User manual

17EN
4.29 Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1 Press
2 Select
[Setup]
>
[TV settings]
>
[Factory settings] , then press OK.
3 Enter the PIN code(with a default value
of 8888) select RESET, press OK to start
resetting previous settings.
4.30
Install channels
The first time you set up your TV, you are
prompted to select a menu language and to
install TV. Afterwards, you can re-install and
fine tune channels.
4.31 Automatically install channels
1 Press
2 Select [Setup]
>
[Search for channel]
then press
OK
4.32 Manually install channels
Step 1 Search and store new TV
channels
1 Press
2 Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Analogue:
Manual antenna installation] > [Find
channel], then press
OK
• If you know the three-digit
frequency of the channel, enter it.
• To search, select
[Search]
, then
press
OK
3 When the channel is found, select
[Done],
then press
OK
• To store the channel as a new
number, select
[Store as new
channel]
, then press
OK
• To store the channel as the
previously selected channel, select
[Store current channel]
, then press
OK .