operation manual

EN 23
English
Pause a live TV broadcast
1. On a digital channel, press
to pause a
TV programme.
2. Press
to continue watching.
The status bar shows the following time
indicators:
A. When the programme was paused for
the first time.
B. Where the paused programme is
currently playing.
C. Where the live programme is currently
broadcast.
• To watch the stored broadcast, press
or to search backward or
forward.
• To change playback speed, press
or
repeatedly.
• To watch the live TV broadcast, press
.
Note: You cannot pause the TV broadcast
when a recording is in progress.
The stored broadcast on the USB hard
drive is deleted if you do any of the
following:
• Disconnect the USB hard drive.
• Start recording a TV programme.
• Access Smart TV
• Switch the TV to standby.
• Switch to another channel.
• Switch source to watch from a
connected device - a Blu-ray disc player,
digital receiver or USB storage device.
Record TV shows
What you can do
If your TV is connected to the Internet, you
can record TV programmes onto a USB
hard drive. You can either record current TV
programmes or a future TV programme.
Start and manage the recordings from the
electronic programme guide on the TV. See
Use your TV > View programme guide >
From the Internet (Page 16).
Note:
• Recording is only supported in
countries with Internet programme
guides and when your TV is connected
to the Internet.
• In Nordic countries, the TV provides
limited support for subtitles while
recording TV programmes.
What you need
To record TV programmes, do the following:
• Tune your TV to receive digital TV
channels (DVB broadcast or similar).
See Set up your TV > Channel
Settings > Automatic installation (Page
34).
• Make sure that your TV is connected to
the Internet through a high-speed
broadband connection. See Connect
your TV > Network and the Internet
(Page 52).
• Connect a USB 2.0 compatible hard
disk drive (HDD) with a minimum
capacity of 250 GB and a minimum
transfer speed of 30 megabytes per
second.
Note: You can use the same HDD to
record and Pause TV shows.
To check if the programme guide supports
recording:
Press
and select [Programme guide].
If you find the [TV Recording] button on
the programme guide page, you can set up
and manage recordings.