User manual
Table Of Contents
26
4. Daisy-chain function
DisplayPort Multi-Stream feature
enables multiple monitor connections.
This Philips display is equipped with
DisplayPort interface and DisplayPort
over USBC1/USBC2 which enables daisy-
chaining to multiple displays.
Now you can daisy chain and use
multiple monitors via a single cable from
one display to the next.
To daisy-chain monitors, rst to check
below:
Make sure the GPU on your PC support
DisplayPort MST (Multi-stream
transport).
Note
• The maximum number of
connectible monitors may vary
depending on GPU performance.
• Please check with your graphic card
vendor and always update your
graphic card driver.
DisplayPort multi-streaming over
DisplayPort
PC
Display Resolution Maximum number of external
monitors that can be supported
Extend mode (DisplayPort)
3440 x 1440 @ 60Hz 2
DisplayPort multi-streaming over
USBC1/USBC2
PC
OR
Display
Resolution
Input
Link
Rate
*1
USB
Settings
*2
Maximum number
of external
monitors that can
be supported
Display
Resolution
Output
3440 x 1440
@30Hz
HBR2 USB 3.2 1 3440 x 1440
@30Hz
3440 x 1440
@60Hz
HBR2 USB 2.0 1 3440 x 1440
@60Hz
HBR3 USB 3.2 1 3440 x 1440
@30Hz
USB 2.0 2 3440 x 1440
@60Hz
Note
1. To check link rate: press button,
select Setup > information. The
screen will show HBR3, otherwise,
the link rate is HBR2.
2. We recommend to set USB Setting to
USB 3.2, press button, select USB
Settings > USB, then select USB 3.2
which supports the LAN speed to 1G.
To select one of DP Out Multi-stream
modes:
Press button, select Setup > DP Out
Multi-stream > Extend.
Clone
Extend
Setup
Power LED
Resolution Noti�cation
DP Out Multi-Stream
Information
Reset
Note
The secondary monitor in the chain must
support DisplayPort multi-streaming,
and the maximum resolution support is
3440 x 1440@60Hz.