User manual

3. Refix the battery compartment door.
3.4 Battery Installation
1. Remove the battery compartment door.
2. Install 2 “AAA” or UM-4 (1.5V) batteries or equivalent with the correct polarity
as indicated.
8 EN
NOTE: Remove batteries when they are exhausted or if the remote control is not to be
used for a long time.
BATTERY PRECAUTIONS:
Incorrect use of batteries can cause electrolyte leakage which will corrode the remote
handset or cause the batteries to burst.
Replace both batteries at the same time.
Don’t mix battery types(alkaline with carbon, zinc etc.)
Don’t recharge.
•
•
•