Addendum Enlarge teletext pages The section “Enlarge teletext pages” in this user manual instructs you to press OPTION to enlarge teletext pages. Use dual screen teletext The section “Use dual screen teletext” in this user manual instructs you to press Dual screen to display normal teletext when dual screen teletext is enabled. After updating the TV software (to version 64.67.3 or higher), Dual screen can no longer be used to display normal teletext.
Register your product and get support at www.philips.
Model Serial www.philips.com/support Österreich 0810 000205 €0.07 pro Minute België/Belgique 078250145 €0.06 Per minuut/Par minute България +3592 489 99 96 Местен разговор Hrvatska 01 3033 754 Lokalni poziv Česká republika 800142840 Bezplatný hovor Danmark 3525 8759 Lokalt opkald Suomi 09 2311 3415 paikallispuhelu France 0821 611655 €0.09 Par minute Deutschland 01803 386 852 €0.
Table of contents 1 Important ������������������������������������������� 3 5.12 Update your TV software ������������������ 30 6 6.1 Automatically install channels ������������ 32 1.1 Safety ���������������������������������������������������� 3 6.2 Manually install channels �������������������� 33 1.2 Screen care ������������������������������������������ 4 6.3 Rename channels ������������������������������ 34 1.3 Environmental care ������������������������������ 4 2 3 6.
2008 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Important Congratulations on your purchase and welcome to Philips! the mains and have the TV checked by a qualified technician. • To avoid risk of fire or electric shock, do not place the TV, remote control or remote control batteries near naked flame sources (e.g. lighted candles) and other heat sources including direct sunlight. • Do not install the TV in a confined space such as a bookcase. Leave a space of at least 10cm (four inches) around the TV for ventilation.
3. Unplug the mains cord from the power connector at the back of the TV. Always pull the mains cord by the plug. Do not pull the mains cord. of time. Examples include screen menus, teletext pages, black bars or stock market tickers. If you must use stationary images, reduce the screen contrast and brightness to avoid screen damage. 1.3 Environmental care Recycling your packaging The packaging of this product is intended to be recycled.
Your TV Side connectors ENglish 2 This section gives you an overview of commonly-used TV controls and functions. 2.1 TV overview Side controls and indicators VOLUME 4 3 MENU PROGRAM 2 Use the TV side connectors to connect to mobile devices such as a camera or highdefinition game console. You can also connect a pair of headphones or a USB memory device. Back connectors 1 POWER 5 1. POWER 2. PROGRAM +/3. MENU 4. VOLUME +/5.
1. STANDBY Remote control 2. SOURCE 1 2 3 SOURCE TELETEXT SUBTITLE DEMO 4 GUIDE 5 OK OPTION EXIT 6 MENU BROWSE P 7 8 EN-6 1 2 3 4 5 6 7 8 9 MHEG CANCEL 0 4. COLOUR KEYS From left: Red, green, yellow, blue 5. NAVIGATION KEYS Up Î, Down ï, Left Í, Right Æ, OK 6. MENU 7. PROGRAM +/8. VOLUME +/- INFO BACK 3. TELETEXT For advanced information about the remote control, see Section 5.1 Remote control overview.
Get started This section helps you position and install the TV and supplements the information provided in the Quick Start Guide. DDNote Refer to the Quick Start Guide for stand mounting instructions. 3.1 Position the TV In addition to reading and understanding the safety instructions in Section 1.1, consider the following before positioning your TV: • The ideal viewing distance for watching TV is three times its screen size. • Position the TV where light does not fall on the screen.
Step 2 Remove the TV stand DDNote These instructions are only applicable to TV models with mounted stands. If your TV stand is not mounted, skip to Step 3 Secure the VESA-compatible wall bracket to the TV. TV stands may differ in shape on some TV models. 1. Carefully place the TV face down on a flat, stable surface that is covered by soft cloth. The cloth should be thick enough to protect your screen. 2. Using a cross-head screwdriver (not supplied), unscrew the four bolts that secure the stand to the TV.
Connect the antenna cable ENglish 3.3 1. Locate the TV ANTENNA connector at the back of the TV. 2. Connect one end of an antenna cable (not supplied) to the TV ANTENNA connector. Use an adaptor if the antenna cable does not fit. 3. Connect the other end of the antenna cable to your antenna outlet, ensuring that the cable is tightly secured at both ends. 3.4 Connect the mains cord UK - EIRE 1. Locate the AC IN mains connector at the back or on the bottom of the TV. 2.
3.5 Insert the remote control batteries 3.7 First time setup The first time the TV is switched on, a language selection menu appears. Menu language Please select your language... English Español Français Hrvatski 1. Slide the battery cover off the back of the remote control. 2. Insert the two supplied batteries (Size AAA, Type LR03). Be sure the + and - ends of the batteries line up with the markings inside the case. 3. Slide the cover back into position.
Use your TV 4.1.3 Switch your TV to standby ENglish 4 This section helps you perform basic TV operations. Instructions on advanced TV operations are provided in Section 5 Use more of your TV. 4.1 Switch your TV on/off or to standby • 4.1.1 Switch on your TV MENU PROGRAM POWER 1 • If the power indicator (1) is off, press POWER on the side of the TV. Press . STANDBY on the remote control. The power indicator switches to standby (red).
4.2 Watch TV 4.2.3 Adjust volume 4.2.1 Switch channels • Press VOLUME + or - on the remote control. • Press VOLUME + or - on the side controls of your TV. • Press a number (1 to 999) or press P +/on your remote control. • Press PROGRAM +/- on the side controls of the TV. • Press on the remote control to return to the previously-viewed TV channel. 4.2.2 Switch channels (digital receiver) • Press on the remote control to mute the sound. Press again to un-mute the sound.
Use teletext ENglish 4.4 Most TV channels broadcast information via teletext. 1. Press TELETEXT on the remote control. The main index page appears. 2. To select a page with the remote control: • Enter the page number with the number keys. • Press P +/- or Î/ï to view the next or the previous page. • Press a colour key to select one of the colour coded items at the bottom of the screen. Tip Press to return to the previously viewed page. 3. Press TELETEXT again to switch off teletext.
5 Use more of your TV This section helps you perform advanced TV operations, including how to: • Use the TV menus (Section 5.2) • Adjust picture and sound settings (Section 5.3) • Change to Shop or Home mode (Section 5.4) • Use advanced teletext features (Section 5.5) • Create favourite lists (Section 5.6) • Use the Electronic Programme Guide (Section 5.7) • Use timers and Child lock (Section 5.8) • Use subtitles (Section 5.9) • View photos and listen to music (Section 5.
2. SOURCE Selects connected devices. 3. PICTURE FORMAT Selects a picture format. 4. SUBTITLE Activates or deactivates subtitles. 19. DEMO Toggles the Demo menu on or off. ENglish 1. STANDBY Switches the TV on from standby or back to standby. 20. TELETEXT Toggles teletext on or off. 21. DUAL SCREEN Splits the current channel or source on the left of the screen. Teletext appears on the right. 5. COLOUR KEYS Selects tasks or teletext pages. 6. INFO Displays programme information, if available. 7.
5.2 Use TV menus On-screen menus help you install your TV, adjust picture and sound settings and access other features. This section describes how to navigate the menus. 5.2.2 Use the main menu The following example describes how to use the main menu. 5.2.1 Access the main menu 1. Press MENU on the remote control to display the main menu. Television 1. Press MENU on the remote control to display the main menu. Television TV menu Channel list Programme guide Multimedia 2. Press MENU to exit.
TV settings Picture Settings assistant Contrast Reset smart settings Brightness Colour Picture Hue Sound Sharpness Tint 5. Press Æ to enter the Picture settings. Picture Contrast Brightness Colour Hue Sharpness Tint Contrast 90 47 52 0 6. Press ï to select Brightness. Contrast Brightness Colour Hue Sharpness Tint 5.2.3 Use the Quick access menu The Quick access menu gives direct access to some often-needed menu items.
Quick access Audio language Subtitle language Subtitle Picture format Equalizer Clock 5.3.2 Adjust picture settings This section describes how to adjust picture settings. 1. Press MENU on the remote control and select TV menu > TV settings > Picture. TV settings 2. Press OPTION and press Î or ï to select Clock again. Contrast Reset smart settings Brightness Colour Picture Hue Sound 3. Press OK to hide the clock. 5.
• • • Dynamic contrast Enhances the contrast in the picture as the image on the screen changes. Set the level to Minimum, Medium, Maximum or Off. Medium is recommended. Noise reduction Filters and reduces the noise in the picture. Set the level to Minimum, Medium, Maximum or Off. Colour enhancement Makes colours more vivid and improves the resolution of details in bright colours. Set the level to Minimum, Medium, Maximum or Off.
5.3.4 Change picture format Change the picture format to suit your content. 1. Press PICTURE FORMAT on your remote control. Alternatively, press MENU and select TV menu > TV settings > Picture > Picture format. DDNote Constant use of the 4:3 picture format can cause screen distortion. We recommend you use Auto format. • Movie expand 14:9 (Not for HD) Scales the classic 4:3 format to 14:9. 2.
This section describes how to adjust sound settings. 1. Press MENU on the remote control and select TV menu > TV settings > Sound. • Balance Sets the balance of the left and right speakers to best fit your listening position. • Audio language Lists audio languages available for a digital channel (unavailable on analogue channels). • Dual I/II If available, choose between two different languages. • Mono/Stereo If stereo broadcasting is available, choose between mono or stereo.
5.4 Change to Shop or Home mode 2. Press INFO. 1. Press MENU on the remote control and select TV menu > Installation > Preferences > Location. 2. Press Æ to enter the Location menu. 3. Use Î or ï to select the TV mode: The T.O.P. overview appears. • Shop Sets smart settings to Vivid, ideal for a shop environment. The flexibility to change settings is limited. 3. Use Í, Æ or Î, ï to select a subject. • Home Gives home users the full flexibility to change all TV settings. 5.5.
For more comfortable reading, you can enlarge the teletext page. 1. Press TELETEXT on the remote control and select a teletext page. 2. Press OPTION on the remote control to enlarge the top part of the page. • Cycle subpages If subpages are available for the selected page, you can cycle subpages automatically. • Language Some languages use a different set of characters. If using a different language, switch to the appropriate language group to display the text correctly. 4.
1. Press MENU on the remote control and select TV menu > Installation > Preferences > Teletext 2.5. 2. Press Æ to enter the list. 3. Select On or Off. 4. Press OK to change the option. 5.6 Create favorite lists 5.6.2 Setup a favorite list 1. Press OK on the remote control. The last selected list appears. 2. Press the red key to show all favourite lists. 3. Press Î or ï to select a list. 4. Press OK. 5. Press the green key to enter Edit mode. The selected list displays a full channel list.
Use the Electronic Programme Guide EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes by time, title or genre. There are two types of EPG, ‘Now and Next’ and ‘7 or 8 day’ EPG. ‘Now and Next’ is always available but the ‘7 or 8 day’ EPG is only available in certain countries.
1. Press GUIDE on the remote control. 2. Press MENU on the remote control. The Programme guide menu appears. Programme guide What's on What's on 12:30 South Today Search by genre 11:50 Working Lunch Scheduled remind... 11:55 Melrose Place Preferred EPG ch... 13:00 In aller Freund Acquire EPG data DDNote You can always switch off your TV earlier or reset Sleeptimer during the countdown. 5.8.
1. Press MENU on the remote control and select TV menu > Features > Child lock and press Æ to enter your code. 2. Enter your code with the number keys. To lock or unlock all channels and connected devices 3. Press Î or ï to select Channel lock. 4. Press Æ. 5. Press Î or ï to select the channel or device you want to lock or unlock. 6. At each selection, press OK to lock or unlock the channel or device. To set parental ratings 2. Press OK. Some digital broadcasters rate their programmes according to age.
TV menu Features TV settings Features Subtitle Subtitle language Installation Sleeptimer Child lock Software update Set/Change code On timer Common interface Demo 7. Press Î or ï to select On to display subtitles always or On during mute to display subtitles only when the sound is muted with the key on the remote control. 8. Press OK to return to the Features menu. DDNote You must repeat this procedure to enable subtitles on each analogue channel. 5.9.
Slide show settings 1. After connecting your USB storage device to the TV, press Æ to enter the Multimedia menu. Picture is highlighted. • No details / More details Displays the picture name, date, size and next picture in the slide show. • Transitions Displays the list of available transition styles of the pictures. Press Î or ï to select and press OK to activate. • Slide time Sets the time lag for picture transitions: Short, Medium or Long. • Rotate Rotates a picture.
Music folder. 3. Press Î or ï to select a song or a music album. you update the TV software when updates are available. Check www.philips.com/support for availability. 4. Press OK to play the selected song or album. 5.12.1 Check your current software version Music settings • • No details/More details Displays the file name. • Repeat one/all Repeat a song or an album. • Shuffle Play songs in a random sequence. 5.10.
ENglish 5.12.4 Update software (analogue broadcasts) DDNote Before performing this procedure be sure to: • Set aside some time to complete the entire update. • Have available a USB storage device with at least 64MB of storage space. • Have access to a computer with a USB port and internet access. 1. Press MENU on the remote control and select TV menu > Software update > Update assistant. 2. Select Start now. 3. Insert the USB storage device and press the green key.
6 Install channels 5. Press Í twice to return to the Installation menu. The first time you setup your TV, you will be prompted to select an appropriate menu language and to perform automatic installation of all TV and digital radio channels (if available). Installation This chapter provides instructions on how to reinstall channels as well as other useful channel installation features. DDNote Re-installing channels modifies the All channels list. 6.
5. Press Î or ï to select your country. 6. Press Next. Step 3 Select Antenna or Cable (DVB-C only) DDNote This option appears only if your country supports DVB-C (Digital Video Broadcasting-Cable). Skip to Step 4 Install channels if DVB-C is not available in your country. 1. Press Î or ï to select Antenna or Cable. Selecting Antenna installs channels available via DVB-T (Digital Video Broadcasting-Terrestrial). Selecting Cable installs channels available via DVB-C. 2. Press Next.
Step 2 Search and store new TV channels 6.3 1. Press MENU on the remote control and select TV menu > Installation > Channel installation > Analogue: Manual installation > Search. 1. Press MENU on the remote control and select TV menu > Installation > Channel installation > Rearrange. 2. Press Æ to enter the Search menu. 3. Press the red key and use the number keys on the remote control to manually enter the three digit frequency.
3. Press Î or ï to select the channel you want to rearrange. 4. Press the yellow key to move the channel up the list. or press the blue key to move the channel down the list. 5. Press MENU to exit. 6.6 Manually update the channel list If your TV is in standby mode, an update is performed every morning. This update matches channels stored in your channel list with those available from your broadcaster. If a channel is unavailable, it is automatically removed from the channel list.
6.9 Reset TV to factory settings Resetting your TV to factory settings restores default picture and sound settings. Channel installation settings remain the same. 1. Press MENU on the remote control and select TV menu > Installation > Factory settings. 2. Press Æ to enter the Factory settings menu. Reset is highlighted. 3. Press OK to reset to factory settings. 4. Press MENU to exit.
Connect devices 7.1 Connection overview Back connectors 1. EXT 1 First SCART connector for DVD players, VCRs, digital receivers, game consoles and other SCART devices. Supports Audio L/R, CVBS in/out, RGB. 2. EXT 2 Second SCART connector. Supports Audio L/R, CVBS in/out, RGB. 3. EXT 3 Component video (Y Pb Pr) and Audio L/R input connectors for DVD players, digital receivers, game consoles and other component video devices. 4.
Side connectors 9. Headphones Stereo mini-jack. 10. AUDIO L/R Audio L/R input connectors for composite and S-Video devices. 11. VIDEO Video input cinch connector for composite devices. 12. S-VIDEO S-Video input connector for S-Video devices. 7.2 Select connection quality This section describes how you can enhance your audio visual experience by connecting your devices with the best possible connectors. After connecting your devices, be sure to enable them as described in Section 7.4 Setup devices. 7.2.
Component (Y Pb Pr) video provides better picture quality than S-Video or composite video connections. Though component video supports high-definition signals, picture quality is lower than HDMI and is analogue. When connecting a component video cable, match the cable colours to the EXT 3 connectors on the back of the TV. Also, connect a Audio L/R cable to the red and white Audio L/R input connectors at EXT 3. 7.2.
7.3 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Guide. CCCaution Disconnect the mains cord before connecting devices. DDNote Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. 7.3.1 Blu-ray Disc player For full high-definition video, connect a HDMI cable as illustrated: 7.3.
7.3.3 Satellite receiver ENglish To receive analogue channels via antenna and digital channels via a satellite receiver, connect an antenna cable and SCART cable as illustrated: Satellite receiver 7.3.
7.3.5 Combined DVD recorder and digital receiver To receive analogue channels via antenna and record programs on a combined DVD recorder and digital receiver, connect two antenna cables and one SCART cable as illustrated: OUT IN DVD Recorder / Digital receiver 7.3.
ENglish 7.3.7 DVD recorder and home theatre system To receive analogue channels via antenna, output sound to a home theatre system and record programmes on a DVD recorder, connect two antenna cables, one SCART cable and two digital audio cables as illustrated: DDNote If using a home theatre or other audio system, the best synchronisation between images and sound is achieved by connecting the audio signal from your playback device to the TV first.
A permanent game console or camcorder can be connected to a HDMI connector or EXT 3 (component) connectors at the back of the TV. 7.3.9 Personal Computer Before connecting the PC: • Set the PC monitor refresh rate to 60Hz. See Section 8 Technical specifications for a list of computer resolutions. • Change the TV picture format to Unscaled as described in Section 5.3.4. Change picture format. To connect a PC to the back of the TV 7.
Connections AUDIO IN L/R ... EXT 3 None HDMI 1 HDMI 1 HDMI 2 HDMI 2 HDMI 3 7.5.1 Enable or disable EasyLink 1. Press MENU on the remote control then select TV menu > Installation > Preferences > EasyLink. 2. Select On or Off. HDMI 3 Side AUDIO IN L/R 7.5.2 Use one-touch play • 2. Press Æ to enter the list. 3. Press ï or Î to select the HDMI connector used by the PC. 4. Press MENU to exit. 7.5.3 Use one-touch standby • 7.4.
DDNote Do not remove the CAM from the slot. Removing the CAM will deactivate the digital services. 7.6.2 Access CAM services • 2. Push the CAM in as far as it will go. After inserting and activating the CAM, press MENU on the remote control and select TV menu > Features > Common interface. This menu option is only available if the CAM is correctly inserted and activated. On-screen applications and content are provided by your digital TV service operator. 3.
Technical specifications Supported display resolutions • Computer formats Resolution Refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1920 x 1080i 60Hz 1920 x 1080p 60Hz • Video formats Resolution 480i 480p 576i 576p 720p 1080i 1080p 1080p Refresh rate 60Hz 60Hz 50Hz 50Hz 50Hz, 60Hz 50Hz, 60Hz 24Hz, 25Hz, 30Hz 50Hz, 60Hz • EXT 3: Component (Y Pb Pr), Audio L/R in • HDMI 1/2/3 DDNote The number of HDMI connectors available may vary according to your TV model.
9 Troubleshooting • This section describes commonly-encountered issues and accompanying solutions. 9.1 General TV issues No action is required. The creaking sound is normal expansion and contraction of the TV as it cools and warms up. This does not impact performance. 9.2 TV channel issues The TV does not switch on: • Unplug the mains cord, wait for one minute and plug in the mains again. Previously installed channels do not appear in the channel list: • Verify that the correct list is selected.
• Verify if the correct TV system is selected for your region.See Section 6.2 Manually install channels. If reception on only one channel is poor, try to fine tune this channel. See Section 6.2.1 Fine tune channels. You receive poor picture quality from connected devices: • Check that the devices are connected properly. Also, be sure to assign devices to connectors as described in Section 7.4.1 Assign devices to connectors. • Verify that picture settings are correctly set. See Section 5.3.
9.6 USB connection issues The TV does not display the USB device content: • Set your device to ‘Mass Storage Class’ compliant, as described in your device documentation. • Your USB device may not be compatible with the TV. • Not all audio and picture files are supported. See Section 8 Technical specifications for a list of supported file types. Audio and picture files do not play or display smoothly • The transfer performance of the USB device may limit the transfer rate. 9.
A Active Control 19 All channels list 24 Analogue Channel installation 33 Fine tune channels 34 Antenna Connect 9 Assign Devices 44 Audio language 21 Automatic Channel installation 32 Surround 21 Volume leveling 21 B Back connectors 5 Balance Sound 21 Brightness 18 C Care Environment 4 Screen 4 Channels All channels list 24 Change 12 Decoder 45 Favorite lists Select 24 Setup 24 Use 24 Installation Automatic 32 Manual 33 Rearrange 34 Rename 34 Test digital reception 35 Uninstall 34 Update channel list 35 Ch
Assign channel decoder 45 Assign to connectors 44 Side connectors 38 Contrast 18 Country Selection 32 Custom tint 18 D Decoder 45 Delta volume 21 Demo 35 Devices Watch 12 Digital Radio 30 Services 45 Teletext 23 Dual I/II 21 Dual screen teletext 22 Dynamic contrast 19 E Electronic Programme Guide Use 25 Environmental care 4 Equalizer 21 F Factory setting 36 Favorite lists 24 Fine tune channels 34 H HDCP 38 HDMI cable 38 Home mode 22 Hue 18 K Kensington lock 7 EN-52 L Language Audio 21 Menus 32 Subtitles 28
Q Quick access menu 17 R Radio channels 30 Rearrange channels 34 Recycling product 4 Remote control Advanced use 14 Basic use 6 Batteries 10 Rename channels 34 Reset to factory settings 36 S Safety information 3 SCART cable 39 Screen care 4 Settings Picture Adjust settings 18 Change format 20 Use Settings assistant 18 Use smart settings 19 Sound Adjust settings 21 TV location Change location 22 Setup devices 44 Sharpness 18 Shop mode 22 Side Connectors 5 Controls 5 Sleeptimer 26 Smart settings Current 19 M
Digital TV 28 Language 28 Surround sound Auto 21 Mode 21 S-Video 39 Switch TV Off 11 On 10, 11 On from standby 11 To standby 11 System selection 33 T Technical specifications 47 Teletext Advanced use Cycle subpages 23 Digital teletext 23 Dual screen 22 Enlarge 23 Language 23 Reveal 23 Search 22 Select subpages 22 Teletext 2.5 23 T.O.P broadcasts 22 Timers On timer 26 Sleeptimer 26 Time zone 33 Tint 18 T.O.P.
ENglish Watch Channels 12 Devices 12 U Uninstall channels 34 USB device Connect 28 Disconnect 28 V VESA wall bracket 7 Video formats 47 Volume Adjust 12, 21 Automatic leveling 21 Delta 21 Headphone 21 W Wall mount TV 7 Y Y Pb Pr 39 EN-55
© 2008 Koninklijke Philips Electronics N.V. All rights reserved.