User Manual

1
1 InserttheUSBashdriveintoaUSBport
onyourPC.
2 FromyourPC,navigatetowww.philips.
com/support.
3 Findyourproductandlocatethesoftware
anddriversavailableforyourTVset.
» Thesoftwareisavailableasaziple.
4 Ifthesoftwareversionishigherthanthe
versiononyourTV,clickthesoftware
updatelink.
5 Acceptthelicenseagreementandsavethe
ZIPletotheUSBashdrive.
6 Usingthearchiveutility,extract‘autorun.
upg’totherootdirectoryoftheUSBash
drive.
7 DisconnecttheUSBashdrivefromthe
PC.
Step 3: Update the TV software
Warning
• DonotswitchofftheTVorremovetheUSB
ashdriveduringthesoftwareupdate.
• Ifapowerfailureoccursduringtheupdate,do
notremovetheUSBashdrivefromtheTV.
TheTVwillcontinuetheupdateassoonas
powerisrestored.
• Ifanerroroccursduringtheupdate,retry
theprocedure.Iftheerrorreoccurs,contact
PhilipsConsumerCare.
1 SwitchontheTVandconnecttheUSB
ashdrivecontainingthesoftwareupdate
totheUSBconnectorontheTV.
Update the TV software
Philipsiscontinuallyimprovingitsproducts.To
ensureyourTVisup-to-datewiththelatest
featuresandxes,westronglyrecommendyou
updatetheTVwiththelatestsoftware.Get
softwareupdatesfromyourdealerorwww.philips.
com/support.
What you need
BeforeupdatingtheTVsoftware,ensureyou
havethefollowing:
• AnemptyUSBashdrivewith256MB of
freespace.TheUSBashdrivemustbe
FATorDOS-formatted,andhaveitswrite
protectiondisabled.DonotuseaUSBhard
driveforthesoftwareupdate.
• APCwithInternetaccess.
• AnarchiveutilitythatsupportstheZIP
leformat(forexample,WinZip®for
Microsoft®Windows®orStuft®for
Macintosh®).
Step 1: Check the current TV
software version
BeforeupdatingtheTVsoftware,checkthe
currentsoftwareversionofyourTV.Ifthe
softwareversionofyourTVisthesameasthe
latestupdatelefoundonwww.philips.com/
support,itisnotnecessarytoupdatetheTV
software.
1 Press ontheTVremotecontrol.
2 Select[Setup] > [Software settings] >
[Current software info],thenpressOK.
Theversionofthecurrentsoftwareis
displayed.
Step 2: Download the latest
software
Caution
• Donotinstallalowerversionofsoftwarethan
thecurrentversioninstalledonyourproduct.
Philipscannotbeheldliableorbemade
responsibleforproblemscausedbyasoftware
downgrade.
English
EN