operation manual

20
English
13 Access restrictions
This menu allows you to set up the access
restrictions for the digital channels.
1
From the digital mode, press the
key to display the setup menu.
2
Use the ï key to select Access
restrictions and press the Æ key.
3
Press the Æ key to enter into the
Set pin code protection menu.
4
Use the Í Æ keys to set to On option
and press
key to exit.You can then
access the other adjustments.
Warning
The moment you use any kind of access
restriction, you need to fill in the pin
code when you schedule a programme
for recording.
5
To return to previous menu, press the
Í key.
6
Press the key to exit the menu.
• Maturity rating : select your preferred
rating to lock the channel. Maturity rating
will only block certain programmes if the
broadcaster provides data with the
programme.
• TV channels: select the TV channel you
want to lock and press
key.
• Radio stations: select the radio stations
you want to lock and press key.
• Change pin code: press Æ key to
enter in the menu. Follow the on-screen
instruction to change your access code.
The default pin code is 1234. If you have
forgotten your personal code, you can
reset to the default pin code (1234) by
entering the universal code 0711.
Note
The TV is equipped with a Common
Interface (CI) slot (see page 26).
This CI module can be obtained when you
subscribe to service providers like Pay
TV or other service providers. The
CI module does not come with the TV
set.
The Access Restrictions menu will show
the CI Access Restrictions when a CI
module is installed. The CI module is
responsible for the messages and texts
on screen. In case of failure or strange
behaviour, you must call your CI service
provider.
On Off
Set pin code protection
Maturity rating
TV channels
Radio stations
Change pin code
Access restrictions
11:28
Switch pin code protection ‘on’ or ‘off’
Close