Register your product and get suppor t at www.philips.
Contact information Type nr. Product nr.
1.1.1 The remote control 1/12 To adjust the volume. ...
1.1.1 The remote control 2/12 To switch TV channels. ...
1.1.1 The remote control 3/12 To open or close the Home menu h. In the Home menu, you can start or stop a TV activity. Like watching TV or watching a movie from a connected DVD player. ...
1.1.1 The remote control 4/12 To open or close the Browse menu e. In the Browse menu, you can open Text, the Channel list or the TV programme guide. ...
1.1.1 The remote control 5/12 To open or close the Options menu o. In the Options menu, you can select settings related to what is shown on screen. While you watch a channel, mark it as a favourite or stop the slideshow of your photos shown on screen. ...
1.1.1 The remote control 6/12 To open or close the Adjust menu s. In the Adjust menu, you can quickly adjust some picture and sound settings. ...
1.1.1 The remote control 7/12 Back b. With Back you go back to the previous TV channel or go one step back in a menu. ...
1.1.1 The remote control 8/12 Red With the red key, you select the red option or open digital Interactive TV services or some TV demonstration clips. ...
1.1.1 The remote control 9/12 Green With the green key, you select the green option or the Eco settings. ...
1.1.1 The remote control 10/12 Yellow With the yellow key, you select the yellow option or the Help menu. ...
1.1.1 The remote control 11/12 Blue With the blue key, you select the blue option or open the Widgets. ...
1.1.1 The remote control Read more about the remote control in Help > Use your TV > Remote control > Overview. Or go to the ¬ Search page to look for any topic. 12/12 Press u to select the next TV tour.
1.1.2 The menus 1/6 You can operate the TV with the 4 menus. Discover and learn their specific uses. • the Home menu • the Browse menu • the Options menu • the Adjust menu ...
1.1.2 The menus 2/6 To open or close the Home menu h. Open the Home menu as a starting point to operate the TV. In the Home menu, you can start or stop a TV activity. Like watching TV - Watch TV - or watching a movie from a connected DVD player. ...
1.1.2 The menus 3/6 To open or close the Browse menu e. With an activity started in the Home menu, open the Browse menu to find the activity content. While watching TV, you can find a channel in the Channel list or open Text. ...
1.1.2 The menus 4/6 To open or close the Options menu o Open the Options menu to select a setting related to what is shown on screen. While you watch a channel, mark it as a favourite but also open the DVD disc menu while watching a DVD movie. ...
1.1.2 The menus 5/6 To open or close the Adjust menu s Open the Adjust menu to quickly adjust the picture and sound settings. You can set the Smart picture setting to Game, which is ideal for gaming, or change the Surround setting of the TV speakers. ...
1.1.2 The menus Go to the ¬ Search page to look for any topic in Help.
1.1.3 Connecting devices 1/3 To connect a DVD, Blu-ray Disc player or game console, use the HDMI connection. The HDMI connection offers the best picture and sound quality and, if your device has EasyLink (HDMI-CEC), the TV can add the device in the Home menu automatically. ...
1.1.3 Connecting devices When a device is added in the Home menu, you can select it to watch its programme. If the device has no EasyLink or you do not use the HDMI connection, you must add the connected device in the Home menu using Add your devices. 2/3 Read more about Add your devices in Help > Use your TV > Menus > Home menu. Read more about EasyLink in Help > Setup > EasyLink HDMI-CEC. ...
1.1.3 Connecting devices In the chapter Help > Connections, drawings like these help you to connect most common devices.
1.1.4 High Definition TV This TV can display High Definition programmes, but to enjoy HD TV you need to get programmes in HD first. If you are not watching HD programmes, the picture quality will be that of a normal TV. 1/2 Watch HD TV programmes from . . .
1.1.4 High Definition TV 2/2 HD video clip Contact your dealer for more information. To experience the stunning sharpness and picture quality of HD TV, you can start the High Definition video clip from the Home menu. Press Home > Setup > Watch demos (on the second page of the Setup menu). Go to www.philips.com/support to find FAQs featuring the list of HD channels or providers in your country.
1.1.5 PC network and Net TV 1/2 PC network You can connect the TV to your PC network. Enjoy your pictures, videos and music files from your PC on a big TV screen. Read more about PC Network in Help > Setup > Network. ...
1.1.5 PC network and Net TV 2/2 Net TV If you have an Internet connection on your home network, you can connect to Net TV. Net TV offers you online movies, pictures, music, infotainment, games and much more. Read more about Net TV in Help > Use your TV > Net TV. ...
1.1.6 Satellite receiver DVB-S Next to the DVB-T and DVB-C reception, this TV has a built-in satellite DVB-S receiver. You can connect a satellite dish antenna and receive digital satellite channels. Read more about satellite channels in Help > Setup > Satellite channels.
1.2.1 2-in-1 stand The 2-in-1 stand that comes with the TV, can be used as a table-top stand or as a wall mount bracket. Instructions to mount the 2-in-1 stand are also included in the printed Start guide. Read the instructions on the following pages. ...
1.2.1 Wall mounting Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV's weight. Read also the safety precautions before positioning the TV. 2/12 Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. ...
1.2.1 Wall mounting Unmount the TV from the stand if necessary. To wall mount the TV, you need the 2 screws used to fix the TV onto the TV stand and the 2 mounting discs as shown. ...
1.2.1 Wall mounting Unscrew the bolt in the middle of the bar with the supplied hex key.
1.2.1 Wall mounting Turn the bar as shown.
1.2.1 Wall mounting Reposition the bar on the stand and fix the bolt with the hex key.
1.2.1 Wall mounting Fix the stand to the TV.
1.2.1 Wall mounting The TV is mounted at the correct height if your eyes are level with the centre of the screen when you sit down. Distance between the 2 fixing points . . .
1.2.1 Wall mounting Fix the 2 mounting discs. Use screws with a diameter of max 6mm.
1.2.1 Wall mounting Slide the bottom plate of the stand onto the mounting discs.
1.2.1 Wall mounting To level the TV, pull the bottom of the TV towards you slightly and let it slide on the discs.
1.2.1 Table-top stand Unscrew the bolt and turn the bar in the position shown.
1.2.2 VESA info Your TV is prepared for a VESA-compliant wall mount bracket (not included). VESA codes to purchase the bracket: - 81cm/32" VESA MIS-F 100,100,M6 - 94cm/37" VESA MIS-F 200, 300, M6 - 102cm/40" VESA MIS-F 200, 300, M6 - 46PFL8605 : VESA MIS-F 200, 300, M6 - 46PFL9705 : VESA MIS-F 300, 300, M6 Use a screw length as shown in the drawing.
1.2.3 Positioning the TV Carefully read the safety precautions before positioning the TV. • Position the TV where light does not shine directly on the screen. • Dim lighting conditions in the room for best Ambilight effect. • Position the TV up to 25 cm away from the wall for the best Ambilight effect. ...
1.2.3 Viewing distance Position the TV at the ideal viewing distance. Get more from HD TV picture or any picture without straining your eyes. Find the 'sweet spot', right in front of the TV, for the best possible TV experience and relaxed viewing. 2/2 The ideal distance to watch TV from is three times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.
1.2.4 Safety Make sure you have read and understood all instructions before using your TV. The warranty becomes invalid if any damage is caused by failure to follow instructions. Risk of electric shock or fire! • Never expose the TV or remote control to rain, water or excessive heat. 1/6 • Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. .
1.2.4 Safety • Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. • Keep candles and other naked flames away from this product at all times. • Never insert objects into the ventilation slots or other openings on the TV. 2/6 • Ensure power plugs do not come under heavy force. Loose power plugs can cause arcing and are a fire hazard. • Never place the TV or any objects on the power cord.
1.2.4 Safety Risk of injury or damage to the TV! • Two people are required to lift and carry a TV that weighs more than 25 kg. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV. 3/6 • When mounting the TV on a wall, ensure that the wall mount can safely bear the weight of the TV set. Koninklijke Philips Electronics N.V.
1.2.4 Safety Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface. 4/6 • Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support.
1.2.4 Safety 5/6 Risk of overheating! Risk of hearing damage! Always leave a space of at least 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Avoid using earphones or headphones at high volumes or for prolonged periods of time. Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
1.2.4 Screen care • Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. • Unplug the TV before cleaning. • Clean the TV and frame with a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV. • To avoid deformations and colour fading, wipe off water drops as soon as possible. 6/6 • Avoid stationary images as much as possible. Stationary images are images that remain onscreen for extended periods of time.
1.3.1 Power switch Switch the TV on or off with the power switch at the bottom of the TV. When switched off, the TV does not consume any energy. ...
1.3.1 Switching on If the red indicator light is off, switch on the TV with the power switch. If the red indicator is on (standby indication), press O on the remote control to switch on the TV. Alternatively, you can switch on the TV from standby with any key on the TV. It takes a few seconds for the TV to start up.
1.3.2 Volume Press V (Volume) - or + to adjust the volume. Or use the + or - keys on the remote control.
1.3.3 Ambilight Press J (Ambilight), to switch Ambilight on or off. While the TV is on standby, you can switch Ambilight on and create an Ambilight LoungeLight effect in your room.
1.3.4 h Home Press h (Home) to open the Home menu on screen. You can navigate the Home menu with the Volume - or + (left or right) and the Channel - or + (down or up) keys on the TV. To confirm your choice, press h again.
1.3.5 Channel Press CH (Channel) - or + to switch channels. Or use the W or X keys on the remote control.
1.4 Register your TV Congratulations on your purchase and welcome to Philips. Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. Go to www.philips.
1.5.1 Using Help and Search Help You can open Help from the Home menu. In most cases, you can also press the Yellow key on your remote control to open or close Help directly. For some activities, like Text, the colour keys have specific functions and cannot open Help. ...
1.5.1 Using Help and Search Before you follow the Help instructions, close Help. Press the Yellow key or press h to close Help. When you press the Yellow key again, Help will open on the page where you closed it. 2/2 ¬ Search In Help, use ¬ Search to find a topic you need. Select a topic from the list with the navigation keys and press OK. The topic you are looking for might not be present on the first page but a few pages further on. Press x to go to the next page.
1.5.2 Online support To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). Go to www.philips.com/support You can download new TV software or the manual to read on your PC. You can email a specific question or, in some countries, chat online with one of our collaborators.
1.5.3 Contact Philips For support, you can call the Philips Consumer Care hotline in your country. Find the telephone number on the printed documentation that came with the TV. Or consult our website www.philips.com/support TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
2.1.1 Remote control overview 1/5 1 Standby O To switch the TV on or back to standby. 2 Home h To open or close the Home menu. 3 Navigation key To navigate up, down, left or right. 4 OK key To activate a selection. ...
2.1.1 Remote control overview 2/5 5 Browse e To open or close the Browse menu. 6 Next W To switch to the next channel, page or chapter. 7 Previous X To switch to the previous channel, page or chapter. 8 Options o To open or close the Options menu. ...
2.1.1 Remote control overview 3/5 9 Back b To go back to the previous channel. To exit a menu without changing a setting. To go back to the previous Text or Net TV page. 10 Adjust s To open or close the most used settings like picture, sound or Ambilight. 11 Volume V To adjust the volume level. 12 Mute m To mute the sound or to restore it. ...
2.1.1 Remote control overview 4/5 13 Red colour key To open interactive TV or to select a Text page. 14 Green colour key To open the Eco settings or to select a Text page. 15 Yellow colour key To open and close Help or to select a Text page. 16 Blue colour key To open or close Widgets or to select a Text page. ...
2.1.1 Remote control overview 5/5 17 Number keys and text keypad To select a TV channel directly or to enter text. 18 Subtitles j To switch Subtitles on or off. 19 Picture format f To change the Picture format. To learn how to use the remote control, read Help > To begin > TV tour > Remote control.
2.1.2 EasyLink Remote Control The remote control of the TV can also operate a connected device. The device must have EasyLink (HDMI-CEC) and have it switched on. The device must also be connected with an HDMI cable. 1/4 Operate an EasyLink device To operate such a device with the TV remote control, select the device -or its activity- in the h Home menu and press OK. The commands of all keys, except the h key, is forwarded to the device. ...
2.1.2 EasyLink Remote Control If the key you need is not on the TV remote control, you can show extra keys on screen with Show remote control. 2/4 Show remote control keys To show the device keys on screen, press o (Options) and select Show remote control. Select the key you need and press OK. To hide the remote control keys of the device, press b (Back). ...
2.1.2 EasyLink Remote Control 3/4 In general, these keys open the following device menus: 1 Home menu 2 Setup menu 3 Disc menu (disc content) 4 Pop-up menu 5 Options menu 6 Programme guide 7 Media selection ...
2.1.2 EasyLink Remote Control Read more about EasyLink in Help > Setup > Devices > EasyLink HDMI-CEC.
2.1.3 IR sensor Always make sure you point the remote control at the remote control infrared sensor on the front of the TV.
2.1.4 Batteries To replace the batteries of the remote control, slide open the small tray at the bottom of the remote control. Use 2 coin-shaped batteries (Type CR2032 – 3V). Make sure the + side of the batteries (top side) point upwards. The small tray has 2 + indicators. ...
2.1.4 Batteries Remove the batteries if you are not using the remote control for a long time. Dispose of batteries according to the end of use directives. Read Help > To begin > Setting up > End of use.
2.1.5 Cleaning Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV or remote control.
2.2.1 Home h With the Home menu, you can start watching TV or a movie disc or start any other activity. You can add an activity when you connect a device to the TV. Press h to open the Home menu. To start an activity, select it with the navigation keys and press OK. To close the Home menu, press h again. ...
2.2.1 Home h Operate a selected device The TV remote control can operate a device if the device is connected with HDMI and has EasyLink (HDMI-CEC). Read more about EasyLink Remote control in Help > Use your TV > Remote control > EasyLink Remote control. ...
2.2.1 Home h Add a device Devices connected with EasyLink (HDMI-CEC) automatically show their activity in the Home menu. A single device can add several activities. The device must be connected with an HDMI cable. If your connected device does not show itself in the Home menu, EasyLink on the device may be switched off. 3/7 If your connected device does not have EasyLink (HDMICEC) or is not connected with an HDMI cable, you need to manually add your device with Add your devices in the Home menu. ...
2.2.1 Home h 4/7 Add your devices Rename a device In the Home menu, select Add your devices and press OK. Follow the instructions on screen. To rename an added device or activity, press o (Options) and select Rename. Use the keypad on the remote control as you do for SMS/text messaging to enter the new name. The TV asks you to select the device and the connection to which the device is connected. The device or its activities are now added to the Home menu. ...
2.2.1 Home h Delete a device To delete a device or activity from the Home menu, select the item and press o (Options) and then select Remove this device. If a device or activity keeps appearing in the Home menu after you deleted it, switch off the EasyLink setting on the device to prevent this automatic pop-up appearing again. 5/7 Read more about EasyLink in Help > Setup > EasyLink HDMI-CEC. ...
2.2.1 Home h 6/7 Options for a device Reorder To view the available options for a device or activity in the Home menu, select it and press o (Options). You can Rename or Remove devices and activities, Reorder the sequence of them or Restore activities if you deleted one of several activities of a device. To reorder a device or an activity in the Home menu, select it and press o (Options). 1 Select Reorder. 2 With the navigation keys, reposition the device or activity where you want it.
2.2.1 Home h 3 Press OK to confirm the position. All devices and activities shift to the right. You can highlight another device or activity and reposition it. To stop Reorder, press o (Options) and select Exit reorder. 7/7 Restore activities To recall a deleted activity from a device with several activities, select the device or one of its activities and press o (Options). Select Restore activities and press OK. All deleted activities of this device appear again.
2.2.2 Browse e With the Browse menu, you find the channel you want to watch from the Channel list, a future programme from the onscreen Programme guide or a Text page. Press e to open the Browse menu. Select your choice with the navigation keys and press OK. To close the Browse menu, press e again. ...
2.2.2 Browse e Find your content While watching TV, open the Browse menu to open the Channel list, the Programme guide or Text. When other activities are selected in the Home menu, like Browse PC or Browse USB, use the Browse menu to find a picture, music or video stored on your computer or USB. ...
2.2.2 Browse e 3/9 Channel list Channel list options The Channel list shows the TV channels and radio stations installed on your TV. With the Channel list on screen, you can press o (Options) to select the following options : While watching TV, press e to open the Browse menu and select Channel list. Navigate to a channel or station and press OK to watch or listen to the selected channel or station. • Select list Press b (Back) to leave the channel list without changing the channel.
2.2.2 Browse e 4/9 Select list Mark as favourite Use this option to select which channels are shown in the Channel list. The list you select here determines which channels you look through with W and X while watching TV. When a channel is highlighted in the Channel list, you can set it as a favourite channel. Read Use your TV > Watch TV > Favourite channels. ...
2.2.2 Browse e Reorder You can reposition channels within the list. 1 Press o (Options) and select Reorder to start reordering channels. 2 Highlight a channel and press OK. 3 Reposition the channel where you want it with the navigation keys. Alternatively, enter the new position directly with the number keys. 5/9 4 Press OK to confirm the position. You can insert the channel or swap it. You can highlight another channel and do the same. To stop Reorder, press o (Options) and select Exit reorder. ...
2.2.2 Browse e Rename You can rename a channel in the Channel list. 1 In the channel list, highlight the channel you want to rename. 2 Press o (Options) and select Rename to start renaming. You can enter text directly with the remote control keypad or open a full keyboard on top of the text entry menu. ...
2.2.2 Browse e 7/9 Enter text with the remote control keypad Enter text with the on-screen keyboard Use the navigation keys to position the cursor in the text. Press b (Back) to delete a character. To open the on-screen keyboard on top of the text entry menu, press OK when the cursor in the text blinks. Use the remote control keypad as you do for SMS/text messaging to enter a character. Use the 1 key to select a special character. Select Clear to delete a character. Select Done to end Rename.
2.2.2 Browse e To switch from uppercase to lowercase or to a set of special characters, press W (Next) or X (Previous). To edit a character within a line of text, position the cursor on this character and use the z and Z keys at both ends of the on-screen spacebar. To close the on-screen keyboard, highlight Done and press OK. 8/9 Hide channel You can hide a channel in the Channel list. When looking through channels, a hidden channel will be skipped.
2.2.2 Browse e 9/9 Show hidden channels You can recall all hidden channels and unhide them again. 1 In the Channel list, press o (Options) and select Show hidden channels. The Channel list now shows all channels again. 2 Press o (Options) and select Unhide all to unhide the previously hidden channels. Or, if you want to leave the previously hidden channels hidden, press o (Options) and select Exit.
2.2.3 Options o The Options menu gives settings related to what is shown on screen. Depending on what is shown, the Options menu holds different settings. Press o (Options) at any time to see which options are available. To close the Options menu, press o again.
2.2.4 Adjust s With the Adjust menu, you can adjust picture, sound and Ambilight settings quickly. Press s to open the Adjust menu. Select your choice with the navigation keys and press OK. To close the Adjust menu, press s again. ...
2.2.4 Adjust s Benefits In the Adjust menu you can quickly lower or speed up the Ambilight dynamics, adjust the Picture format or shift the picture up a little to view the subtitles and select a preset setting for picture or for sound according to what you are watching. If a Home Theatre System, connected with EasyLink, is forwarding its sound presets, you can select these too.
2.2.4 Adjust s 3/5 Ambilight Smart picture, Smart sound Read more about the Ambilight settings in Help > Use your TV > Use Ambilight. You can set the TV to the pre-defined setting that best suits what you're watching. Picture format Read more about Smart settings in Help > Use your TV > Watch TV > Smart settings Read more about the Picture format settings in Help > Use your TV > Watch TV > Picture format. ...
2.2.4 Adjust s 4/5 Speakers Surround To hear the sound through the TV speakers, close Help, press s (Adjust), select Speakers and select TV. To switch the TV automatically to the best surround sound mode (depending on the programme being broadcast), close Help, press s (Adjust), select Surround and select On. Select Amplifier if you want to hear the sound through a connected Home Theatre System or Amplifier. These settings temporarily override any EasyLink settings.
2.2.4 Adjust s Picture shift You can shift the picture on screen in a vertical or a horizontal direction depending on the TV input. For instance, you can shift the picture up vertically to view subtitles fully. While watching TV, press s (Adjust), select Picture shift and press OK. Shift the picture with the navigation keys. Press OK to stop Picture shift.
2.3.1 Switch channels To watch TV and switch TV channels, make sure the Watch TV activity is selected in the Home menu. To watch TV, press h, select Watch TV and press OK. ...
2.3.1 Switch channels To switch TV channels, press W or X on the remote control. You can use the number keys if you know the channel number or you can use the Channel list to select a channel. To switch back to the previous channel, press b (Back). ...
2.3.1 Switch channels Channel list To open the Channel list, while watching TV, press e to open the Browse menu. Select Channel list and press OK. Select a channel with the navigation keys and press OK to switch to the channel. To leave the Channel list without changing the channel, press b (Back). ...
2.3.1 Switch channels 4/6 Channel list pages Radio channels The channel list can have several pages. To view the next or previous Channel list page, press W or X. If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel. A DVB-C channel installation usually places radio stations from channel number 1001 onwards. You can Reorder and Rename channels or make a channel a favourite.
2.3.1 Switch channels 5/6 Options for watching TV channels What's on With digital TV broadcast, you can see what programme is on now or coming up next, switch Subtitles on or off or even view the channel diagnostics. This option shows information on the current and next programme on this channel. Use the navigation keys to scroll through text or to go to the next column. While watching TV channels, press o (Options) to select an available option.
2.3.1 Switch channels Video selection Digital TV channels can offer multi video signals (multifeed broadcasts), different camera viewpoints or angles of the same event or different programmes on one TV channel. The TV shows a message to advise if any such TV channels are available. When available, press o (Options) and select Video selection to select your choice.
2.3.2 Favourite channels In the Channel list you can mark a channel as a favourite. You can set the Channel list to only show your favourite channels. To open the Channel list, while watching TV, press e (Browse) on your remote control. ...
2.3.2 Favourite channels 2/2 Set up a favourite channel Only watch your favourite channels While watching TV, press e to open the Browse menu. Select Channel list and press OK. Navigate to a channel you want to mark as favourite and press o (Options). Select Mark as favourite. In the Channel list, the favourite channel is marked with a F. You can set the Channel list to show only your favourite channels. You can unmark a favourite channel with Unmark favourite.
2.3.3 Programme guide The Programme guide is an on-screen guide for scheduled TV programmes. You can set a reminder to tell you when a programme is due to start or select programmes by genre. The Programme guide is provided by the broadcaster or Net TV. ...
2.3.3 Programme guide To open the Programme guide, while watching TV, press e to open the Browse menu. Select Programme guide and press OK. To leave the Programme guide without changing a setting, press b (Back). 2/5 First use The first time you open the Programme guide, the TV scans all TV channels for programme guide information. This can take several minutes. This data is stored in the TV. Read also Update Programme guide in the Programme guide options. ...
2.3.3 Programme guide 3/5 Programme guide options • Change day Select a programme with the navigation keys and press o (Options) to select the following : View the previous or next day's programmes. • Set reminder To set an on-screen reminder for when a programme is due to start, select Set reminder and press OK. The programme is marked with ©. To cancel this reminder, select Clear reminder and press OK. • More info Shows the programme details and summary.
2.3.3 Programme guide • Scheduled reminders If a reminder is set, you can view a list of all scheduled reminders. • Update Programme guide After the first scan, the TV stores the programme guide data. If you update or reinstall channels or reorder the Channel list, you will need to update this data. 4/5 To update this data, select Update Programme guide. Reminders are cleared and the new data is stored.
2.3.3 Programme guide 5/5 Broadcaster or Network From the network To select where the Programme guide information comes from, press h > Setup > TV settings > Preferences > Programme guide. Until you link up with Net TV, programme guide information comes from the broadcaster. Once you are connected with Net TV, the TV switches automatically to the Internet for programme guide information. Select From the network or From the broadcaster.
2.3.4 Smart picture and sound settings For easy picture or sound adjustment, you can select a preset setting for each. While watching TV, press s to open the Adjust menu and select Smart picture or Smart sound. Make a selection from the list and press OK. ...
2.3.4 Smart picture and sound settings Smart picture and Smart sound Adjust smart settings Smart settings are a combination of preset settings suited to a specific use like gaming or daylight viewing. To adjust a specific setting of a smart setting, select the smart setting and press OK. Then press h and select Setup. Select TV settings, navigate to the individual setting and adjust it. You can adjust a specific setting like Brightness or Contrast, Bass or Treble, of a chosen smart setting.
2.3.4 Smart picture and sound settings To return to the original smart setting values, undoing the adjustments you made, first set the TV in the smart setting you want to reset. Then press h > Setup > TV settings, select Reset, press OK and confirm. Read more about adjusting separate settings in Help > Setup > Picture, Sound and Ambilight.
2.3.
2.3.5 Picture format If black bars appear on the screen, you can adjust the picture format to a format that fills the screen. While watching TV, press s to open the Adjust menu and select Picture format. Select a format from the list and press OK. ...
2.3.5 Picture format 2/3 Picture formats • Auto zoom The following formats are available according to the picture on screen: Automatically zooms the picture in to fill the screen as much as possible without distortion. Black bars may be visible. Not fit for PC input. • Auto fill • Super zoom Automatically enlarges the picture to fill the screen. Minimal picture distortion, subtitles remain visible. Not fit for PC input. Removes the black bars on the side of 4:3 broadcasts.
2.3.5 Picture format 3/3 • Movie expand • Unscaled Scales the picture to a 16:9 format. Expert mode for HD or PC input. Pixel for pixel display. Black bars may appear with pictures from a PC. • Wide screen Stretches the picture to a 16:9 format.
2.3.6 Switch to standby If the TV is on, press O on the remote control to switch to standby. The red standby key indicator is on. Although the TV consumes very little power when in standby, energy does continue to be consumed. When the TV is not in use for an extended period of time, we recommend you switch the TV off completely with the power switch.
2.4.1 Switch satellite channels To watch satellite channels, press h, select Watch satellite and press OK. ...
2.4.1 Switch satellite channels To switch satellite channels, press W or X on the remote control. You can use the number keys if you know the channel number or you can use the channel list to select a channel. To switch back to the previous channel, press b (Back). ...
2.4.1 Switch satellite channels Channel list for satellite When a satellite installation is performed, the satellite channels are stored in a specific channel list for satellite. Read more about using the channel list in Help > Use your TV > Watch satellite > Channel list.
2.4.2 Channel list for satellite To open the channel list, while watching satellite broadcast, press e to open the Browse menu. Select Channel list and press OK. Select a channel with the navigation keys and press OK to switch to the channel. To leave the Channel list without changing the channel, press b (Back). ...
2.4.2 Channel list for satellite 2/8 Channel list pages Options The channel list can have several pages. To view the next or previous Channel list page, press W or X. With the Channel list on screen, press o (Options) to select : • TV / Radio • Select list • Sort • Mark as favourite • Rename • Reorder • Show hidden channels • Hide channel • Channel lock ...
2.4.2 Channel list for satellite 3/8 TV / Radio Select list Set the list to show TV or Radio channels. Select the list of channels from all satellites or from one specific satellite. Or show a list of only your favourite satellite channels. The list you select here determines which channels you look through with W and X while you are watching TV. ...
2.4.2 Channel list for satellite 4/8 Sort Mark as favourite You can sort the Channel list by Name, Number or in groups of Free to Air and Scrambled channels – Free / scrambled. In the Channel list, navigate to a channel you want to mark as favourite and press o (Options). Select Mark as favourite. In the list, the favourite channel is marked with a F. You can unmark a favourite channel with Unmark favourite. ...
2.4.2 Channel list for satellite 5/8 Only watch your favourites Reorder and Rename You can set the Channel list to show only your favourite channels. With the list on screen, press o (Options) and select Select list. Select Favourites from the list and press OK. You can reposition channels within the list or rename a channel. With the Favourites list selected, you will only see your favourite channels when you look through the channels.
2.4.2 Channel list for satellite 6/8 Hide channel Show hidden channels You can hide a channel in the Channel list. You can recall all hidden channels and unhide them again. Read more about Hide channel in Help > Use your TV > Menus > e Browse. Read more about Show hidden channels in Help > Use your TV > Menus > e Browse. ...
2.4.2 Channel list for satellite Satellite channel lock You can lock a satellite channel. To watch a locked channel, you need to enter the 4 digit child lock code to unlock. You can lock as many channels you like. 7/8 To lock a channel in the Channel list, press o (Options) and select Channel lock. Enter your 4 digit child lock code. Select any channel in the list, press o again and select Lock channel. A locked channel is marked with a k. Now, you can select another channel to lock or unlock.
2.4.2 Channel list for satellite Change the child lock code To change this 4 digit code, press h and select Setup > Satellite settings and select Child lock > Change code. 8/8 Read more about Child lock and Parental rating in Help > Use your TV > Watch satellite > Child lock.
2.4.3 Favourite satellite channels You can set up your own favourite satellite channels and create a list with only your favourites to look through. 1/2 Mark as favourite In the Channel list, navigate to a channel you want to mark as favourite and press o (Options). Select Mark as favourite. In the list, the favourite channel is marked with a F. You can unmark a favourite channel with Unmark favourite. ...
2.4.3 Favourite satellite channels Only watch your favourites You can set the Channel list to show only your favourite channels. With the list on screen, press o (Options) and select Select list. Select Favourites from the list and press OK. With the Favourites list selected, you will only see your favourite channels when you look through the channels. 2/2 Read more about the options in the Channel list for satellite in Help > Use your TV > Watch satellite > Channel list.
2.4.4 Child lock for satellite channels To prevent children from watching a channel or a programme, you can lock channels or block age-rated programmes. 1/4 Lock a channel To lock a channel, use the Channel lock option in the Channel list. Read more about Channel lock in Help > Use your TV > Watch satellite > Channel list. ...
2.4.4 Child lock Parental rating Some digital broadcasters have programmes rated. When the rating is equal or higher than the rating you have set for your child’s age, the programme will be blocked. 2/4 To watch a blocked programme you must enter the Child lock code. The satellite parental rating is set for all satellite channels. ...
2.4.4 Child lock Set an age rating Press h and select Setup > Satellite settings and select Parental rating. To select an age rating, you must first enter your 4 digit child lock code. If no child lock code is set yet, you can set the code now. 3/4 When the code is entered, you can select the age rating. When the rating of a programme is equal or higher than the rating you have set for your child's age, the programme will be blocked. The TV will ask for the code to unblock the programme.
2.4.4 Child lock 4/4 Change code Forgotten your code ? To change the current code, press h and select Setup > Channel settings and select Child lock > Change code. To override the code in case you forget it, enter 8888. Enter the current code and then enter the new code twice. The new code is set.
2.5.1 Select a device When a connected devices is added to the Home menu, you can easily select it. To select and watch a connected device or activity, press h to open the Home menu and select the device or its activity and press OK. Make sure the device is switched on. Read more about Add your devices in Help > Use your TV > Menus > Home menu.
2.5.2 Use the remote control The TV remote control can operate a device if the device is connected with HDMI and has EasyLink (HDMI-CEC). Read more about EasyLink Remote control in Help > Use your TV > Remote control > EasyLink Remote control.
2.6.1 Benefits With Ambilight, you enjoy a more relaxed viewing experience and improved perceived picture quality. Dim the lighting conditions in the room and position the TV up to 25cm away from the wall for the best Ambilight effect. To prevent poor infrared remote control reception, position your devices out of sight of Ambilight.
2.6.2 Adjust Ambilight You can use the Adjust menu to set the most used Ambilight settings. While watching TV, press s to open the Adjust menu. To close the Adjust menu, press s again. ...
2.6.2 Adjust Ambilight 2/3 Switch Ambilight on or off Ambilight brightness In the Adjust menu, select Ambilight and press OK. Switch Ambilight On or Off. In the Adjust menu, select Ambilight brightness and press OK. Adjust the light output of Ambilight. Ambilight dynamic ... In the Adjust menu, select Ambilight dynamic and press OK. Adjust the speed at which Ambilight responds to onscreen images.
2.6.2 Adjust Ambilight Ambilight colour In the Adjust menu, select Ambilight colour and press OK. Select Dynamic, if Ambilight should respond to onscreen images or select one of the fixed colours. Select Custom if you want to set a specific fixed colour. 3/3 Read more about Ambilight settings in Help > Use your TV > Use Ambilight > Setup.
2.6.3 Ambilight setup As well as the settings in the Adjust menu, Ambilight offers some advanced settings. You can set a fixed colour of your own or a delayed Ambilight switch off after you switched off the TV. To open the Ambilight menu, press h and select Setup > TV settings > Ambilight. 1/4 Custom colour To set a Ambilight colour of your own, select Custom in the Ambilight Colour menu. With Custom selected, you can open the Custom colour menu. Select Palette to choose your own colour.
2.6.3 Ambilight setup 2/4 Separation TV switch off To set the difference in colour level between the lights on each side of the TV, select Separation. Separation Off gives a dynamic but uniform Ambilight colour. To set Ambilight to fade out and switch off a few seconds after you have switched off the TV, select TV switch off. Allow Ambilight to fade out and switch off completely before you switch the TV back on again. ...
2.6.3 Ambilight setup 3/4 Scenea lounge light Wall colour To always switch off Ambilight when Scenea is switched on, select Scenea lounge light and select Off. The colour of the wall behind your TV can influence the colour effect of Ambilight. To correct this influence, select Wall colour and select a colour that matches the wall colour. Ambilight will correct its colours to mix best with the colour of the wall behind the TV. ...
2.6.3 Ambilight setup Lounge light mood Read more about Lounge light mood in Help > Use your TV > Use Ambilight > Lounge light mood.
2.6.4 Lounge light mood When the TV is on standby, you can switch Ambilight on and create a Lounge light mood in your room. To switch Ambilight on while the TV is on standby, press J on the TV. ...
2.6.4 Lounge light mood To change the Lounge light mood colour scheme, press J on the TV again. To switch off Lounge light mood, press and hold J on the TV for 3 seconds. 2/2 You can also set up the colour scheme in the Setup menu. With the TV switched on, press h and select Setup. Select TV settings > Ambilight > Lounge light mood. Select the colour scheme with which Lounge light mood will start up.
2.7.1 What is Net TV ? Net TV offers Internet services and websites tailored for your TV. You can visit popular sites, look at infotainment, rent a movie from a video store, watch a TV show you missed or open practical widgets on your TV screen. 1/4 Net TV pages The most popular websites in your country have tailored their web pages for use on TV. Read the newspaper headlines, watch the latest video hit or check the weather forecast. ...
2.7.1 What is Net TV ? 2/4 Net TV programme guide Missed a programme? Once you are connected to Net TV, the TV programme guide uses the Internet to gather its information. If a broadcaster offers this service, you can catch-up with a favourite programme you missed. Watch this programme when it suits you. Video stores With Net TV you can rent your favourite movie from an online rental video store. Read more about Net TV in the following chapters. ...
2.7.1 What is Net TV ? 3/4 New services Specifics New services are added regularly. Consult the Net TV pages from time to time to discover the newly-added services. • The availability of Net TV services vary per country. • With Net TV you can also link up to the Internet. You can view any website you like but remember that most Internet websites are not tailored to be viewed on a TV screen and certain plug-ins (e.g. to view pages or videos) are not available on your TV. ...
2.7.1 What is Net TV ? • Net TV online services can be added, changed or stopped. • Net TV shows one page at a time and full screen. • You cannot download and save files or install plug-ins.
2.7.2 What you need To enjoy Net TV, you need to connect the TV to a router with a high-speed connection to the Internet. Read Help > Setup > Network. ...
2.7.2 What you need Once the connection is made, select Browse Net TV in the Home menu to start the Net TV on-screen setup. Read Help > Use your TV > Net TV > First use.
2.7.3 First use 1/5 1 Agree to the Terms of Use. How to register 2 Register for Net TV. To register, you need an email address and a PC connected to the Internet. If you skip the registration at first use, you can register from the Net TV Start page later on. 3 Switch on Parental control. Net TV is ready for use. ...
2.7.3 First use To start the Net TV registration, enter your email address on screen. To open the on-screen keyboard, press OK with the text field highlighted. Enter the characters one by one. Select Register and press OK. 2/5 A message will appear if a registration email has been send to your email address. Open the email on your PC and click the link to the registration form. Complete the form and click the button to submit. On the TV, select OK and press OK to open the Net TV Start page. ...
2.7.3 First use Switch on Parental control The first time you open the Net TV Start page, you can switch on Parental control. If you switch on Parental control, you need to enter a personal lock/unlock code. Enter a 4 digit code as your Net TV lock/unlock code. 3/5 Use the number keys on the remote control. Enter the same code again to confirm. Net TV is ready to use. ...
2.7.3 First use Registration benefits When you have registered, your favourite or locked Net TV pages are stored as a back-up. Also, the last 16 web addresses (URLs) you visit are stored. You can share these pages with another Net TV television if you register that TV with the same email address. 4/5 When registered, you can restore these selected pages after an accidental reset of Net TV with Clear history. ...
2.7.3 First use 5/5 Parental control benefits Parental control specifics With Parental control switched on ... • Only services on the Net TV pages can be locked. Advertisements and Internet websites cannot be locked. • you can lock and unlock services and/or categories of services • some services that are not suitable for children are locked from the start but can be unlocked • Services are locked per country. Categories are locked for all countries.
2.7.4 Browse Net TV To open Net TV, close this Help and press h, select Browse Net TV and press OK. The TV links up to Net TV and opens the Start page. To exit Net TV, press h and select another activity. ...
2.7.4 Browse Net TV 2/12 The F Start page Open a Net TV service The F Start page shows your favourite services and some recommended services. You can browse Net TV from this page. Select a Net TV service with u or v, w or x keys. To open a selected service, press OK. To return to the F Start page, press e (Browse). A closing lock animation means that the page you have opened is a secure page. ...
2.7.4 Browse Net TV 3/12 Navigate a Net TV service All services Navigating a Net TV service can differ from using another service. You can mainly use the navigation keys and the OK key to browse the service. Some services indicate how to browse their service. To view the available services for your country, select † Services and press OK. To go back one page, press b (Back). On this page, you can view all services or view them by category, e.g. News or Entertainment.
2.7.4 Browse Net TV 4/12 Options Lock service Press o (Options) to select the following: To lock a Net TV service, select its icon and press o (Options). Select Lock service and press OK. The service icon is marked with a k. • Lock service • Mark favourite • Disable parental control • Show remote control • Reload page • Zoom page • Security info • Clear Net TV memory To open a locked service, you must enter your 4 digit code. Once you have opened a locked service, you can delete the lock. ...
2.7.4 Browse Net TV Mark favourites To mark a service as a favourite, select the service icon and press o (Options). Select Mark favourite and press OK. You can mark up to 12 services as favourites. All of your favourite services are shown in the F Start page. In † Services, favourite services are marked with a star F. 5/12 Only Net TV services can be marked as favourites. Advertisements and Internet websites cannot be marked.
2.7.4 Browse Net TV 6/12 Disable parental control Show remote control To switch off Parental control, press o (Options) and select Disable parental control. Enter the 4 digit code to disable Parental control. Keys like Play x, Rewind T and Fast Forward Q can be called up with Show remote control. Press o (Options) and select Show remote control. With these keys on screen, you can operate audio or video players. Select a key and press OK to carry out its function.
2.7.4 Browse Net TV 7/12 Reload page Zoom page If something went wrong during the loading of a page, you can try and reload it. Press o (Options) and select Reload page. To zoom an Internet page in or out, press o (Options) and select Zoom page. Use the slider bar to set the enlargement. To scroll through an Internet page, use the navigation keys to jump from highlight to highlight. ...
2.7.4 Browse Net TV 8/12 Security info Clear Net TV memory To view a page's security information, press o (Options) and select Security info. ‹ Warning - this option resets Net TV completely. To clear the Net TV memory completely, including your Favourite, the Parental control code, passwords, cookies and history, press o (options) and select Clear Net TV memory. ...
2.7.4 Browse Net TV Net TV services for another country Another country might have other services available. To switch to the services of another country, select Country : … at the bottom right of the page and press OK. Select a country and press OK. 9/12 Koninklijke Philips Electronics N.V. bears no responsibility regarding the content and the quality of the content provided by the content service providers. ...
2.7.4 Browse Net TV 10/12 Internet websites Open an Internet site With Net TV you can also link up to the Internet. You can view any website you like but remember that most Internet websites are not meant to be viewed on a TV screen and certain plug-ins (e.g. to view pages or videos) are not available on your TV. To go to an Internet page, select fi Internet and press OK. Using the on-screen keyboard, you can enter the web address you need.
2.7.4 Browse Net TV Use the u or v, w or x keys to navigate to the available links on an open Internet page, press OK to go to the link. 11/12 Internet history Net TV will automatically add every site you visit to the history list. Later, you can select a site icon in the list and press OK to open it. To scroll through the history list, use the navigation keys. ...
2.7.4 Browse Net TV Clear Net TV history With a site icon selected in the history list, you can clear the whole list. Press o (Options) and select Clear history.
2.7.5 Video stores With this TV, you can rent a video from an online video store. 1 Open a video store. 2 Select a video. 3 Make the online payment. 4 Download the video. 5 Start watching. 1/6 What you need To rent and download a video, you need a highspeed Internet connection to the TV. Read more about connecting to the network in Help > Setup > Network. You also need an SD memory card to insert in the TV SD card slot. ...
2.7.5 Video stores Formatting an SD card To format an SD memory card as video memory, insert the SD card in the SD slot. The TV will automatically start formatting the SD card. The TV could reject the SD card if the write speed is insufficient for video transfer. Once formatted, leave the card permanently in the slot. ...
2.7.5 Video stores View a video store To view a video store, press h, select Net TV > Video stores and press OK. The Video stores page shows the available stores for your country. To view a store, select its icon and press OK. ...
2.7.5 Video stores 4/6 Rent a video Payment To rent a video, select its icon on the video store page and press OK. In most cases you can rent a video for 1 day or for a couple of days or even just 1 hour. The way you select and rent a video varies from store to store. The store will ask you to log in or to open a new log in account if you don't already have one. The login might consist of your email address and a personal PIN code.
2.7.5 Video stores To enter a number code (PIN), use the numbers on the remote control. To enter an email address, select the text field on the page and press OK. Select a character on the keyboard and press OK to enter it. ...
2.7.5 Video stores 6/6 Download the video Start watching Once the payment is complete, you can download the video on the video memory. During the download, you can carry on watching the normal programme until the TV notifies you that the video is ready to play. If you cancel a download, you can still download the video until the rental period expires. To start watching a downloaded video, press h, select Net TV > Video stores and press OK.
2.7.6 Widgets Widgets are small information panels at the bottom of your screen. They offer information on a variety of subjects, like breaking news, scheduled movies or airport info. Widgets come from the Internet and new widgets are added regularly. Widgets do not have sound or video. 1/6 What you need To show Widgets on screen, you need a high-speed Internet connection to the TV. Read more about connecting to the network in Help > Setup > Network. ...
2.7.6 Widgets Show Widgets To open the Widgets, press h, select Show Widgets and press OK. Also, you can open or close the Widgets directly with the Blue key on the remote control. The Widgets appear at the bottom of the screen. ...
2.7.6 Widgets 3/6 You can replace the initial Widgets with other Widgets. Open a Widget Select a Widget To open a Widget as a full page on screen, select the Widget and press OK. To select a Widget, press w or x to position the selection highlight. Although only 4 Widgets are shown on screen, more Widgets can be added. ...
2.7.6 Widgets 4/6 Options Setup Widget With the Widgets on screen, press o (Options) to select the following: To set up a Widget, select the Widget and press o (Options) and select Setup Widget. • Setup Widget • Add Widget • Remove Widget • Move Widget • Switch view To enter text, select the text field on the page and press OK. Select a character on the keyboard and press OK to enter it. ...
2.7.6 Widgets 5/6 Add Widget Remove Widget To add a Widget, press o (Options) and select Add Widget. Scroll through the Widget collection with w or x to look for a Widget. To add a Widget, select the Widget and press OK. To remove a Widget, press o (Options) and select Remove Widget. ...
2.7.6 Widgets 6/6 Move Widget Switch view To move a Widget within the list on screen, press o (Options) and select Move Widget. Press w or x to reposition the Widget and press OK. If Widgets hide subtitles or other information on screen, you can move the TV image upwards. To view the Widgets on top of the TV picture or underneath it, press o (Options) and select Switch view. The availability of Widgets varies by country.
2.7.7 Online TV Some digital broadcasters offer an Online TV service. With Online TV you can watch a programme you missed. Link up with the broadcasters Online TV page to see what programmes are available. 1/2 What you need To link up with an Online TV service, you need a highspeed Internet connection to the TV. Read more about connecting to the network in Help > Setup > Network. ...
2.7.7 Online TV 2/2 Open Online TV from Net TV Open Online TV on a channel To open an Online TV service from Net TV, press h, select Browse Net TV and press OK. In the Net TV services, look for the icon of the TV channel that broadcasts the programme you want. Select the service and press OK. To open the Online TV service of a TV channel directly, press the Red key. If this service is available, the TV will open the page of the broadcaster. The availability of Online TV services varies by country.
3.1.1 Text pages Open Text To open Text, while watching TV, press e (Browse) and select Text. To close Text, press b (Back). ...
3.1.1 Text pages Select a Text page To select a page … • Enter the page number with the number keys. • Press W or X • Press u or v. • Press a colour key to select a colour-coded subject at the bottom of the screen. ...
3.1.1 Text pages 3/6 Text sub-pages T.O.P. Text pages A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. Some broadcasters offer T.O.P. Text. To select a subpage, press w or x. To open T.O.P. Text within Text, press o (Options) and select T.O.P. overview. ...
3.1.1 Text pages Search Text You can select a word and scan Text for all instances where this word reoccurs. This a practical way to look for a specific subject. 4/6 Open a Text page and press OK. Select a word or number with the navigation keys. Now press OK again to jump immediately to the next occurrence of this word or number. Press OK again to jump to the subsequent occurrence. To stop the search, press u until nothing is selected.
3.1.1 Text pages Text from a connected device Some connected devices that receive TV channels can also offer Text. 5/6 To open Text from a connected device, press h, select the device and press OK. While watching a channel, press o (Options), select Show remote control and select the B key and press OK. Press b (Back) to hide the remote control keys. To close Text, press b (Back).
3.1.1 Text setup 6/6 Digital text (UK only) To close Digital text, press b (Back). Some digital TV broadcasters offer dedicated digital text or interactive services on their digital TV channels. These services include normal Text using the number, colour and navigation keys to select and navigate. Digital text is blocked when subtitles are broadcast and Subtitle On is set in the Subtitle menu. Select Subtitles Off to allow Digital text.
3.1.2 Text options 1/3 In Text, press o (Options) to select the following: Freeze page • Freeze page To stop the automatic rotation of subpages, press o (Options) and select Freeze page. • Dual screen • T.O.P. overview • Enlarge • Reveal • Cycle subpages • Language ...
3.1.2 Text options 2/3 Dual screen / Full screen T.O.P. overview To show the TV channel and Text alongside each other, press o (Options) and select Dual screen. Select Full screen to switch back to full screen view. To open T.O.P. Text, press o (Options) and select T.O.P. overview. Enlarge To enlarge the Text page for more comfortable reading, press o (Options) and select Enlarge. To scroll down the page, press v or u. ...
3.1.2 Text options 3/3 Reveal Language To unhide hidden information on a page, press o (Options) and select Reveal. To switch the group of characters that Text uses to display correctly, press o (Options) and select Language. Cycle subpages To cycle subpage when these are available, press o (Options) and select Cycle subpages.
3.1.3 Text setup Text language Some digital TV broadcasters have several Text languages available. 1/2 To set your primary and secondary Text language, press h > Set up > Channel settings and select Primary or Secondary Text and select your preferred Text languages. ...
3.1.3 Text setup Text 2.5 If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch it off, select h > Setup > TV settings > Preferences > Text 2.5.
3.2.1 Benefits Interactive TV can offer additional infotainment or programmes on a digital TV channel. Interactive TV is dependent on the country or broadcast. Benefits range from enhanced text to online TV and much more. For some iTV services, you need a high-speed connection to the Internet. Read Help > Setup > Network.
3.2.2 Use iTV To open iTV, press the Red key while watching a digital channel. If interactive TV is available, the Home page of the broadcaster opens. To close iTV, press b (Back) repeatedly until the iTV page closes.
3.3.1 Browse USB You can view photos or play your music and videos from a USB memory device. Insert a USB device in the USB connection on the left-hand side of the TV while the TV is switched on. The TV detects the device and opens a list showing its content. If the list does not appear automatically, press h, select Browse USB and press OK. ...
3.3.1 Browse USB 2/6 To close Browse USB, press h and select another activity or disconnect the USB device. To pause or play the slideshow again, press OK. View photos To view the previous photo, press X. To view photos, select a photo in the list and press OK. If there are more photos in the folder, the TV starts a slideshow of these photos. ... To stop, press o (Options) and select Stop. To view the next photo, press W.
3.3.1 Browse USB 3/6 Options for photos Shuffle on Press o (Options) to select the following: Plays the files randomly. • Show info • Stop • Play once / Repeat • Rotate • Shuffle on / off • Slideshow speed • Slideshow transition • Set as Scenea Set as Scenea Sets the current photo as a wallpaper photo for Scenea. ...
3.3.1 Browse USB Play videos or music To play videos or music, select the file in the list and press OK. If there are more music or video files in the folder, the TV plays the files one after the other. To stop, press o (Options). 4/6 To pause or play, press OK. To play the next file in the folder, press W. To play to the previous file, press X. To fast forward, press x. To rewind, press w. ...
3.3.1 Browse USB 5/6 Options for music and videos Music with photos Press o (Options) to select the following: You can play music and show photos at the same time. You must start the music first then the photos. • Stop • Play once / Repeat • Shuffle on / off 1 Select a folder with music files and press OK. 2 Select a folder with photo files and press OK. To stop, press o (Options) and select Stop. ...
3.3.1 Browse USB Mute screen If you only listen to music, you can mute the TV screen to save energy. To mute the screen, press the Green key, select Mute screen and press OK. To switch the screen back on, press any key on the remote control. 6/6 See the list of compatible playback formats in Help > Specifications > Multimedia.
3.3.2 Browse PC You can view photos or play your music and videos from a PC in your home network. 1/2 What you need To browse these PC files, you need to connect the TV to your home network. You also need to set the PC media server software to share the files with the TV. Read more about connecting to a network in Help > Setup > Network. ...
3.3.2 Browse PC Browse PC To browse your PC files, press h, select Browse PC and press OK. If the network is not yet installed when you select Browse PC, Network installation starts automatically. Follow the instructions on screen. To close Browse PC, press h and select another activity. 2/2 To select, view and play your files, read Help > More on … > Multimedia > Browse USB. See the list of compatible playback formats in Help > Specifications > Multimedia.
3.3.3 Scenea With Scenea, you can set a photo as a painting on your TV screen. Select your favourite photo from your collection. To open Scenea, press h, select Scenea and press OK. If you did not yet select a photo of your own, a preset photo is shown. To close the Scenea photo, press a key on the remote control. ...
3.3.3 Scenea 2/4 Select a photo for Scenea Scenea lounge light 1 Select a photo from a connected USB device or from a connected PC. This photo must be in JPEG format. To switch off Ambilight when Scenea is on, press s (Adjust). Or press J (Ambilight) on the front of the TV. 2 With the photo highlighted in the Browse USB or Browse PC list, press o (Options) , select Set as Scenea and press OK. By agreeing to overwrite the current photo, the new photo is set. ...
3.3.3 Scenea 3/4 Energy saving Specifics To switch the TV to the energy conscious setting, press s (Adjust), select Smart picture and press OK. Select Energy saving. With Scenea switched on, the TV will automatically switch to standby after 4 hours. You will be warned 1 minute before switch off. This automatic switch to standby prevents unnecessary energy use in case you forget that Scenea is on. ...
3.3.3 Scenea If the Sleep timer is set, the TV will also switch to standby after the set time has elapsed. Scenea has no sound.
3.4.1 Child locks To prevent children from watching a channel or a programme, you can lock channels or block age-rated programmes. 1/5 Parental rating Some digital broadcasters have programmes rated. When the rating is equal or higher than the rating you have set for your child’s age, the programme will be blocked. ...
3.4.1 Child locks To watch a blocked programme you must enter the Child lock code. The parental age rating is set for all channels. 2/5 Set an age rating Press h and select Setup > Channel settings and select Child lock > Parental rating. To select an age rating, you must first enter your 4 digit child lock code. If no child lock code is set, you can set the code now. ...
3.4.1 Child locks When the code is entered, you can select the age rating. When the rating of a programme is equal or higher than the rating you have set for your child's age, the programme will be blocked. The TV will ask for the code to unblock the programme. For some operators, the TV only blocks programmes with a higher rating. 3/5 Lock a channel To lock a channel, press h and select Setup > Channel settings and select Child lock > Channel lock.
3.4.1 Child locks 4/5 In the list, a locked channel is marked with an X. Now, you can select another channel to lock or unlock. The lock is activated as soon as you close the menu. Change code You cannot lock programmes from connected devices. Enter the current code and then enter the new code twice. The new code is set. To change the current code, press h and select Setup > Channel settings and select Child lock > Change code.
3.4.1 Child locks Forgotten your code ? To override the code if you forget it, enter 8888.
3.4.2 Sleep timer With Sleep timer you can switch the TV to standby at a specified time. To set the sleep timer, press h > Setup > TV settings > Preferences > Sleep timer. With the slider bar you can set the time up to 180 minutes in increments of 5 minutes. If set to 0 minutes, Sleep timer is switched off. You can always switch off your TV earlier or reset the time during the countdown.
3.5.1 Subtitles Programme subtitles are available most of the time. You can set subtitles to be constantly displayed. How to set constant subtitles depends on whether a channel is analogue or digital. For digital channels, a preferred subtitle language can be set. 1/4 For analogue channels To show subtitles of a channel, switch to the channel and press e (Browse), select Text and press OK. Enter the number of the page that shows subtitles, usually 888, and press e (Browse) again to close Text.
3.5.1 Subtitles For digital channels There is no need to activate subtitles in Text for digital channels. You can set a preferred primary and secondary subtitle language. If these subtitle languages are not available for a channel, you can select another available subtitle language. 2/4 To set the primary and secondary subtitle language, press h and select Setup > Channel settings and select Languages > Primary and Secondary subtitles. ...
3.5.1 Subtitles To select a subtitle language when none of your preferred languages is shown, press o (Options), select Subtitle language and select a language you want temporarily. Subtitle menu To open the subtitle menu, press j. ...
3.5.1 Subtitles In the Subtitle menu, you can switch subtitles On or Off. Select On during mute to show subtitles only when the sound is muted with m.
3.5.2 Audio languages Digital TV channels can broadcast audio that transmits several languages for a program. You can set the TV to switch to your preferred language if it is available. 1/2 To set your preferred audio language, press h and select Setup > Channel settings and select Languages > Primary and Secondary audio. The TV will automatically switch to the languages you set, if the language is being broadcast. ...
3.5.2 Audio languages To check if an audio language is available, press o (Options) and select Audio language. You can select another audio language from the list. 2/2 Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired. Read More on … > Universal access.
3.6.1 Switch on With Universal access switched on, the TV is set for use for hearing and visually impaired people. 1/2 Switch on If you did not switch on Universal access at first use, you can still switch it on in Setup. To switch on Universal access, press h > Setup > TV settings > Preferences > Universal access. Select On and press OK. ...
3.6.1 Switch on With Universal access switched on in Setup, the Universal access option is added in the Options menu. With Universal menu in the Options menu, you can set specific settings for hearing and visually impaired people.
3.6.2 Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for hearing impaired people. With Hearing impaired switched on, the TV automatically switches to the adapted audio and subtitles, if available. 1/2 Switch on To switch on Hearing impaired, press o (Options), select Universal access and press OK. Select Hearing impaired, select On and press OK. ...
3.6.2 Hearing impaired To check whether a hearing impaired audio language is available, press o (Options), select Audio language and look for an audio language marked with a î. 2/2 If Universal access does not appear in the Options menu, switch on Universal access in the Setup. Read Help > More on … > Universal access > Switch on.
3.6.3 Visually impaired In some countries, some digital TV channels broadcast special audio adapted for visually impaired people. The adapted audio has extra commentary. 1/2 Switch on To switch on Visually impaired, press o (Options), select Universal access and press OK. Select Visually impaired and select On or, if available, select the speakers the adapted audio should be played from. If available, the TV will play the visually impaired audio. ...
3.6.3 Visually impaired Volume - Visually impaired If available, you can set the volume of the extra commentary. To check whether a visually impaired audio language is available, press o (Options), select Audio language and look for an audio language marked with a Ï. 2/2 If Universal access does not appear in the Options menu, switch on Universal access in the Setup. Read Help > More on … > Universal access > Switch on.
3.6.4 Key beep Key beep gives an audio feedback each time you press a key on the remote control. The volume of the beep is fixed. Switch on To switch on Key beep, press o (Options), select Universal access and press OK. Select Key beep and select On. If Universal access does not appear in the Options menu, switch on Universal access in the Setup. Read Help > More on … > Universal access > Switch on.
4.1.1 Smart settings You can adjust each Smart setting with the settings in Picture or Sound in Setup, TV settings. Adjust the brightness for a particular Smart picture or adjust the bass for a Smart sound. 1/2 To return to the original smart setting values, undoing the adjustments you made, first set up the TV in the smart setting you want to reset. Then press h > Setup > TV settings, select Reset, press OK and confirm.
4.1.1 Smart settings Read more about Smart picture and sound settings in Help > Use your TV > Watch TV > Smart picture and sound settings.
4.1.2 Picture 1/6 In the Picture menu, you can adjust all picture settings individually. • Contrast To open the Picture settings, press h > Setup > TV settings > Picture. • Brightness Sets the contrast level of the picture. Sets the brightness level of the picture. • Colour Sets the level of colour saturation. ...
4.1.2 Picture 2/6 • Hue • Tint If NTSC is broadcast, hue compensates the colour variations. Sets the colours to Normal, Warm (reddish) or Cool (bluish). Select Custom to set up your own personal settings in the Custom menu. • Sharpness Sets the level of sharpness of fine detail. • Noise reduction Filters out and reduces the image noise in the picture. • Custom tint Use the slider bar to set the colour temperature of the picture. ...
4.1.2 Picture • Perfect Pixel HD 3/6 Controls the advanced settings of the Perfect Pixel HD Engine. — 200 Hz Clear LCD / 100 Hz Clear LCD gives a superior motion sharpness, better black level, high contrast with a flicker-free, quiet image and a larger viewing angle. — Perfect Natural Motion removes motion judder and reproduces smooth movement, especially in movies. — Super resolution enables superior sharpness, especially on lines and contours in the picture. ...
4.1.2 Picture — Perfect contrast sets the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture. 4/6 — Dynamic backlight sets the level at which power consumption can be reduced by dimming the brightness intensity of the screen. Choose for the best power consumption or for the picture with the best brightness intensity. — MPEG artefact reduction smooths the digital transitions in the picture. ...
4.1.2 Picture — Colour enhancement makes the colours more vivid and improves the resolution of details in bright colours. • PC mode Sets the TV to the ideal pre-defined computer setting if a computer has been connected. 5/6 • Light sensor Adjusts the picture and Ambilight settings automatically to the lighting conditions of the room. • Picture format Read Help > Use your TV > Watch TV > Picture format. ...
4.1.2 Picture • Screen edges Slightly enlarge the picture to hide distorted edges. • Picture shift Move the picture up / down or left / right with the cursor keys.
4.1.3 Sound 1/2 In the Sound menu, you can adjust all sound settings individually. • Bass To open Sound settings, press h > Setup > TV settings > Sound. • Treble Sets the level of low tones in the sound. Sets the level of high tones in the sound. • Surround Sets the surround sound effect from internal speakers. ...
4.1.3 Sound 2/2 • Headphones volume • Balance Sets the volume for the headphone connection of the TV. Sets the balance of the left and right speakers to best fit your listening position. • Auto volume levelling Reduces sudden volume differences like at the beginning of adverts or when switching from one channel to another.
4.1.4 Ambilight Read the chapter Ambilight in Help > Use your TV > Ambilight.
4.1.5 Eco settings Eco settings bundle the TV settings that help the environment. While watching TV, press the Green key to open Eco settings. Active settings are marked with a ê. Press again to close. 1/2 Energy saving This Smart picture setting sets the picture, together with Ambilight, in the most ideal energy conscious setting. To switch on, select Energy saving in Eco settings and press OK. To switch off Energy saving, select another Smart picture in the s Adjust menu. ...
4.1.5 Eco settings 2/2 Mute screen Light sensor If you only listen to music, you can mute the TV screen to save energy. Select Mute screen and press OK. To switch the screen back on, press any key on the remote control. The built-in light sensor automatically adjusts the picture, together with Ambilight, to the lighting conditions of the room. To switch on, select Light sensor and press OK. To switch off, press OK again.
4.2.1 Reorder and rename You can reorder and rename channels in the Channel list. To reorder or rename a channel, read Help > Use your TV > Menus > e Browse.
4.2.2 Update channels On first use, the TV installed all channels in the Channel list. If the TV installed digital channels, the TV can automatically update the Channel list with new channels. You can also start an update of the Channel list yourself. The update is for digital channels only. 1/3 Automatic channel update Once a day, at 6 AM, the TV updates the channels and stores new channels. Empty channels are removed. For new or removed channels, a message is shown at TV start up.
4.2.2 Update channels To switch off the message at start up, press h > Setup > Channel settings and press OK. Select Channel installation > Channel update message and select Off. 2/3 To switch off the automatic channel update, press h > Setup > Channel settings and press OK. Select Channel installation > Automatic channel update and select Off. ...
4.2.2 Update channels Start an update To start an update the channel list for new channels yourself, press h > Setup > Search for channels and press OK. Select Update channels and press OK. Press Start. The update can take a few minutes. Follow the instructions on screen.
4.2.3 DVB-T or DVB-C If both DVB-T and DVB-C reception is available in your country and if this TV is ready to receive DVB-T and DVBC for your country, you will have selected one or the other with the channel installation on first use. 1/2 If you want to change the DVB setting to start a new channel installation, press h > Setup > Channel settings and press OK. Select Channel installation > Antenna or Cable DVB and press OK. Select the DVB setting you want. ...
4.2.3 DVB-T or DVB-C 2/2 DVB-C channel installation DVB-T + DVB-C For ease of use, all DVB-C settings are set to automatic. If your DVB-C provider gave you specific DVB-C values, like a symbol rate or a frequency, enter these values when the TV asks for them during installation. You can set up your TV for DVB-T and DVB-C. Install one system followed by the other. When both installations are complete, the Channel list will show both DVB-T and DVBC channels.
4.2.4 Reinstall channels On first use, the TV installed all channels in the Channel list. You can redo this full installation to reset your language, country and install all available TV channels. Full installation To reinstall the TV, press h > Setup > Search for channels and press OK. Select Reinstall channels and press OK. Press Start. The update can take a few minutes. Follow the instructions on screen. You can reorder and rename channels in the Channel list.
4.2.5 Digital reception quality If you receive digital TV broadcasting (DVB), you can check the quality and signal strength of a channel. If you use an antenna, you can reposition the antenna to try and improve the reception. 1/3 To check the reception quality of a digital channel, switch to the channel and press h > Setup > Channel settings and press OK. Select Channel installation > Digital : reception test and press OK. ...
4.2.5 Digital reception quality The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK. 2/3 To enter a specific digital frequency yourself, select the frequency, position the arrows on a number with x and w and change the number with u and v. To check the frequency, select Search and press OK. ...
4.2.5 Digital reception quality If you use DVB-C to receive channels, the options Symbol rate mode and Symbol rate are available. For Symbol rate mode, select Automatic unless your cable provider gave you a specific symbol rate value. To enter the symbol rate value, use the number keys.
4.2.6 Manual installation of analogue channels Analogue TV channels can be manually tuned in channel by channel. To install analogue channels manually, press h > Setup > Channel settings and press OK. Select Channel installation > Analogue : manual installation and press OK. ...
4.2.6 Manual installation of analogue channels 1 System 2 Find channel To set up the TV system, select System and press OK. Select your country or part of the world where you are now. To find a channel, select Find channel and press OK. Select Search and press OK. You can also enter a frequency yourself. If the reception is poor, press Search again. If you want to store the channel, select Done and press OK. ...
4.2.6 Manual installation of analogue channels 3 Fine tune 4 Store To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with u or v. If you want to store the found channel, select Done and press OK. You can store the channel on the current channel number or as a new channel number. Select Store current channel or Store as new channel. You can redo these steps until you find all available analogue TV channels.
4.2.7 Clock settings In some countries, digital broadcasts do not send UTC - Coordinated Universal Time information. The daylight saving change might be ignored and the TV might show an incorrect time. To correct the TV clock, press h > Setup > TV settings > Preferences > Clock and select Country dependent. Select Daylight saving and select the appropriate setting. To set the time and date manually, select Manual. Then select Time or Date.
4.3.1 Introduction As well as the DVB-T and DVB-C reception, this TV has a built-in satellite DVB-S receiver. With a satellite dish antenna connected, you can receive digital satellite channels. You do not need an external satellite receiver. ...
4.3.1 Introduction LNB An LNB -Low Noise Block-downconverter- captures the signals from a satellite and is mounted at the end of the pole on the dish antenna. The TV can receive signals from 4 different LNBs.
4.3.2 Install satellites With a properly set-up and connected satellite dish antenna, you can install satellite channels on the TV. You can install channels from 4 different satellites (4 LNBs). 1/6 1 Install To search for satellites and install satellite channels, press h > Setup > Search for satellite and press OK. If you have already installed satellites, select Reinstall channels and press OK. ...
4.3.2 Install satellites 2 Connection type Before you select Start, you must set up the connection type. The connection type will determine the number of LNBs (the number of different satellites) you can install. For ease of use, select the correct type for the number of satellites you want to install. 2/6 To set up the connection type, select Settings and press OK. Select Connection type and select One LNB if you have only one LNB, select DiSEqC Mini for 2 LNBs or select DiSEqC 1.
4.3.2 Install satellites 3 Search for satellites To start the installation, select Start and press OK. The TV searches for all available satellites. This can take several minutes. If no satellites are found, check the antenna connections and the position of the dish antenna. 3/6 The signal quality shown is not always representative of the signal quality of all channels on that satellite. To repeat the search for satellites, select Restart and press OK.
4.3.2 Install satellites 4/6 4 Install channels More settings To install all channels for the satellites you found, press Install. The installation can take several minutes per satellite. For most satellites, you do not need to change the LNB settings but, if you are searching for a specific satellite on C-band for instance, you need to set the LNB you use for this satellite to Single. Or, if you are an expert user, you might need a Custom setting for the LNBs you use.
4.3.2 Install satellites 5/6 Reset Signal reception test You might have lost track of the settings you set up. The automatic channel install might have missed a specific channel or channels from a transponder. You can add a transponder with Signal reception test. Read Help > Setup > Satellite channels > Signal reception test. To reset the satellite installation settings to factory settings, select Reset in Settings and press OK.
4.3.2 Install satellites Dish antenna connection Read more about the antenna connection for satellite in Help > Connections > First connections > Satellite antenna.
4.3.3 Add satellites If satellite channels are already installed, you can add an extra satellite to the installation. You can install channels from 4 different satellites - 4 LNBs. 1/4 1 Connection type Check the Connection type setting before you add a satellite. The setting One LNB receives only one LNB, the setting DiSEqC Mini receives only 2 LNBs and the setting DiSEqC 1.0 can receive 3 or 4 LNBs. ...
4.3.3 Add satellites To check the Connection type first, press h > Setup > Search for satellite and press OK. Select Reinstall channels and select Settings and press OK. Select Connection type and select the setting you need for the number of satellites you want to install. Select Done to close the settings. Press b to close Reinstall channels. 2/4 2 Add a satellite To add a satellite, press h > Setup > Search for satellite and press OK. Select Add satellite and press OK.
4.3.3 Add satellites If no satellites are found, check the antenna connections and the position of the dish antenna. Select Restart or Next LNB. If there are no free LNBs, you can remove a satellite first. Read Remove satellite in Help > Setup > Satellite channels > Remove channels. 3/4 3 Install channels If you are satisfied with the added satellite, you can install the channels. To install all channels, press Install. The installation can take several minutes.
4.3.3 Remove satellites You can remove a satellite from your satellite installation. 4/4 To remove a satellite, press h > Setup > Search for satellite. Select Remove satellite and press OK. Select the satellite you want to remove and press OK. To confirm, select Yes and press OK. The satellite and its channels are removed from the installation.
4.3.4 Update channels If satellite channels are already installed, you can update the channel list with possible new channels from all installed satellites. To update the satellite channels, press h > Setup > Search for satellite. Select Update channels and press OK. The TV scans the satellites for new channels and adds them to the list. Empty channels are removed from the list. The update can take several minutes per satellite. When the update has finished, the Channel list for satellite is updated.
4.3.5 Signal reception test With Signal reception test for satellites, you can check the signal strength of a satellite or you can add a new satellite channel. 1/2 To start Signal reception test, press h > Setup > Search for satellite. Select Signal reception test and press OK. 1 Select the LNB. 2 If you know the frequency of the transponder (which can hold several channels), select Frequency and enter it. 3 Select Search and press OK. ...
4.3.5 Signal reception test 4 If the TV finds a frequency and there is a store button shown, a new transponder has been found. 5 Press Store to add the new transponder with its channel or channels to the Channel list. To add another transponder, select Exit and repeat the steps.
4.3.6 Troubleshooting The TV cannot install the satellite I want • Check the orientation of the dish antenna. • Check the setting for the LNB that you use for this satellite. • Check the Connection type in the satellite installation settings. 1/2 • Reset all Satellite settings if you lost track of the settings you changed. Read Help > Setup > Satellite channels > Installation. ...
4.3.6 Troubleshooting 2/2 The reception of a satellite channel is poor Sometimes the reception is poor • Check the orientation of the dish antenna. • Check if the dish antenna is solidly mounted. Strong winds can move the dish. • Snow and rain can degrade reception. Read more about troubleshooting in Help > Troubleshooting.
4.4.1 Network benefits Browse PC Net TV If you connect the TV to a home network, you can play photos, music and videos from your computer or storage device. Once the network is installed on the TV, you can find and play the files from your PC on the TV screen. If you connect the TV to a home network, you can link up the TV to Net TV. Net TV offers Internet services and websites tailored to your TV. Play music and videos, consult infotainment, rent movies and much more.
4.4.2 What you need To connect the TV to a home network and Internet, you need a router in your home network. The router must be set to DHCP server on. Use a router with a high-speed connection to the Internet. ...
4.4.2 What you need If you use a wired connection to the router you need a network (Ethernet) cable. The TV uses a DLNA-certified protocol. You can use a computer with Microsoft Windows XP or Vista, Intel Mac OSX or Linux as the operating system. 2/3 Find your PC files To select your PC files on screen, you need recent media server software on your computer, like Windows Media Player 11 or similar. To find your files on the TV, some media server software must be set up to share the PC files with the TV.
4.4.2 What you need See the list of supported media server software, read Help > Specifications > Multimedia.
4.4.3 Wired installation 1/2 Connect the router to the TV and switch on your router before you start the network installation. The TV constantly searches for a network connection. The router must be set to DHCP server on. To start the wireless network installation, press h, select Setup > Connect to network and press OK. Follow the instructions on screen. If asked for, agree to the End User licence Agreement. ...
4.4.3 Wired installation Read more about how to connect in Help > Connections > Network > Wired.
4.4.4 Network settings To open the Network settings, press h > Setup > Network settings and press OK. You can view the network type, IP and MAC address, the signal strength, speed and encryption method etc. You can set DHCP and Auto IP, the IP configuration settings, DMR and the TV network name.
4.4.5 PC Media server settings Media servers need to be set for sharing their files and folders. Follow the instructions closely to set your specific server. In the Media Sharing window, check the Share my media box. Click OK. 1 2 Windows Media Player v11 on Windows Vista Set for network sharing In Windows Media Player select Library from the menu and select Media sharing.
Set Network discovery to On. Set File sharing to On. Go back to the Media Sharing window in Windows Media Player and check the Share my media box. Click OK. Set folders for sharing In Windows Media Player select Library from the menu and select Add to Library. When the TV is connected, by the router, to the PC and everything is switched On, the Media sharing window will show the TV as an Unkown Device. Select the device and click Allow.
With Advanced Options open, you can add specific folders to the list to share. Click Add. In the Add To Library window the newly added folder is shown. You can add more folders to share. Click the OK button to add the files to the library. 1 In the Add Folder window select a folder with music, photos or videos you want to share with other devices (your TV). Click OK. 1 Now everything is set to enjoy music, photos and videos on your TV.
Windows Media Player v11 on Windows XP Set for network sharing You can open the Settings window to change particular settings on sharing. When the device icon (the TV) is checked with a green tick, click OK. In Windows Media Player select Library from the menu and select Media sharing … Set folders for sharing In Windows Media Player select Library from the menu and select Add to Library. In the Media Sharing window, check the Share my media box.
With Advanced Options open, you can add specific folders to the list to share. Click Add. In the Add To Library window the newly added folder is shown. You can add more folders to share. Click the OK button to add the files to the library. 1 In the Add Folder window select a folder with music, photos or videos you want to share with other devices (your TV). Click OK. Now everything is set to enjoy music, photos and videos on your TV.
TVersity v.0.9.10.3 on Windows XP Click the Sharing tab. Set for network sharing 1 Click the Settings tab and click the Start Sharing button. 1 2 Set folders for sharing Click the green plus icon and select Add folder… 1 2 A pop-up window tells you that the media server service is started. Click OK. In the Add media pop-up window, click the Browse button.
Twonky Media v4.4.2 on Macintosh OS X Set for network sharing 1 In Twonky Media click Basic Setup > First steps. In this window you can change the server name that appears on your TV. In the Browse for Folder window select a folder with music, photos or videos you want to share. Click OK. 1 Now everything is set to enjoy music, photos and videos on your TV. 2 Click Basic Setup > Clients/Security. Check the box next to Enable sharing for new clients automatically.
Click Select to select the folder for sharing. Now click Save Changes. Set folders for sharing Click on Basic Setup > Sharing. Some ‘Content Locations’ might be set already automatically. To add a folder (a content location) to be shared on the network click the Browse button. Then click Rescan content directories. In some cases this might not make all files and folders available. Click Support > Troubleshooting and click Rebuild database to make sure everything works OK. This rebuilt might take a while.
4.5.1 EasyLink With the TV remote control you can operate devices that have EasyLink (HDMI-CEC) and are connected with an HDMI cable. Devices with EasyLink automatically show their activity in the Home menu. The TV comes with EasyLink switched on. 1/3 With an EasyLink device connected, EasyLink offers the following: • One touch play Insert a disc and press Play on the device. The TV switches on from standby and starts playing the disc. ...
4.5.1 EasyLink • System standby Press O on the remote control to switch all EasyLink devices to standby. 2/3 Make sure that all HDMI-CEC settings are properly set up on the device. EasyLink and EasyLink Remote control might not work with devices from other brands. ...
4.5.1 EasyLink HDMI-CEC on other brands The HDMI-CEC functionality has different names on different brands. Some examples of name are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink.
4.5.2 EasyLink Remote Control With EasyLink Remote Control, the TV remote control can operate the device you are watching on TV. The device must have EasyLink (HDMI-CEC) and have it switched on. The device must also be connected with an HDMI cable. 1/2 With an EasyLink device connected, select the device (the activity) and the TV remote control will now operate some or all of the functions of the device. To switch back to TV, select Watch TV in the Home h menu and press OK. ...
4.5.2 EasyLink Remote Control Switch off EasyLink Remote Control To switch off EasyLink Remote Control, press Home h > Setup > TV settings and select EasyLink > EasyLink Remote Control and select Off. 2/2 Read more about EasyLink in Help > Setup > Devices > EasyLink HDMI-CEC.
4.5.3 Add a new device 1/3 Devices connected with EasyLink (HDMI-CEC) automatically show their activity in the Home menu. A single device can add several activities. The device must be connected with an HDMI cable. If your connected device does not have EasyLink (HDMICEC) or is not connected with an HDMI cable, you need to manually add your device with Add your devices in the Home menu. If your connected device does not appear in the Home menu, on the device EasyLink may be switched off. ...
4.5.3 Add a new device 2/3 Add your devices Rename a device In the Home menu, select Add your devices and press OK. Follow the instructions on screen. To rename an added device or activity, press o (Options) and select Rename. Use the keypad on the remote control as you do for SMS/text messaging to enter the new name. The TV asks you to select the device and the connection to which the device is connected. The device or its activities are now added to the Home menu. ...
4.5.3 Add a new device Delete a device To delete a device or activity from the Home menu, select the item and press o (Options) and then select Remove this device. 3/3 If the device or activity, keeps appearing in the Home menu after you deleted it, switch off the EasyLink setting on the device to prevent this automatic pop-up appearing again.
4.5.4 EasyLink sound With an audio system connected, EasyLink also offers the following: • System audio control If you connect an audio system, you can listen to the audio from the TV through the audio system. The TV speakers are muted automatically. 1/3 • Surround mode With a recent Philips device selected in the Home menu, you can change the surround sound setting of the device on the TV. To change this setting, press s (Adjust), select Surround mode and press OK.
4.5.4 EasyLink sound 2/3 • Smart sound • Screen off With a recent Philips device selected in the Home menu, you can change the Smart sound setting of the device on the TV. To change this setting, press s (Adjust), select Smart sound and press OK. Select a sound mode from the list. If a recent Philips device that is selected in the Home menu is only sending audio to the TV, the device may suggest switching off the TV screen.
4.5.4 EasyLink sound • TV speakers The TV speakers mute automatically when an EasyLink audio device is selected in the Home menu. You can also set the TV speakers to always or never play sound or set the TV to always start up the audio device and play sound from the device. 3/3 To set the TV speakers, press h > Setup > TV settings > EasyLink > TV speakers. Select EasyLink Autostart only if you always want to play sound from the audio device.
4.5.5 Audio to Video sync With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronized. A mismatch is visible in scenes with people talking. When they finish sentences before their lips stop moving. 1/3 HDMI-ARC Latest Home Theatre Systems with built-in disc players adjust the audio to video sync automatically when they are connected to the HDMI-ARC connections (HDMI - Audio Return Channel). ...
4.5.5 Audio to Video sync Audio sync delay Other Home Theatre Systems might need an audio sync delay to synchronize. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. 2/3 With a delay value set up on the HTS, you need to switch off Audio Out delay on the TV if the HTS has this delay set up for all its output connections.
4.5.5 Audio to Video sync If you cannot set up a delay on the HTS or its maximum setting is insufficient, you can switch off the Perfect Natural Motion picture processing of the TV. To switch off Perfect Natural Motion, press h and select TV settings > Picture > Perfect Natural Motion. Select Off and press OK.
4.5.6 Auto subtitle shift If you play a DVD or Blu-ray Disc from a recent Philips player, the TV can move the subtitles upwards. Subtitles will then be visible whatever Picture format you select. The TV comes with Auto subtitle shift switched on. To switch off Auto subtitle shift, press h > Setup > TV settings > EasyLink > Auto subtitle shift. Select Off.
4.5.7 Pixel Plus link Some other devices, DVD or Blu-ray Disc players, might have their own picture quality processing. To avoid bad picture quality caused by interference with the TV processing, the picture processing of these devices should be disabled. The TV comes with Pixel Plus link switched on and disables the picture quality processing of a connected device. To switch off Pixel Plus link, press h > Setup > TV settings > EasyLink > Pixel Plus link. Select Off.
4.6.1 Current software info To view the current TV software version, press h > Setup > Software settings and press OK. Select Current software info and read Version: . . ..
4.6.2 Update from Internet If the TV is connected to the Internet, you may receive a message from Philips to update the TV software. You need a high-speed Internet connection. 1/2 If you receive this message, we recommend you carry out the update. Select Update. Follow the instructions on screen. ...
4.6.2 Update from Internet You can also look for new updates yourself. To look for an update, press h > Setup > Update software and press OK. Follow the instructions on screen. 2/2 When the update is complete, the TV switches itself off and back on again automatically. Wait for the TV to switch itself back on. Do not use the Power switch O on the TV.
4.6.3 Update with USB It might be necessary to update the TV software. You need a PC with an high-speed Internet connection and a USB memory device to upload the software on the TV. Use an USB memory device with 256Mb free space. Make sure that write protection is switched off. 1/5 1 Start 2 Identify 3 Download 4 Update TV ...
4.6.3 Update with USB 2/5 1 Start the update on TV 2 Identify the TV To start the software update, press h > Setup > Update now. Insert the USB memory on the side of the TV, select Start and press OK. An identification file is written on the USB memory. ...
4.6.3 Update with USB 3/5 3 Download the TV software 4 Update the TV software Insert the USB memory in your PC. On the USB memory, locate the file update.htm and double click it. Click on Send ID. If new software is available, download the .zip file. After the download, unzip the file and copy the file autorun.upg onto the USB memory. Do not place this file in a folder. Insert the USB memory in the TV again. The update starts automatically.
4.6.3 Update with USB If a power cut occurs during the update, never remove the USB memory from the TV. When the power returns, the update will continue. At the end of the update, the message Operation succesful appears on screen. Remove the USB memory and press O on the remote control. 4/5 Do not . . . • press O twice • use the O switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. The TV software has been updated. You can use the TV again. ...
4.6.3 Update with USB To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory.
5.1.1 Power cable Insert the power cable in the power socket of the TV. When disconnecting the power cable, always pull the plug, never the cable. ...
5.1.1 Power cable Although this TV has a very low standby power consumption, switch off the TV with the power switch to save energy if you do not use the TV for a long period of time. Read more about the power switch in Help > To begin > Keys on the TV > Power switch. 2/2 Make sure the power cable is securely inserted in the TV. Make sure that the power plug in the wall socket is accessible at all times.
5.1.2 Antenna cable Locate the antenna connection at the back of the TV. Insert the antenna cable securely in the Antenna a socket.
5.1.3 Satellite antenna cable Locate the F-type Satellite antenna connection at the side of the TV. Attach the satellite antenna cable to this connection.
5.2.1 Cable quality Before you connect devices to the TV, check which connectors are available on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound. Read the other chapters of About cables. The connections diagrams shown in Help > Connections > Connect devices are recommendations. Other solutions are possible.
5.2.2 HDMI An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) TV signals. An HDMI cable transfers picture and sound signals in only one direction. Do not use an HDMI cable longer than 5m. ...
5.2.2 HDMI 2/4 EasyLink HDMI-CEC HDMI-ARC If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. Read more about EasyLink in Help > Setup > Devices > EasyLink HDMI-CEC. If you have a Home Theatre System with an HDMI-ARC (Audio Return Channel) connection, you can connect this device with the TV with only a HDMI cable. Use the HDMI1 ARC connection. ...
5.2.2 HDMI You can skip the audio cable that is added normally (the cable that connects the TV Digital audio Out to the device Digital audio In). The return audio connection in this HDMI-ARC connector is built-in. You do not need a special HDMI cable. 3/4 You can leave the ARC channel switched on if you use the additional digital audio cable. Still you can switch off HDMI-ARC. To switch off the ARC in the HDMI 1 connection, press h > Setup > TV settings > EasyLink > HDMI 1 ARC, select Off and press OK. .
5.2.2 HDMI 4/4 DVI to HDMI Copy protection Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable to Audio In VGA/HDMI for sound, on the back of the TV. A DVI and HDMI cable support HDCP (High-bandwidth Digital Contents Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Managament).
5.2.3 YPbPr — Component video Use the Component Video YPbPr connection together with an Audio Left and Right connection for sound. Match the YPbPr connector colours with the cable plugs when you connect. YPbPr can handle High Definition (HD) TV signals.
5.2.4 Scart A scart cable combines video and audio signals. Scart connectors can handle RGB video signals but cannot handle High Definition (HD) TV signals.
5.2.5 S-Video If you have a device with only a S-Video connection, you need to use a S-Video to Scart adapter (not supplied). You can add the Audio L/R connections. Connect the adapter to a Scart connection of the TV.
5.2.6 Video If you have a device with only a Video (CVBS) connection, you need to use a Video to Scart adapter (not supplied). You can add the Audio L/R connections. Connect the adapter to a Scart connection of the TV.
5.2.7 VGA Use a VGA cable (DE15 connector) to connect a computer to the TV. With this connection you can use the TV as a computer monitor. You can add an Audio L/R cable for sound. To connect a computer with the VGA connection, read Help > Connections > Connect more devices > TV as PC monitor.
5.3.1 SoundBar Use an HDMI cable to connect the device to the TV.
5.3.1 SoundBar If you use the HDMI-ARC connections on both TV and device, no other cable is needed. If not, read on.
5.3.1 SoundBar If you do not use the HDMI-ARC connection, add a digital audio cable (cinch coaxial).
5.3.2 Blu-ray Disc / DVD player Use an HDMI cable to connect the device to the TV.
5.3.3 Home Theatre System with disc player Use an HDMI cable to connect the device to the TV.
5.3.3 Home Theatre System with disc player If you use the HDMI-ARC connections on both TV and device, no other cable is needed. If not, read on.
5.3.3 Home Theatre System with disc player If you do not use the HDMI-ARC connection, add a digital audio cable (cinch coaxial).
5.3.3 DVD Home Theatre System Audio to Video synchronisation (sync) If the sound does not match with the video on screen, you can set a delay on most DVD Home Theatre Systems to match the sound and video. Read more about Audio to Video sync in Help > Setup > Devices > Audio to Video sync. 4/4 Do not connect the audio signal from a DVD player or other device directly to the Home Theatre System. Always route the sound through the TV first.
5.3.4 Recorder Use 2 antenna cables to connect the antenna to the device and the TV.
5.3.4 Recorder Add an HDMI cable to connect the device to the TV.
5.3.5 Digital receiver or Satellite receiver Use 2 antenna cables to connect the antenna to the device and the TV.
5.3.5 Digital receiver or Satellite receiver Add an HDMI cable to connect the device to the TV.
5.3.6 Digital receiver and Disc Recorder First, use 3 antenna cables to connect the devices to the TV.
5.3.6 Digital receiver and Disc Recorder Then use an HDMI cable to connect the digital receiver to the TV.
5.3.6 Digital receiver and Disc Recorder Finally, use an HDMI cable to connect the Disc Recorder to the TV.
5.3.7 Digital receiver, Disc Recorder and Home Theatre System First, use 3 antenna cables to connect the devices to the TV.
5.3.7 Digital receiver, Disc Recorder and Home Theatre System Then use an HDMI cable to connect the digital receiver to the TV.
5.3.7 Digital receiver, Disc Recorder and Home Theatre System Then use an HDMI cable to connect the Disc Recorder to the TV.
5.3.7 Digital receiver, Disc Recorder and Home Theatre System Then use an HDMI cable to connect the Home Theatre System to the TV.
5.3.7 Digital receiver, Disc Recorder and Home Theatre System If you do not use the HDMI-ARC connection on the TV and the device, add a digital audio cable (cinch coaxial).
5.3.8 Digital HD receiver First, use 2 antenna cables to connect the device to the TV.
5.3.8 Digital HD receiver Use an HDMI cable to connect the device to the TV.
5.4.1 Game console Connect a game console to the side or back of the TV. You can use an HDMI, YPbPr or Scart connection. If your game console only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to Scart adapter to connect to the Scart connection. 1/3 Picture delay To prevent picture delay while gaming, close Help and press s (Adjust) and select Smart picture > Game and press OK. After gaming, do not forget to select the Smart picture you normally use for watching TV. ...
5.4.1 Game console Use an HDMI cable to connect the device to the side of the TV.
5.4.1 Game console Or use a Scart adapter to connect the device to the TV.
5.4.2 HD Game console Use an HDMI cable or YPbPr and Audio L/R cables to connect a High Definition game console to the TV. To connect a HD Game console, read Help > Connections > Connect more devices > Game.
5.4.3 Photo camera To view pictures stored on your digital photo camera, you can connect the camera directly to the TV. Use the USB connection on the side of the TV to connect. Switch on the camera after you made the connection. ...
5.4.3 Photo camera If the list with the content of the camera does not appear automatically, your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.
5.4.4 Camcorder Connect a camcorder to the side or back of the TV. You can use an HDMI, YPbPr or Scart connection. If your camcorder only has S-Video (Y/C) or Video (CVBS) and Audio L/R output, use a S-Video or Video Audio L/R to Scart adapter to connect to the Scart connection. 1/3 See the following pages to connect your camcorder. ...
5.4.4 Camcorder Use an HDMI cable to connect the camcorder to the side of the TV.
5.4.4 Camcorder Or use a Scart adapter to connect the device to the TV.
5.4.5 TV as PC monitor You can connect the TV to your computer as a PC monitor. Before connecting the PC, set the PC monitor refresh rate to 60 Hz. 1/4 See the following pages for how to connect your computer. ...
5.4.5 TV as PC monitor Use a VGA cable to connect the PC to the VGA connector and an audio L/R cable to connect the VGA Audio L/R to the back of the TV.
5.4.5 TV as PC monitor Use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable to connect the Audio L/R to the back of the TV.
5.4.5 TV as PC monitor Ideal TV setting Set the TV Picture format to Unscaled for the sharpest picture quality. While watching TV, press o, select Picture format and select Unscaled. 4/4 For a list of supported resolutions see Help > Specifications > Display resolutions.
5.4.6 Decoder Use a scart cable to connect a decoder that decodes analogue antenna channels. Use the EXT1 or EXT2 connectors on the back of the TV. You have to assign the TV channel as a channel to be decoded. Then assign the connection where the decoder is connected. To assign this TV channel, press h > Setup > Channel settings > Decoder. Select Channel to set up the channel that you want to decode. Select Status to set the connection you use for the decoder.
5.5.1 Wired network connection To set up the wired network connection, read Help > Setup > Network Connect the router to the TV with a network cable. Use a standard FTP or STP ethernet cable.
5.5.2 Wi-Fi Ready This TV is Wi-Fi Ready. With the Wireless USB adapter PTA01 accessory (not supplied) you can connect the TV to your network wirelessly. Next to the wireless connection, the free Wi-Fi MediaConnect software can bring up project- your PC screen on the TV. You can project video, music, presentations, etc. playing on your laptop or desktop PC. 1/5 What you need To use Wi-Fi MediaConnect, you need to connect the TV to your home network. You need a wireless router.
5.5.2 Wi-Fi MediaConnect Install Wi-Fi MediaConnect 1 Insert the Wi-Fi MediaConnect CD-ROM in your PC. The CD-ROM disc that came with the TV. 2 Your PC starts your Internet browser and opens the WiFi MediaConnect download page - www.philips.com/ wifimediaconnect. On the website, you can check the necessary PC system requirements. 2/5 3 Enter the code printed on the CD-ROM envelope. 4 Click the 'Download now' button to download the free Wi-Fi MediaConnect software.
5.5.2 Wi-Fi MediaConnect TV network name If you have more then one TV in your home network, you can rename this TV. To rename this TV in the network, press h > Setup > Network settings and select TV network name. 3/5 To enter the name, press OK to open the on-screen keyboard or use the remote control keypad. ...
5.5.2 Wi-Fi MediaConnect Wi-Fi MediaConnect Help To read the Wi-Fi MediaConnect Help, right click the program icon in the notification tray of the PC and select Help. Specifics You can project high definition (HD) or standard definition (SD) video, depending on the processing power of your PC. 4/5 The content protection on most DVD or Blu-ray Disc movies might restrict watching the movie on TV when the disc is playing on a PC. The TV shows PC media files with a small delay.
5.5.2 Wi-Fi MediaConnect 5/5 PC requirements Windows XP, Vista, Windows 7 (PC only) Recommended PC requirements Minimum PC requirements • Intel Pentium Core 2 Duo 2.1GHz • Intel Pentium Core 2 Duo 1.8GHz • 1GB RAM • 512MB RAM • 200MB free hard disk space • 200MB free hard disk space • Wi-Fi 802.11n • Wi-Fi 802.
5.6.1 SD card preparation To download rented videos from Net TV, you need to insert an SD memory card in the TV SD card slot. Once formatted, leave the card permanently in the slot. SD memory size We recommend an SDHC (High Capacity) Class 2 card with a minimum of 4GB memory. For HD movies, a minumum of 8GB memory. Read more about renting videos in Help > Use your TV > Net TV > Video stores.
5.6.2 Insert an SD card Make sure to unlock the SD memory card before you insert it. To format the SD card, switch on the TV and insert the SD card in the SD card slot. The TV will automatically start formatting. Leave the SD card permanently in the slot.
5.7.1 Conditional Access Module - CAM Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM). Digital TV service operators provide the CAM when you subscribe to their services. Contact a digital TV service operator for more information and to see terms & conditions. Insert a CAM Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and the TV. ...
5.7.1 Conditional Access Module - CAM Look for the common interface slot on the back of the TV. Gently insert the CAM as far as it will go and leave it in the slot permanently. It can take a few minutes before the CAM is activated. Removing the CAM will deactivate the service on TV.
5.7.1 Conditional Access Module - CAM Watching a CAM service CAM settings If a CAM is inserted and subscription fees have been paid, the TV shows the programme from the digital TV service provider. The applications, their function, the content and the onscreen messages all come from the CAM service. To set passwords or PIN codes for the CAM service, press h > Setup > Channel settings > Common Interface. Select the CAM provider and press OK.
5.7.2 Common Interface Plus CI+ This TV can handle the CI+ conditional access. CI+ allows service providers to offer premium HD digital programmes like movies and sports with a high level of copy protection. To insert a CI+ CAM, read the chapter CAM - Conditional Access Module.
5.8.1 3D This TV is prepared for future 3D TV accessories.
6.1 Contact information If the advice and suggestions in Troubleshooting do not help resolve the problem, try switching the TV off and back on again. Warning If your TV breaks down, NEVER try to repair the TV yourself. 1/2 Consumer Care If the TV problem is not solved you can call the Philips Consumer Care hotline in your country. Look up the TV model and serial number before you call. Find the telephone number on the documentation that came with the TV. Or consult our website www.philips.com/support ...
6.1 Contact information TV model number and serial number Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
6.2 TV and remote control 1/3 The TV does not switch on The TV does not switch on from standby • Switch the TV off and on again with the switch on the bottom of the TV. • Check that the batteries of the remote control are not empty or weak. Check their + / - orientation. • Check the power cable connection. • Try using the keys on the TV to switch on. • Try using the keys on the TV to switch on. ...
6.2 TV and remote control The TV does not respond to the remote control • Check that the batteries of the remote control are not empty or weak. Check their + / - orientation. • Clean the remote control and TV sensor lens. 2/3 • During start-up, which can take up to two minutes with connected devices, the TV and some external devices do not immediately respond to commands from the remote control. The device is functioning normally and is not broken. ...
6.2 TV and remote control 3/3 The TV switches off and the red light blinks You forgot your code to unlock Child lock? • Switch the TV off and on again with the switch at the bottom of the TV. Check if there is enough space for ventilation. Wait until the TV has cooled down. Read Help > More on … > Locks and timers > Child lock. If the TV does not restart from standby and the blinking occurs again, call Consumer Care.
6.3 TV channels Some TV channels are gone • Check if the correct list is selected in the Channel list. With the Channel list on screen, press o (Options) and select the list you need with Select list. 1/2 • A channel could be hidden in the Channel list. Read more about Channel list in Help > Use your TV > Menus > Browse. ...
6.3 TV channels No digital channel found during installation • Check if the TV supports DVB-T or DVB-C in your country. Check the 'Digital TV Country Compatibility' sticker on the back of the TV.
6.4 Picture and sound 1/7 No picture The picture is poor • Check if the antenna is connected properly. • Bad weather can influence the picture quality. • Check if the correct device is selected and connected properly. • Check if the antenna is connected properly. • Check the contrast or brightness setting in h > Setup > TV settings > Contrast or Brightness. • Non-earthed audio devices, neon lights, high buildings or mountains can influence the picture quality.
6.4 Picture and sound • Check that the correct TV system is chosen in the Manual installation menu. • If only a certain channel is poor, try to fine tune this channel with the Fine tune menu. Read Help > Setup > Channels > Manual installation - Analogue. 2/7 The picture has poor colour • Check the colour settings in h > Setup > TV settings. Or press s (Adjust) to select a Smart picture setting. ...
6.4 Picture and sound Picture delay when a game console is connected • To prevent picture delay, press s (Adjust), select Smart picture > Game. 3/7 The TV does not remember my settings when I switch it back on • Check whether the TV is set to the Home location. Press s > Setup > TV settings > Preferences > Location. ...
6.4 Picture and sound 4/7 The picture does not fit the screen The picture position on screen is not correct • Press s (Adjust), Picture format and select Auto fill. • To correct a shifted picture, press s (Adjust) and select Picture shift. Use the navigation keys to adjust the picture position. Press OK to stop Picture shift. ...
6.4 Picture and sound • If distorted screen edges are visible, press h > Setup > TV settings > Picture > Screen edges and use the slider bar to enlarge the picture slightly. 5/7 There is a picture but no sound • Check the volume is not set to 0. • Check the sound has not been muted with m. • Check that all cables are connected properly. • If no sound signal is detected, the TV automatically switches off sound. This is proper operation and is not a malfunction. ...
6.4 Picture and sound 6/7 The sound is poor The sound comes from one speaker only • Try any Smart sound setting, press s (Adjust), Smart sound. • Check the Balance setting. Press h > Setup > TV settings > Sound > Balance. Use the slider bar to set the balance. • Check that the sound is set to Stereo. ...
6.4 Picture and sound Sound delay • If there is an audio to video sync mismatch when sound comes from a Home Theatre System, an audio sync delay needs to be set up. Read more about Audio to Video sync in Help > Setup > Devices > Audio to Video sync.
6.5 Devices HDMI connections 1/3 • The HDMI-HDCP procedure might take a few seconds before the picture from a device appears. • If sound interruptions occur persistently, see the user manual of the device to check the output settings. If that does not help, connect an additional audio cable. • If the TV does not recognise the device and there is no picture, try switching from one device to another and back again to restart the HDCP procedure.
6.5 Devices EasyLink HDMI-CEC • Check if the connected device supports the HDMI-CEC standard and is properly set up. Read the user manual that comes with the device. • Check if the HDMI cable is properly connected. 2/3 • Check if EasyLink on the TV and device is switched on. • Make sure that the System audio control in your HDMICEC audio devices is properly set up. Read the user manual that comes with your audio device. ...
6.5 Devices PC display • The refresh rate of a PC connected to the TV with VGA or DVI to HDMI adapter should set to 60Hz. • Check that the correct resolution mode is selected on your PC. See the list in Help > Specifications > Display resolutions.
6.6 Multimedia The files on my USB device are not shown • Set your device (camera) to ‘Mass Storage Class’ compliant. • The USB device may need specific driver software. Unfortunately, this software cannot be downloaded to your TV. 1/2 • Not all audio and picture files are supported. See the list in Help > Specifications > Multimedia. ...
6.6 Multimedia 2/2 Files from a USB device do not play back smoothly The files on my PC are not shown • The transfer performance of the USB device limits the transfer rate. • To look for files on your home network with Browse PC, your PC media server software should be set up to share the files with the TV. See the list of compatible Media server software in Help > Specifications > Multimedia.
6.7 Network Net TV does not work • If the connection to the router is OK, check the router connection to the Internet. • You need a high-speed Internet connection for your router.
7.1.1 Software version To view the current TV software version, press h > Setup > Software settings and press OK. Select Current software info and read Version:.
7.1.2 Open source software This television contains open source software. Philips hereby offers to deliver or make available, upon request, for a charge no more than the cost of physically performing source distribution, a complete machine readable copy of the corresponding source code on a medium customarily used for software interchange. 1/2 This offer is valid for a period of 3 years after the date of purchase of this product. To obtain the source code, write to . . .
7.1.2 Open source software Read the Open Source Licences in Help > To begin > Open Source Licences.
7.2.1 European Ecolabel Philips continuously focuses on lowering the environmental impact of its innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-efficient use, end-of-life instructions and product recycling. ...
7.2.1 European Ecolabel Thanks to our environmental effort, this TV has been awarded the European Ecolabel —the flower(www.ecolabel.eu). You can find detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.
7.2.2 Environmental 1/2 Light sensor Low standby power To save energy, the built-in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. The class-leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level, without losing out on the constant Standby functionality. Energy saving The Energy saving Smart picture setting, combines several TV settings that result in saving energy. ...
7.2.2 Environmental efforts Power management The advanced power management of this TV ensures the most efficient use of its energy. You can check how your personal TV settings, the level of brightness in current onscreen pictures, and the surrounding light conditions determine the relative power consumption. 2/2 To check the relative power consumption, press h > Setup and press W. Select Watch demos > Active control and press OK. Select a Smart setting to check the corresponding values.
7.2.3 End of use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. ...
7.2.3 End of use When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. ...
7.2.3 End of use Please inform yourself about the local separate collection system for electrical and electronic products. 3/5 Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. ...
7.2.3 End of use Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. ...
7.2.3 End of use Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
7.3.1 Power Product specifications are subject to change without notice. For more specification details of this product see www.philips.com/support. Power • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C • Standby power consumtion : < 0.15W • Power saving features : Light sensor, Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu.
7.3.
7.3.2 Reception • Preset for satellites : Astra (19.2°E), Astra (23.5 °E), Astra (28.2 °E), Hotbird (13.0 °E), TürkSat (42.
7.4 Display and sound Display / Picture • Diagonal size : - 32PFL8605 : 81cm / 32" - 37PFL8605 : 94cm / 37" - 40PFL8605 : 102cm / 40" - 46PFL8605 : 116cm / 46" - 52PFL8605 : 132cm / 52" • Picture enhancement : - Perfect Pixel HD Engine - 32PFL8605 : 100Hz Clear LCD - 37, 40, 46, 52PFL8605 : 200Hz Clear LCD 1/2 • Display type : LCD Full HD, edge LED backlight • Panel resolution : 1920 x 1080p • Color processing : 2250 trillion colors 17bit RGB • Brightness : 500 cd/m2 • Dynamic contrast : 500.
7.4 Display and sound Sound • Output power (RMS) : 2 x 10W • Dolby Digital Plus, Dolby Pulse - Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
7.
7.6 Multimedia 1/3 Connections Playback formats • USB • MP3, AAC • Ethernet LAN RJ-45 • WMA v2 up to v9.2 Supported USB / memory device formats • FAT 16, FAT 32, NTFS • Still pictures : JPEG • MPEG 1, MPEG 2, MPEG 4 • H.264 (MPEG-4 AVC) • WMV9 • MPEG program and transport stream • AVI, MP4, MKV, ASF ...
7.6 Multimedia Supported media server software • Windows Media Player 11 (for Microsoft Windows XP, Vista or Windows 7) • Google (for Windows XP) • Twonky Media — PacketVideo 4.4.9 (for PC and Intel MacOX)(5.0.
7.6 Multimedia • TVersity 1.
7.7 Connectivity TV Rear 1/2 • EXT1 Scart : Audio L/R, CVBS in, RGB • Audio Out L/R — display synchronised (coaxial-cinch-S/ PDIF) • EXT2 Scart : Audio L/R, CVBS in, RGB • Headphones (stereo mini-jack 3.5mm) • EXT3 : Y Pb Pr, Audio L/R • Network — (RJ45) • VGA (D-sub 15), Audio In (stereo mini-jack 3.5mm) • 3D Out (only for 40PFL8605 and 46PFL8605) • HDMI 1 - ARC in (HDMI v1.4) • HDMI 2 in (HDMI v1.3) • HDMI 3 in (HDMI v1.3) • Audio In (DVI to HDMI)(stereo mini-jack 3.5mm) ...
7.7 Connectivity TV Side • HDMI Side in (HDMI v1.
7.8 Dimensions and weights 1/2 32PFL8605 37PFL8605 40PFL8605 Width 779 mm Width 900 mm Width 965 mm Height 496 mm Height 565 mm Height 600 mm Depth 44 mm Depth 44 mm Depth 50 mm Weight ±13 kg Weight ±16 kg Weight ±18 kg . . . with TV stand . . . with TV stand . . . with TV stand Height 532 mm Height 601 mm Height 636 mm Depth 228 mm Depth 248 mm Depth 248 mm Weight ±16 kg Weight ±19 kg Weight ±20 kg UMv 3104 327 0033.
7.8 Dimensions and weights 46PFL8605 Width 1102 mm Height 675 mm Depth 51 mm Weight ±25 kg . . .
Safety Risk of electric shock or fire! • Never expose the TV or remote control to rain, water or excessive heat. • Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. • Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight.
Europe — EC Declaration of Conformity to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products. English Mains fuse (UK only) This TV is fitted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). 1.
Info for UK only. Information about how to re-tune your TV during the digital TV switchover. Digital UK, the body leading the digital TV switchover, will advise you when you need to re-tune during the switchover. If you do not re-tune your channels when advised to do so by Digital UK, you may lose some or all of your channels until you do re-tune. You should re-tune your TV every few months to check for any new channels.
Diagramma elettronico / Electronic diagram 8000 9000 Platform 2K10: TV550 (Basic) Platform 2K10: TV550 (200Hz) memory memory Video Chip Video Chip memory DVB-S CAM Tuner Tuner CA DVB-S Matrix LCD HDNM chip DVB-T/C Tuner Matrix LCD DVB-T/C Tuner CAM Ambilight Ambilight Flash Ethernet Flash Ethernet Flash Wifi HDMI HDMI Audio Amp. memory Wifi 32 HDNM chip Audio Amp.
www.philips.com/tv Non-contractual images. / Images non contractuelles. / Außervertragliche Bilder. All registered and unregistered trademarks are property of their respective owners. Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners 2010 © Koninklijke Philips Electronics N.V. All rights reserved www.philips.
