power consumption : < 0.3 W Ambient temperature: 5 to 40 degrees Celsius For power consumption, see the product specifications at www.philips.com/support. The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2).
Video formats (Resolution - refresh rate) Computer formats - HDMI (Resolution - refresh rate) 480i - 60 Hz 480p - 60 Hz 576i - 50 Hz 576p - 50 Hz 720p - 50Hz, 60 Hz 1080i - 50Hz, 60 Hz 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz 640 x 480 - 60 Hz 800 x 600 - 60 Hz 1024 x 768 - 60 Hz 1280 x 720 - 60 Hz 1280 x 768 - 60 Hz 1280 x 1024 - 60 Hz 1360 x 768 - 60 Hz For Full HD TV only: 1680 x 1050 - 60 Hz 1920 x 1080 - 60 Hz Computer formats - VGA (Resolution - refresh rate) 640 x 480 - 60 Hz 800 x 600 - 60 Hz 1024 x
Supported audio/video files Multimedia file names must not exceed 128 characters.
You can mount your TV on the wall with a compatible TV mount (sold separately)*.
For 32PFL3507 and 32PFL3307: For PFL32x7 - 32 to 42 inch TVs: For PFL31x7 - 32 inch to 40 inch TVs: For PFL30x7 - 32 inch to 47 inch TVs: Before you mount the TV on the wall, find the correct length of the screw. To find the length of screw, add the thickness of your wall mount to the screw length, as shown in the graphic. Before you mount the TV on the wall, find the correct length of the screw.
Before you mount the TV on the wall, find the correct length of the screw. To find the length of screw, add the thickness of your wall mount to the screw length, as shown in the graphic. Help version English For PFL38x7 - 32 to 46 inch TVs: UMv 123007122235 - 20120531 For 50PFL38x7: Before you mount the TV on the wall, find the correct length of the screw. To find the length of screw, add the thickness of your wall mount to the screw length, as shown in the graphic.
8 Index connect, game console - 39 A connect, home theatre system - 40 age rating - 21 amplifier, select output - 23 analogue channels, fine-tune - 27 analogue channels, subtitles - 29 audio language - 29 audio sync - 23 C connect, home network - 45 connect, PC - 43 connect, recorder - 37 connect, TV receiver - 36 connect, USB - 16 connected device, add - 44 connected device, remove - 44 connected device, rename - 44 connectors - 33 CAM, enable - 47 CAM, insert - 47 CAM, see Conditional Access Module
energy efficient, settings - 10 Energy label - 11 EPG, Electronic Programme Guide - 3 external hard disk - 42 F favourite channels, list - 13 G game console - 39 games - 19 M English end of use - 10 media server program - 16 mode, home or shop - 31 multimedia, play files - 16 multimedia, supported formats - 53 N network, connect - 44 P parental rating - 21 PC, connect - 43 H PC, display resolutions - 53 HDMI - 33 picture format - 15 HDMI ARC - 33 picture settings - 25 hearing impaired - 30 pi
S T safety - 6 text 2.
© 2012 TP Vision Netherlands B.V. All rights reserved.