User Manual

Q554E_0.90.0.0 (Date published: 2012-07-30)
• TV keeps rebooting by itself.
• TV keeps restarting itself when streaming from Videociety. (Only applicable to country, Germany)
• Subtitle menu cannot be opened anymore and P+/P- do not work anymore after you switch
between channels with HbbTV application switched on.
• Missing satellite channels. (Only applicable to country, Germany)
• TV reboots by itself when you switch it on from standby when Portuguese is selected as menu
language.
• Unable to perform software upgrade when Portuguese is selected as menu language.
Q554E_0.89.0.0 (Date published: 2012-07-09)
• White dots appear onscreen while watching 3D movie from USB. (Only applicable to 3D models)
• Picture is corrupted when you watch a video in [2D to 3D conversion] mode. (Only applicable to 3D
models)
Q554E_0.88.0.0 (Date published: 2012-07-02)
• Unable to view all your favourite channels in the favourite list.
• No DVB-C channel is being installed on ZIGGO network. (Only applicable to country, Netherlands)
• Missing satellite channels. (Only applicable to country, Germany)
• Added an option to disable the deletion of channels in background install. (Only applicable to K-
models)
Q554E_0.87.0.0 (Date published: 2012-06-21)
• TV switches to standby by itself after power on for few minutes.
• TV turns off and on by itself while watching satellite channels. (Only applicable to K-models)
• “The video format is not supported” message appears onscreen via HDMI connection.
• TV has no sound when you play a video from Smart TV applications.
• Intermittent picture freeze and sound loss during TV programme recording playback.
• Picture is stretched and distorted when you watch a video in [Auto zoom] picture format.
• Subtitle is not synchronized with the video.
• Subtitle menu cannot be opened anymore and P+/P- do not work anymore after you switch
between channels with HbbTV application switched on.
• Flickering lines appear after you select [2D to 3D conversion]. (Only applicable to 5000 series)
• Picture remains in 2D mode although [2D to 3D conversion] is selected. (Only applicable to 5000
series)