User manual

EN 28
Parental rating
Some digital broadcasters rate their
programs according to age. You can set your
TV to display only programs with age ratings
lower than your child’s age.
1. Press .
2. Select [Setup] > [Channel settings].
3. Select [Child lock] > [Age ratings lock].
A message prompts you to enter the child
lock code.
4. Enter the child lock code with the
Numeric buttons.
5. Select an age rating, then press OK.
All programs above the selected age rating
are blocked.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
Child lock (Page 27).
Display closed caption
You can select to display closed caption at all
times or only when the TV is muted.
Note:
If Digital TV Interactive application is
activated, closed caption text is hidden.
Not all TV programs and commercials
include closed caption information.
Refer to the TV program listings in your area
for information on closed caption text. The
captioned programs are usually list with
service marks, such as 'CC' in the TV listings.
1. While you watch TV, press OPTIONS.
2. Use the Navigation buttons to select
[Closed captions].
3. Select an option, and then press OK.
4. Press OPTIONS.
5. Select [Caption service].
6. Select the correct type of closed caption,
and then press OK.
View Scenea
What you can do
You can display a default picture as the
wallpaper on your TV. You can also load
another picture as the wallpaper.
If the sleeptimer is off, the wallpaper is
displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleeptimer.
What you need
To use another picture as the wallpaper, you
need a USB storage device that contains a
picture that is less than 1 MB in size.
Switch on
1. Press .
2. Select [Scenea], then press OK.
The default picture is displayed.
Note: The wallpaper is displayed for the
duration of the sleeptimer. For more
information on sleeptimer, see Use more of
your TV > Set locks and timers >
Sleeptimer (Page 27).
Set TV wallpaper
You can load another picture as the
wallpaper.
Note: Loading a new picture overrides the
existing picture.
1. Connect the USB storage device to the
TV.
2. Press .
3. Select [Browse USB], then press OK.
4. Select a picture, then press OPTIONS.
5. Select [Set as Scenea], then press OK.
6. Select [Yes], then press OK.
7. Press any button to exit Scenea.