Register your product and get support at www.philips.
Model Serial www.philips.
1 2 3 4 Guide de démarrage 4 Visite guidée du téléviseur Important Positionnement du téléviseur Points forts du produit Accéder à des informations complémentaires 4 10 14 15 Utilisation du téléviseur 17 Aperçu Commandes latérales et indicateurs Télécommande Menus principaux du téléviseur Regarder la télévision Visionnage d'un appareil connecté Utilisation de la fonction Ambilight Accès à Net TV 17 17 17 20 22 24 25 26 Utilisation avancée du téléviseur 33 16 Utilisation du télétexte Chaînes fa
1 Guide de démarrage Visite guidée du téléviseur Télécommande Permet d'ouvrir ou de fermer le menu d'accueil . Le menu d'accueil vous permet d'accéder facilement aux périphériques connectés, aux réglages du son et de l'image ainsi qu'à d'autres fonctions utiles. Pour régler le niveau sonore. Permet d'ouvrir ou de fermer le menu de navigation . Utilisez ces touches pour changer de chaîne TV.
Dans le menu d'expérience, vous pouvez accéder à une gamme de réglages fréquemment utilisés. Permet d'ouvrir ou de fermer le menu d'options . Retour Les menus d'options proposent des réglages pratiques concernant le contenu affiché à l'écran. français *Le guide électronique des programmes (EPG) n'est pas disponible dans tous les pays. . Permet de retourner à la chaîne TV ou au menu précédent. Maintenez cette touche enfoncée pour retourner à l'affichage de la télévision.
Rouge Jaune Permet de sélectionner l'option correspondante, d'accéder aux services de télévision numérique interactive* ou de visionner des clips de démonstration du téléviseur. *Disponible sur certains modèles uniquement. Permet de sélectionner l'option correspondante. Bleu Permet de sélectionner l'option correspondante ou d'ouvrir les Widgets*. *Disponible sur certains modèles uniquement. Vert Permet de sélectionner l'option correspondante ou les réglages à faible consommation d'énergie.
En savoir davantage sur les menus fréquemment utilisés suivants : le menu d'accueil le menu de navigation le menu d'options le menu d'expérience Dans le menu d'accueil , vous pouvez sélectionner la source à visionner, comme une chaîne TV ou un film à partir d'un lecteur de DVD ou d'un lecteur Flash USB connecté. Vous pouvez également ajouter un nouvel appareil ou accédez au menu [Configuration] pour plus de réglages.
Vous pouvez sélectionner le réglage d'image idéal pour les films, les jeux ou la musique. Ou vous pouvez modifier le format de l'image à l'écran. Vous pouvez également modifier les réglages Surround des haut-parleurs. *Disponible sur certains modèles uniquement. Vous pouvez également rechercher la réponse dans Rechercher... Appuyez sur pour sélectionner la visite guidée suivante.
Accédez au menu d'accueil et sélectionnez l'icône du périphérique ajouté. Pour plus d'informations, consultez la rubrique Aide > Connexion du téléviseur > Utilisation de Philips EasyLink (Page 68). Dans Aide > Connexion du téléviseur (Page 55), vous pouvez apprendre à connecter les périphériques les plus courants à l'aide d'illustrations. Exemple : Télévision Haute définition Vous pouvez regarder des programmes haute définition (HD) en qualité d'image HD.
Réseau* Lorsque vous connectez votre téléviseur à votre réseau domestique, vous pouvez écouter de la musique ou visionner des photos et vidéos stockées sur un ordinateur ou tout autre serveur multimédia connecté à ce réseau. Pour en savoir plus, consultez la rubrique Aide > Configuration du téléviseur > Configuration du réseau (Page 47). *Disponible sur certains modèles uniquement. Net TV* Lorsque le réseau PC connecté est relié à Internet, vous pouvez connecter votre téléviseur à Net TV.
Si vous fixez le téléviseur au mur, utilisez uniquement un support mural capable de supporter le poids du téléviseur. Fixez le support mural à un mur capable de supporter à la fois le poids du téléviseur et celui du support mural. Koninklijke Philips Electronics N.V. ne peut en aucun cas être tenu responsable d’un montage mural incorrect ayant occasionné un accident, des blessures ou des dommages.
Fin de vie NonPu blish Votre produit a été conçu et fabriqué avec des matériaux et des composants de haute qualité pouvant être recyclés et réutilisés. Efforts pour l'environnement La présence du symbole de poubelle barrée sur un produit indique que ce dernier est conforme à la directive européenne 2002/96/EC. Veuillez vous renseigner sur votre système de gestion des déchets d'équipements électriques et électroniques.
Nous cherchons en permanence à réduire l'impact environnemental de nos produits grand public innovants. Nos efforts portent sur des procédés de fabrication plus respectueux de l'environnement, la réduction des substances dangereuses, l'optimisation du rendement énergétique pendant l'utilisation, les instructions de fin de vie et le recyclage des produits.
Positionnement du téléviseur Montage mural Pour fixer le téléviseur, achetez un support de téléviseur Philips ou tout autre support de téléviseur compatible.
Pour obtenir la distance de visionnage idéale, multipliez la diagonale de l'écran par trois. Par exemple, si la diagonale de l'écran est de 116 cm, la distance de visionnage idéale est située à environ 3,5 m du téléviseur. Une fois que vous êtes assis, vos yeux doivent être à hauteur du centre de l'écran. Pour un effet Ambilight optimal, positionnez le téléviseur à une distance de 25 cm du mur.
Net TV Sur Internet NonPu blish Net TV vous permet d'accéder à des films, musiques et infoloisirs en ligne depuis votre canapé. Consulter la rubrique Utilisation du téléviseur > Accès à Net TV (Page 26). Pour accéder à Net TV, vous devez connecter votre téléviseur à un réseau. Consultez la rubrique Configuration du téléviseur > Configuration du réseau.
français 2 Utilisation du téléviseur Aperçu Cette section vous donne un aperçu des commandes et fonctions fréquemment utilisées du téléviseur. Commandes latérales et indicateurs NonPu blish 1. Capteur de luminosité / capteur de télécommande / LightGuide*. La fonction LightGuide est disponible sur certains modèles uniquement. Sélectionnez [Configuration] >[Préférences] >[Luminosité LightGuide] pour ajuster la luminosité pour la fonction LightGuide. Télécommande Présentation NonPu blish 1.
4. (Touches de navigation): pour parcourir les menus et sélectionner les options. 5. (Précédent/Suivant): pour changer de chaîne. Permet également de parcourir les pages d'un menu, ainsi que des pistes, albums ou dossiers. 6. OK: pour confirmer une saisie ou une sélection. 13. (Subtitle (Sous-titre)): *pour activer ou désactiver les sous-titres. 14. (Retour): *pour retourner à l'écran de menu précédent. Maintenez cette touche enfoncée pour retourner à l'affichage de la télévision.
Pour la télécommande avec piles plates : français Pour les télécommandes avec piles AAA (bout à bout) : Utilisation Pour les télécommandes avec piles AAA (côte à côte) : NonPu blish Utilisez la télécommande en la tenant à proximité du téléviseur et en la dirigeant vers le capteur de la télécommande. Veillez à ce que la ligne de visibilité entre la télécommande et le téléviseur ne soit pas bloquée par un meuble, un mur ou un autre objet.
Télécommande à l'écran NonPu blish Remarque : disponible si le périphérique connecté est compatible HDMI-CEC. Une télécommande à l'écran vous permet d'accéder facilement aux fonctions courantes. La disponibilité des boutons à l'écran diffère selon la configuration de votre téléviseur et les fonctionnalités du périphérique connecté compatible HDMI-CEC. Pour accéder à la télécommande à l'écran 1. Pendant que vous regardez la télévision ou le contenu d'un périphérique connecté, appuyez sur . 2.
[Guide programmes] : pour accéder au guide électronique des programmes. [Liste chaînes] : pour accéder à la liste des chaînes TV. [Télétexte] : pour accéder au télétexte. 2. Appuyez sur OK pour confirmer votre choix. Expérience Appuyez sur pour accéder au menu d'expérience, qui propose différents paramètres fréquemment utilisés. Ajout d'appareils NonPu blish Une fois l'appareil connecté au téléviseur, ajoutez l'appareil dans le menu d'accueil pour y accéder plus facilement.
Options NonPu blish Les menus d'options présentent des paramètres pratiques liés au contenu de l'écran. 1. Appuyez sur pour afficher les options disponibles. 2. Pour quitter, appuyez à nouveau sur . Regarder la télévision Mise en marche, arrêt et veille Remarques : Le voyant avant ne s'allume pas lorsque le téléviseur est allumé. Le démarrage du téléviseur nécessite un certain temps. Pendant cette période, le téléviseur ne répondra pas à la télécommande ou aux commandes latérales.
Appuyez sur , puis sélectionnez [Liste chaînes] pour utiliser la liste des chaînes. Appuyez sur pour revenir à la chaîne précédente. Saisissez un numéro de chaîne à l'aide des Touches numériques. Utilisez le menu [Son] pour régler le volume du casque. Pour plus d'informations, consultez la rubrique Configuration du téléviseur > Modification des paramètres d'image et de son > Paramètres de son supplémentaires (Page 42).
Utilisation des réglages Smart Sound NonPu blish Utilisez le menu d'expérience [Smart son] pour accéder aux paramètres de son fréquemment utilisés. 1. Pendant que vous regardez la télévision, appuyez sur . 2. Sélectionnez [Smart son], puis sélectionnez l'un des paramètres suivants : [Préférentiel] : pour sélectionner les préférences personnelles que vous avez définies dans les menus [Son] et sous [Configuration].
Configuration d'Ambilight NonPu blish NonPu blish 1. Appuyez sur . 2. Sélectionnez l'appareil à partir du menu d'accueil. 3. Appuyez sur OK pour confirmer votre choix. Le menu Ambilight vous permet d'accéder à d'autres paramètres Ambilight. Lorsque vous regardez la télévision, appuyez sur > [Configuration] > [Paramètres TV] > [Ambilight]. Sélectionnez un paramètre à modifier : [Dynamique] : Permet de régler le mode Ambilight sur Décontracté ou Dynamique.
Réglez la vitesse à laquelle la fonction Ambilight réagit aux images à l'écran. 1. Appuyez sur (Expérience). 2. Sélectionnez [Ambilight dynamique], puis appuyez sur OK. 3. Déplacez le curseur pour régler la réactivité de l'Ambilight. 4. Appuyez sur pour quitter la page. 5. Appuyez sur OK pour confirmer votre choix. Utilisation de la lumière lounge (Disponible sur certains modèles uniquement.
Vous ne pouvez pas télécharger et enregistrer de fichiers ni installer de modules externes sur ce téléviseur. Ce dont vous avez besoin Pour accéder à Net TV, connectez le téléviseur à un routeur bénéficiant d'une connexion Internet haut débit. Pour en savoir plus, consultez la rubrique Configuration du téléviseur > Configuration du réseau. (Page 47) Une fois le téléviseur connecté, appuyez sur , puis sélectionnez [Parcourir Net TV] pour démarrer à l'écran la configuration de Net TV.
Page d'accueil La page d'accueil affiche vos services préférés ainsi que quelques services recommandés. Vous pouvez parcourir Net TV à partir de cette page. Pour revenir à la page d'accueil, appuyez sur (Parcourir). Ouverture d'un service Net TV Sélectionnez un service Net TV à l'aide des Touches de navigation. Pour ouvrir le service sélectionné, appuyez sur OK. Verrouillage d'un service Pour verrouiller un service Net TV, sélectionnez l'icône correspondante, puis appuyez sur (Options).
Sites Web sur Internet Net TV vous permet d'accéder à Internet. Vous pouvez également consulter n'importe quel site Web. Cependant, n'oubliez pas que la plupart des sites Web ne sont pas conçus pour s'afficher sur un écran de télévision et que certains modules externes (nécessaires pour afficher les pages ou les vidéos, par exemple) ne sont pas disponibles sur votre téléviseur.
Service de location de vidéos Avec ce téléviseur, vous avez la possibilité de louer une vidéo sur un site de location de vidéos. 1. Accédez à un site de location de vidéos. Vous devrez peut-être saisir vos informations d'identification ou vous enregistrer. 2. Sélectionnez une vidéo. 3. Effectuez le paiement en ligne. 4. Téléchargez la vidéo. 5. Lancez la vidéo. Ce dont vous avez besoin Pour louer et télécharger une vidéo, votre téléviseur doit bénéficier d'une connexion Internet haut débit.
Les gadgets sont des petits panneaux d'information situés au bas de votre écran. Ils proposent de nombreuses informations, telles que les nouvelles de dernière minute, les films à l'affiche ou des informations sur les voyages par avion. Les gadgets proviennent d'Internet et des nouveautés sont régulièrement ajoutées. Les gadgets ne comportent ni son ni vidéo. Ce dont vous avez besoin Pour afficher les gadgets à l'écran, votre téléviseur doit bénéficier d'une connexion Internet haut débit.
Ce dont vous avez besoin Pour accéder au service de télévision en ligne, votre téléviseur doit disposer d'une connexion Internet à haut débit. Consultez la rubrique Configuration du téléviseur > Configuration du réseau. (Page 47) Ouverture de la télévision en ligne à partir de Net TV Pour ouvrir un service de télévision en ligne à partir de Net TV, appuyez sur , sélectionnez [Parcourir Net TV] et appuyez sur OK.
Utilisation du télétexte Sélection d'une page NonPu blish 1. Appuyez sur . 2. Sélectionnez [Télétexte], puis appuyez sur OK. 3. Pour sélectionner une page, procédez comme suit : entrant un numéro de page à l'aide des Touches numériques. Appuyez sur ou pour afficher la page suivante ou précédente. appuyant sur les Touches de couleur pour sélectionner un élément à code couleur. 4. Appuyez sur pour quitter le télétexte. Accès aux options de télétexte NonPu blish 1. À partir du télétexte, appuyez sur .
Utilisation du télétexte numérique Sélection d'une liste de favoris NonPu blish NonPu blish Certaines chaînes TV numériques proposent des services de télétexte numérique ou des services interactifs spécialisés (BBC1, par exemple). Dans le télétexte numérique : Appuyez sur Touches de navigation pour sélectionner ou mettre en surbrillance des éléments. Sélectionnez une option à l'aide des Touches de couleur, puis appuyez sur OK pour confirmer ou l'activer.
Utilisation des programmations et verrouillages Mise en veille NonPu blish L'arrêt programmé permet de mettre le téléviseur en veille après un laps de temps déterminé. Vous pouvez toujours éteindre votre téléviseur avant l’arrêt programmé ou redéfinir ce dernier pendant le compte à rebours. 1. Appuyez sur . 2. Sélectionnez [Configuration] > [Paramètres TV] > [Préférences] > [Arrêt programmé]. 3. Appuyez sur Touches de navigation pour définir la mise en veille.
Pour des informations sur les codes de verrouillage parental, reportez-vous à la rubrique Utilisation avancée du téléviseur > Utilisation des programmations et verrouillages> Verrouillage parental (Page 35). Remarque : vous trouverez de plus amples informations sur les paramètres de langue dans la rubrique Configuration du téléviseur > Modification des paramètres de langue > Langues audio, des sous-titres et du télétexte (Page 46).
[Lire une fois] : pour lire une fois le fichier dans sa totalité. [Aléatoire désactivé] / [Aléatoire activé] : pour activer ou désactiver l'affichage aléatoire des photos dans le diaporama. [Vitesse diaporama] : pour définir le temps d'affichage de chacune des images du diaporama. [Transition diaporama] : pour définir la transition entre une image et l'image suivante. [Définir sur Scenea] : pour définir l'image sélectionnée en tant que papier peint pour le téléviseur.
[Lire une fois]: pour lire une fois le fichier dans sa totalité. [Aléatoire désactivé] / [Aléatoire activé] : pour activer ou désactiver l'affichage aléatoire des photos dans le diaporama. [Vitesse diaporama] : pour définir le temps d'affichage de chacune des images du diaporama. [Transition diaporama] : pour définir la transition entre une image et l'image suivante. [Définir sur Scenea] : pour définir l'image sélectionnée en tant que papier peint pour le téléviseur.
Définition d'une image en tant que papier peint Scenea NonPu blish Remarque : la taille du fichier de l'image ne peut pas dépasser 1 Mo. 1. Connectez le périphérique de stockage USB au téléviseur. 2. Appuyez sur . 3. Sélectionnez [Parcourir USB], puis appuyez sur OK. 4. Sélectionnez une image, puis appuyez sur . 5. Sélectionnez [Définir sur Scenea], puis appuyez sur OK. 6. Sélectionnez [Oui], puis appuyez sur OK. 7. Appuyez sur n'importe quelle touche pour quitter le mode Scenea.
Remarque : Les touches verte et jaune ne fonctionnent pas si la télécommande EasyLink est activée. Pour plus d'informations, consultez la rubrique Connexion du téléviseur > Utilisation de Philips EasyLink > Fonctionnalités EasyLink (Page 68). Conseil : pour vérifier si une bande-son pour malvoyants est disponible, appuyez sur , puis sélectionnez [Langue audio]. Les langues accompagnées d'un symbole en forme d'œil sont adaptées aux malvoyants. Réglage du volume pour les malvoyants 1.
Modification du réglage de l'image et du son Assistant configuration NonPu blish Utilisez l’assistant de configuration pour vous aider à sélectionner les meilleurs réglages d’image et de son. 1. En regardant la TV, appuyez sur . 2. Sélectionnez [Configuration] > [Paramétrage image/son rapide], puis appuyez sur OK. 3. Sélectionnez [Lancer], puis appuyez sur OK. Suivez les instructions affichées à l'écran pour sélectionner vos paramètres préférés.
[Mode PC] : activé par défaut si vous sélectionnez [Ordinateur] dans le menu d'accueil. Si cette fonction est activée, vous pouvez sélectionner [Format d'image] > [Non mis à l'échelle] qui fournit le maximum de détails pour l'affichage du contenu PC. Si un ordinateur est connecté via HDMI ou VGA, cette option est activée par défaut. [Senseur lumière] : permet d'activer le réglage dynamique de l'écran en fonction des conditions d'éclairage. [Format d'image] : pour changer le format d'image.
Modification des paramètres des chaînes Réorganisation des chaînes NonPu blish Après l'installation, vous souhaiterez peut-être changer l'ordre des chaînes dans la liste en fonction de vos préférences. 1. Pendant que vous regardez la télévision, appuyez sur . 2. Sélectionnez [Liste chaînes], puis appuyez sur OK. 3. Dans la liste des chaînes, appuyez sur . 4. Sélectionnez [Réorganiser], puis appuyez sur OK. 5.
Mise à jour automatique Pour configurer le téléviseur de manière à ce qu'il mette automatiquement à jour les chaînes TV numériques, laissez le téléviseur en mode veille. Une fois par jour, le téléviseur met à jour les chaînes précédemment trouvées et met en mémoire de nouvelles chaînes. Les chaînes vides sont supprimées de la liste des chaînes. Si une mise à jour des chaînes a eu lieu, un message s'affiche au démarrage. Si vous ne souhaitez pas que ce message s'affiche : 1. Appuyez sur . 2.
Accès aux chaînes DVB-S (sur certains modèles uniquement) Si votre satellite est relié au connecteur SAT, vous pouvez recevoir les chaînes par satellite. Appuyez sur > [Regarder par satellite] pour regarder des chaînes par satellite. Installation des chaînes analogiques NonPu blish Cette section explique comment rechercher et mémoriser manuellement des chaînes télévisées analogiques. Étape 1 - Sélection du systèmeRemarque : si les paramètres de langue sont corrects, passez à l'étape suivante.
Si vous recevez la chaîne par câble, les options [Mode débit symbole] et [Débit symbole] sont disponibles. Dans [Mode débit symbole], sélectionnez [Automatique] à moins que votre opérateur de câble ne vous ait fourni une valeur précise pour le débit symbole. Installation des chaînes satellites (Certains modèles uniquement) Si votre satellite est relié au connecteur SAT, vous pouvez recevoir les chaînes par satellite. Remarque : si vous êtes invité à entrer un code, saisissez « 8888 ». 1.
Langue des menus NonPu blish 1. En regardant la TV, appuyez sur . 2. Sélectionnez [Configuration] > [Paramètres TV] > [Préférences] > [Menu langue]. 3. Sélectionnez une langue des menus dans la liste, puis appuyez sur OK. Pour connecter le téléviseur à un réseau PC et à Internet, votre réseau PC doit être équipé d'un routeur. Activez les paramètres DHCP de votre routeur. Connectez le routeur au téléviseur à l'aide d'un câble réseau (Ethernet).
Pour lancer l'installation du réseau par câble, fermez ce manuel d'utilisation, appuyez sur > [Configuration] > [Connexion au réseau], puis sur OK. Suivez les instructions qui s'affichent à l'écran pour installer le réseau filaire. Le téléviseur recherche constamment une connexion réseau. Si vous y êtes invité, acceptez le Contrat de licence utilisateur final. Le Contrat de licence utilisateur final en vigueur est disponible à l'adresse www.philips.com.
Connexion Internet Projeter l'écran de votre PC : Configuration PC requise Caractéristiques techniques recommandées Windows XP, Vista, Windows 7 (PC uniquement) Intel Pentium Core 2 Duo 2,1 GHz 1 Go de RAM 200 Mo d'espace disque disponible Wi-Fi 802.11n Connexion Internet Paramètres réseau NonPu blish Les paramètres réseau du téléviseur permettant la connexion au routeur sont standard et configurés sur Automatique. Cela simplifie la connexion à tout réseau disponible.
Dans le champ Basic Setup (Configuration de base), cliquez sur Clients/Security (Clients/Sécurité). Les paramètres Clients/Security (Clients/Sécurité) s'affichent. Cliquez sur Autoriser automatiquement le partage pour les nouveaux clients, puis sur Enregistrer les modifications. Le partage des fichiers multimédias est autorisé. Ajout de fichiers pour le partage des fichiers multimédias Dans la case Basic Setup (Configuration de base), cliquez sur Sharing (Partage).Les paramètres de partage s'affichent.
Dans Windows Media Player, sélectionnez Library (Bibliothèque) dans le menu, puis Add to Library (Ajouter à la bibliothèque). Vous pouvez maintenant profiter de votre musique, de vos photos ou de vos vidéos sur votre téléviseur.
Affichage de l'horloge du téléviseur 1. Lorsque vous regardez la télévision, appuyez sur . 2. Sélectionnez [Statut], puis appuyez sur OK. L'horloge s'affiche dans le coin inférieur droit de l'écran du téléviseur. Mode magasin ou maison La flexibilité de modification des paramètres est limitée si l'emplacement du téléviseur est défini en mode [Magasin]. Définissez l'emplacement du téléviseur en mode [Maison] pour accéder à tous les paramètres TV.
Disposer d'un moment pour effectuer l'ensemble de la mise à jour. Disposer d'une clé USB d'une capacité de stockage d'au moins 256 Mo. Disposer d'un ordinateur équipé d'un port USB et d'une connexion Internet. 1. Appuyez sur . 2. Sélectionnez [Configuration] > [Mettre à jour le logiciel], puis appuyez sur OK. L'assistant de mise à jour démarre. Suivez les instructions à l'écran pour effectuer la mise à jour.
N'éteignez pas le téléviseur ou ne déconnectez pas le lecteur Flash USB pendant la mise à jour. Si une coupure de courant survient au cours de la mise à jour, ne retirez pas le lecteur flash USB du téléviseur. Le téléviseur reprendra la mise à jour du logiciel une fois le courant revenu. Si une erreur survient pendant la mise à jour, répétez la procédure. Si le voyant d'erreur clignote à nouveau, contactez le Service Consommateurs Philips. 1. Allumez le téléviseur. 2.
Premières connexions Alimentation Antenne Repérez la prise d'antenne à l'arrière du téléviseur. Insérez fermement le câble d'antenne dans la prise. Remarque : pour recevoir les chaînes satellite numériques, insérez le câble d'antenne dans la prise SAT (DVB-S) sur le côté du téléviseur. Disponible sur certains modèles uniquement. NonPu blish Veillez à ce que la fiche du cordon d'alimentation insérée dans la prise secteur soit accessible en permanence.
Ajout d'appareils Lorsque vous connectez un appareil au téléviseur, ajoutez-le en tant qu'option dans le menu d'accueil. L'option dans le menu d'accueil vous permet de faire basculer facilement le téléviseur sur l'appareil. Pour ajouter un nouvel appareil, appuyez sur , puis sélectionnez [Ajouter vos appareils]. Suivez les instructions à l'écran. Insérez les fiches de couleur dans les prises Y Pb Pr de même couleur. La connexion Y Pb Pr prend en charge les signaux de HDTV (haute définition).
Arrière NonPu blish 4. EXT 3 Component (Y Pb Pr) : entrées audio et vidéo analogiques pour appareils analogiques et numériques tels que lecteurs de DVD ou consoles de jeux. 5. : sortie audio stéréo destinée aux casques ou écouteurs. Bas NonPu blish 1. NETWORK : entrée de données à partir du réseau. 2. EXT 2 (SCART) : entrée audio et vidéo analogique pour appareils analogiques et numériques tels que lecteurs de DVD ou consoles de jeux. 3. SERV. U : utilisation par le personnel de Philips uniquement. 1.
4. HDMI ARC : outre la fonction HDMI classique, permet de transmettre le signal audio du téléviseur à un appareil compatible HDMI ARC, tel qu'un système Home Cinéma. 5. AUDIO IN : entrée audio pour ordinateur. 6. ANTENNA : entrée de signal pour antenne, câble ou satellite. 7. VGA : entrée vidéo pour ordinateur. 2. USB : entrée de données à partir de périphériques de stockage USB.3. CI (Interface commune) : logement pour module d'accès conditionnel (CAM). 4. SD CARD : emplacement pour carte mémoire SD.
français Connexion des périphériques Lecteur de disques Blu-ray Utilisez un câble HDMI pour relier le lecteur Blu-ray à l'une des prises HDMI situées au bas du téléviseur. Lecteur de DVD Utilisez un câble HDMI pour relier un lecteur de DVD à l'une des prises HDMI situées au bas du téléviseur. Lecteur/enregistreur de DVD Commencez par relier l'antenne au lecteur de DVD et au téléviseur à l'aide de deux câbles d'antenne.
Puis, utilisez un câble péritel pour relier le lecteur/enregistreur de DVD à la prise péritel située au bas du téléviseur. Système Home Cinéma Commencez par relier l'appareil au téléviseur à l'aide d'un câble HDMI. Puis, utilisez un câble cinch audio numérique pour relier l'appareil au téléviseur. Vous pouvez également utiliser la prise Audio Out L/R analogique.
EasyLink Pour désactiver automatiquement le son des enceintes du téléviseur lorsque le son est diffusé par votre système Home Cinéma, activez EasyLink. Pour en savoir plus, consultez la rubrique Connexion du téléviseur > Utilisation de Philips EasyLink > Configuration des enceintes du téléviseur (Page 70). Lang. Récepteur/satellite Commencez par relier l'antenne au récepteur et au téléviseur à l'aide de deux câbles d'antenne.
Lang. Récepteur et lecteur/enregistreur de DVD Commencez par relier le récepteur numérique au lecteur/enregistreur de DVD et au téléviseur à l'aide de trois câbles d'antenne. Ensuite, utilisez un câble péritel pour relier le récepteur numérique au téléviseur. Enfin, utilisez deux câbles péritel pour relier les deux appareils et le téléviseur.
Lang. Récepteur, lecteur/enregistreur de DVD et Home Cinéma français Commencez par relier les deux appareils et le téléviseur à l'aide de trois câbles d'antenne. Pour finir, utilisez deux câbles péritel pour relier le récepteur numérique au lecteur/enregistreur de DVD, et ce dernier au téléviseur. Ensuite, utilisez un câble HDMI pour relier le système Home Cinéma au téléviseur.
Enfin, utilisez un câble cinch audio numérique pour relier le système Home Cinéma au téléviseur. Lang. Récepteur HD Commencez par relier le récepteur HD numérique au téléviseur à l'aide de deux câbles d'antenne. Utilisez un câble HDMI pour relier le récepteur HD numérique au téléviseur.
Console de jeux Activation du mode Jeu Pour éviter un retard de l'image, réglez le téléviseur sur le mode [Jeu]. 1. Appuyez sur . 2. Sélectionnez [Smart image] > [Jeu], puis appuyez sur OK. 3. Appuyez sur pour quitter. Les connexions les plus pratiques pour une console de jeux se trouvent sur le côté de votre téléviseur. Vous trouverez toutefois d'autres connecteurs à l'arrière du téléviseur si nécessaire.
Lang. Appareil photo Pour afficher les photos de votre appareil photo, connectez-le sur la prise USB située sur le côté du téléviseur. Allumez l'appareil photo numérique. Si le contenu de votre appareil photo ne s'affiche pas automatiquement, vous devrez peut-être activer le protocole PTP (Picture Transfer Protocol) sur votre appareil photo. Reportez-vous aux instructions dans le mode d'emploi de l'appareil photo. Lang.
NonPu blish Avant d'utiliser un décodeur de chaînes numériques péritel, sélectionnez la chaîne à décoder et affectez le décodeur à la prise péritel. 1. Appuyez sur . 2. Sélectionnez [Configuration] > [Paramètres chaînes] > [Décodeur] > [Chaîne]. 3. Définissez la chaîne que vous souhaitez décoder. 4. Sélectionnez [Statut], puis choisissez l'emplacement du décodeur. 5. Appuyez sur OK.
Câble HDMI et adaptateur HDMI-DVI Câble VGA Utilisation de la fonction Philips EasyLink Activation ou désactivation de la fonction EasyLink NonPu blish Philips EasyLink offre différentes fonctionnalités vous permettant de contrôler les appareils connectés sur la prise HDMI. Pour bénéficier de la fonction EasyLink, les appareils connectés doivent prendre en charge la norme HDMI-CEC et doivent être correctement configurés.
NonPu blish Une fois Philips EasyLink activé, les fonctionnalités suivantes sont disponibles : Lecture à l’aide d’une seule touche Lors de la lecture de contenus provenant d'un appareil compatible HDMI-CEC, le téléviseur s'allume à partir du mode de veille et bascule sur la source correspondante.
1. Appuyez sur . 2. Sélectionnez [Configuration] > [Paramètres TV] > [EasyLink] > [Télécommande EasyLink] > [Marche] ou [Arrêt]. 3. Appuyez sur OK pour confirmer l'activation. Remarques : Si vous ne pouvez pas quitter le menu d'un appareil connecté, appuyez sur . Pour repasser en commande du téléviseur, appuyez sur et sélectionnez [Regarder TV]. Pour commander un autre appareil, appuyez sur et sélectionnez l'appareil dans le menu d'accueil.
3. Sélectionnez l'une des options suivantes, puis appuyez sur OK : [TV] : activé par défaut. Les enceintes du téléviseur diffusent le signal audio du téléviseur jusqu'à ce que l'appareil audio HDMI-CEC connecté passe en contrôle audio du système. Dès lors, l'appareil connecté diffuse le signal audio du téléviseur. [Amplificateur] : l'appareil HDMI-CEC connecté diffuse le signal audio.
Ce téléviseur prend en charge les normes CI et CI+. CI+ permet aux fournisseurs de services de proposer du contenu numérique haute définition de qualité bénéficiant d'une protection supérieure contre la copie. Reportez-vous à la documentation fournie par l'opérateur pour savoir comment insérer une carte à puce dans le module de contrôle d'accès. 1. Mettez le téléviseur hors tension. 2.
français 1. Allumez le téléviseur. 2. Ôtez le module d'accès conditionnel du téléviseur avant d'insérer la carte mémoire SD. 3. Insérez la carte mémoire SD dans le logement prévu à cet effet, étiquette orientée vers l'extérieur. Le formatage débutera automatiquement. 4. Laissez en permanence la carte SD dans son logement.
6 Dépannage Nous contacter Si vous ne parvenez pas à résoudre votre problème, consultez la foire aux questions relative à ce téléviseur sur le site www.philips.com/support. Si le problème persiste, contactez le Service Consommateurs Philips de votre pays, dont les coordonnées figurent dans le dépliant fourni avec ce produit. Notez la référence et le numéro de série de votre téléviseur avant de contacter Philips. Ces numéros figurent à l'arrière du téléviseur et sur l'emballage.
Problèmes d'image Le téléviseur est allumé mais l'image est déformée ou elle ne s'affiche pas : Vérifiez que l'antenne est correctement connectée au téléviseur. Vérifiez que le périphérique approprié est sélectionné en tant que source. Vérifiez que le périphérique externe ou la source est correctement connecté(e). Le son fonctionne mais pas l'image : Vérifiez que les réglages de l'image sont correctement définis.
Vérifiez que le volume n'est pas réglé sur 0. Vérifiez que le son n'est pas coupé. Vérifiez que les haut-parleurs sont activés dans le menu Son. Vérifiez que la sortie audio du téléviseur est connectée à l'entrée audio du périphérique HTS compatible HDMI CEC/EasyLink. Le son doit sortir des haut-parleurs HTS. Le téléviseur émet des images mais le son est de mauvaise qualité : Vérifiez que les réglages du son sont correctement définis.
français Problèmes de connexion au réseau (Concerne uniquement certains modèles.) Net TV ne fonctionne pas Si la connexion au routeur est correctement configurée, vérifiez la connexion du routeur à Internet. La navigation sur le PC ou l'accès à Net TV sont lents. Consultez le manuel d'utilisation de votre routeur pour obtenir des informations sur son débit et sur d'autres éléments susceptibles d'affecter la qualité du signal. Une connexion Internet haut débit est nécessaire pour le routeur.
7 Données techniques Présentation NonPu blish Les informations sur le produit sont sujettes à modifications sans notification préalable. Pour des spécifications détaillées, consultez le site www.philips.com/support.
Multimédia Connexions multimédias prises en charge USB (formaté FAT ou DOS ; conforme à la classe « Périphérique de stockage de masse » uniquement) Logement pour carte SD UTP5 Ethernet Fichiers image pris en charge JPEG (*.jpg) Fichiers audio/vidéo pris en charge* AVI (*.avi) : vidéo : MPEG-4 SP, MPEG-4 ASP audio : MPEG couche 2/3, AC3 MPEG (*.mpg, *.mpeg, *.vob) : vidéo : MPEG-1, MPEG-2 MPEG (*.mp2, *.mp3, *.mpg, *.mpeg, *.vob) : audio : MPEG-1 couche 2, MPEG-1 couche 3, LPCM, AC3 MPEG-4 (*.
DIGITAL AUDIO OUT : sortie coaxiale AUDIO IN : mini-jack stéréo 3,5 mm DVI/VGA Antenne : coaxiale 75 ohms VGA : entrée PC Panneau latéral HDMI USB Carte SD Interface commune : CI SAT (DVB-S) : Disponible sur certains modèles uniquement. Dimensions NonPu blish Remarque : Les dimensions et poids ci-dessous sont donnés à titre indicatif. La conception et les caractéristiques sont susceptibles d'être modifiées sans préavis.
Reportez-vous à la légende relative aux dimensions des téléviseurs pour connaître le poids de votre téléviseur sans le pied. UMv 3139 137 03933 - 20100708 FR 81 français Reportez-vous à la légende relative aux dimensions des téléviseurs pour connaître le poids de votre téléviseur avec le pied.
8 Index connexion, appareil - 55 A connexion, PC - 67 accès universel, activation - 39 connexion, décodeur de chaînes - 67 connexion, USB - 36 alimentation - 78 D Ambilight - 15 décodeur - 67 Ambilight, activer - 25 démo - 42 Ambilight, vitesse de réponse - 25 appareils, ajout - 24 désactivation des haut-parleurs du téléviseur - 23 appareils, visionnement - 25 dimensions - 80 arrêt programmé - 35 E C EasyLink, activation - 68 CAM, activation - 72 EasyLink, enceintes du téléviseur - 70
N image smart - 23 Net TV, effacer l'historique - 29 informations, à l'écran - 16 Net TV, parcourir - 27 informations, sur Internet - 16 Net TV, TV en ligne - 31 installation des chaînes (automatique) - 44 niveaux d'âge - 35 installation des chaînes (manuelle) - 45 interface commune - 71 L français I P paramètres de son - 42 paramètres d'image - 41 langue audio - 46 paramètres par défaut - 42 langue, autres - 46 paramètres, image - 41 langue, menu - 47 paramètres, son - 42 liste des chaî
sous-titres, langue - 36, 46 sous-titres, numériques - 36 spécifications techniques - 78 synchronisation audio - 51 T télécommande, à l'écran - 20 télécommande, présentation - 17 télécommande, utilisation - 19 télétexte 2.
© 2009 Koninklijke Philips Electronics N.V. Tous droits réservés.