User manual
Table Of Contents
16
2.4 Multiclient Integrated KVM
1
What is it?
With the Multiclient Integrated Keyboard Video Mouse (KVM) switch feature, it is
possible to control two separate PCs with a one monitor/keyboard/mouse setup.
2
How to Enable Multiclient Integrated KVM
With the built-in Multiclient Integrated KVM feature, it’s easy to switch between each
connected device via the On-Screen Display (OSD) menu setting. For the use of USB-C,
HDMI and/or DP as input, use the USB-C cable in the direction of USB Upstream.
Then, connect the upstream cables from your PC to the USB-C 1 and USB-C 2 ports
located on the monitor. This process for each PC can be done simultaneously. Please
refer to the table and graphic below for more information.
This table explains each source to its corresponding ports on the monitor.
Source USB Upstream Source USB Upstream
HDMI or DP USB C2 HDMI or DP USB C1
USBC1 USB C1 USBC2 USB C2
A Step-by-Step procedure:
1. Connect each cord from the corresponding ports on the monitor, as mentioned in
the table above, downstream to each PC.
1
1
2
OR
PC1
OR
PC2
OR
USB A-C Cable
USB C-C Cable
2. Enter the On-Screen Display (OSD) menu. Go to the KVM tab and select “Auto”,
“USB C1”, or “USB C2” to switch the monitor view from one device to another. To
switch to another monitor view, simply repeat this step.