operation manual

EN 57
English
There is a picture but the sound quality is
poor:
Make sure that the sound settings are
correctly set.
There is a picture but sound comes from
one speaker only:
Make sure that sound balance is set to the
centre.
Connection issues
There are problems with HDMI devices:
• Note that HDCP (High-bandwidth
Digital Content Protection) support can
delay the time taken for a TV to display
content from an HDMI device.
• If the TV does not recognise the HDMI
device and no picture is displayed,
switch the source from one device to
another and back again.
• If there are intermittent sound
disruptions, make sure that output
settings from the HDMI device are
correct.
• If you use an HDMI-to-DVI adapter or
HDMI-to-DVI cable, make sure that an
additional audio cable is connected to
AUDIO IN - Y/Pb/Pr or AUDIO IN -
DVI/VGA (mini-jack only).
You cannot use EasyLink features:
Make sure that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMI-CEC
compatible.
If an HDMI-CEC compliant audio device is
connected to the TV and the TV does not
display any mute or volume icon when the
volume is muted, increased or decreased:
When a HDMI-CEC audio device is
connected this behaviour is normal.
USB device content is not displayed:
• Make sure that the USB storage device
is set to Mass Storage Class compliant,
as described in the storage device's
documentation.
• Make sure that the USB storage device
is compatible with the TV.
• Make sure that the audio and picture
file formats are supported by the TV.
Audio and picture files on your USB
storage device do not play or display
smoothly:
The transfer performance of the USB
storage device may limit the data transfer
rate to the TV which causes poor playback.
Network issues
You want to establish a wireless
connection between your TV and home
network:
Refer to Connect your TV > Network and
the Internet > Wi-Fi ready (Page 53) for
instructions on how to connect your TV
wirelessly to your home network.
Smart TV does not work:
Check that the router is properly connected
to the TV and that your router has open
access to the Internet. If your router has a
firewall or security settings, make sure that it
allows Smart TV data to pass through -
check your router documentation for details.
Open Internet access via Smart TV is slow:
• Try to improve the signal quality
between the router and TV if you are
accessing the Internet with a wireless
connection. See the router's
documentation for details.
• Always use a fast broadband
connection wherever possible.
• Update your TV with the latest
software to ensure that browsing speed
is optimal.
Your Network is slow:
If you are accessing your PC with a wireless
connection, see the router's documentation
to improve the signal quality between the
router and TV.