42BDL5055P V1.01 www.philips.
42BDL5055P Safety Instructions Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources.
42BDL5055P Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.
2BDL5055P Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
42BDL5055P Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. (B) Important: (A) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
42BDL5055P China RoHS 电子电气产品有害物质限制使用标识要求 (中国RoHS法规标识要求) 产品中有害物质的名称及含量。 有害物质 零部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 塑料外框 O O O O O O 后壳 O O O O O O CCFL X X O O O O LED X O O O O O 电路板组件* X O O O O O 底座 O O O O O O 电源线 X O O O O O 其他线材 X O O O O O 遥控器 X O O O O O LCD panel *：电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路、连接器等。 本表格依据SJ/T 11364的规定编制。 O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 标准规定的限量要求以下.
42BDL5055P 《废弃电器电子产品回收处理管理条例》提示性说明 为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终止时，请遵守国家废弃电器电子产品 回收处理相关法律法规，将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。 娤⌈ 㨢᳸$䵥ᵥ⍿Ʋ◦䏝㯹䉭❁ᳫ濕媣ᵥ⍿⊭侻ᷘ廞ノ㒞䵽䏳ⴰㄮƲ◦店䢋⾃濕⊭侻斾堿䏦ヵ ⪷ⴰㄮ悅⊔⩜⊭圊䕂㉨㑻Ʋ 限用物質及其化學符號 單元 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr+6 ) (PBB) (PBDE) 塑料外框 ○ ○ ○ ○ ○ ○ 後殼 ○ ○ ○ ○ ○ ○ 液晶面板 － ○ ○ ○ ○ ○ 電路板組件 － ○ ○ ○ ○ ○ 底座 ○ ○ ○ ○ ○ ○ 電源線 － ○ ○ ○ ○ ○ 其他線材 － ○ ○ ○ ○ ○ 遙控器 － ○ ○ ○ ○ ○ 備考1.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。 備考2.
42BDL5055P End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
42BDL5055P Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the selling point.
42BDL5055P NOTICE SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (THIS “AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND MMD MONITORS & DISPLAYS NEDERLAND B.V., A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT PRINS BERNHARDPLEIN 200, 1097 JB AMSTERDAM, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY “MMD”).
42BDL5055P 8. Support Services. MMD is not obligated to provide technical or other support (“Support Services”) for the Software. If MMD does provide you with Support Services, these will be governed by separate terms to be agreed between you and MMD. 9. Limited Software Warranty.
42BDL5055P Open source licenses statement Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. MMD does not bear any responsibility in these sorts of situations. Third Party (Open) Source Software This product may make use of third party (open) source software and the use of this third party (open) source software may be subject to terms and conditions of such third party.
42BDL5055P Step 3: xiii
42BDL5055P Table Of Contents 1. 5.14. Developer options....................................................................40 5.15. About...............................................................................................40 5.16. Supplementary............................................................................41 Unpacking and Installation........................................................1 1.1. Unpacking..............................................................................
42BDL5055P 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2.
42BDL5055P 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 2. Spread a protective sheet on a flat surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.
42BDL5055P 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Table Tabletop stand 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
42BDL5055P 1.6. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise . The “ ” logo should be on the LEFT side when facing the display. 90 90 1.6.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 1 3 2 2. Peel off the protective film at the back of the “ ” logo sticker.
42BDL5055P 1.7. Operating Instructions of Edge Alignment Kit 1.7.1. Installing Edge Alignment Kit • Using “Edge Alignment Kit-1” on adjacent two displays. • Install the “Edge Alignment Kit-1” with 2 PCS of M3 screw. • Using “Edge Alignment Kit-2” on adjacent four displays. NOTE: hen installing the edge alignment kit, please consult a professional technician for proper installation. We accept no liability for installations not W performed by a professional technician.
42BDL5055P 2. Parts and Functions 2.1. Control Panel 1 3 MUTE INPUT 2 4 5 6 7 MENU 8 9 1 [ ] button 9 Use this button to turn the display on or put the display to standby. 2 [MUTE] button 4 -- If the light blinks red, it indicates that a failure has been detected [ ] button -- Lights off when the main power of the display is turned off * Using IR sensor cable for better remote control performance. (Please refer to the instructions of 3.
42BDL5055P 2.2. Input/Output Terminals 22 21 20 19 18 2 1 3 4 7 6 9 8 10 11 15 12 13 14 16 17 AC OUT 14 AC IN 16 AC power supply to the AC IN jack of a media player. 2 MAIN POWER SWITCH IR IN / 5 17 IR OUT 18 This display’s remote control sensor will stop working if the jack [IR IN] is connected. 19 To remotely control your A/V device via this display, refer to page 14 for or IR Pass Through connection.
42BDL5055P 2.3. Remote Control 5 [ ] LIST button No function. 2.3.1. General functions 6 NAVIGATION buttons [ ] 1 Root Menu: Go to Smart picture OSD. Main Menu: Move the highlight bar up to adjust the selected item. IR Daisy Chain Menu: Increase controlled Group ID number. 2 [ ] Root Menu: Go to Audio source OSD. 3 12 4 Main Menu: Move the highlight bar down to adjust the selected item. 13 IR Daisy Chain Menu: Decrease controlled Group ID number.
42BDL5055P 2.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the ID Mode. The red LED lights up. Press the [ID SET] button again will exit the ID Mode. The red LED lights off. You can set the remote control ID when you want to use this remote control on one of several different displays. Press the digit numbers [0] ~ [9] to select the display you want to control. For example: press [0] and [1] for display No.
42BDL5055P 2.3.3. Remote Control buttons on Android source 1 [ ] POWER button Turn the display on or put the display to standby. The button is only controlled by Scalar. 2 1 [PLAY] buttons 1. Control playback of media(video/audio/picture) files. There are 4 ways to play media files. 1) File Manager Find the media file from the File Manager and select it to play.
42BDL5055P 6 NAVIGATION buttons 2. Media Player -> Compose -> edit or new add playlist -> choose 1. Navigate through menus and choose items. any media files -> press 2. In the content of the web page, these buttons are to control the scroll bar of the screen. Press bar up or down. Press or or chosen media file. 15 is for moving vertical scroll 1. Media Player ->Compose -> Edit or new add playlist -> press to open toolbox. Toolbox will be slide from the left side of 3.
42BDL5055P 2.3.4. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting.
42BDL5055P 3. Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN] 3.2. Connecting a PC 3.2.1.
42BDL5055P 3.2.2. Using Video Source input PC Audio Out [VGA AUDIO IN] 3.2.3. Using DisplayPort input DisplayPort Out PC [DisplayPort IN] 3.3. Connecting Audio Equipment 3.3.1.
42BDL5055P 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a DVI daisy-chain configuration. For VGA daisy-chain, Maximum 9 displays can be used. 3.4.1. Display control connection Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2.
42BDL5055P DISPLAY 1 DISPLAY 2 PC [DP] [DP IN] [DP OUT] [DP IN] Connect the [DVI OUT ] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2. DVD / VCR / VCD DISPLAY 1 DISPLAY 2 [HDMI] [DVI IN] [DVI OUT] [DVI IN] 3.4.3. Analog video connection Connect the [DVI-I OUT] connector of DISPLAY 1 to the [DVI-I IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 PC [VGA] [DVI-I IN] [DVI-I OUT] [DVI-I IN] 3.4.4.
42BDL5055P 3.5. IR connection External IR Receiver DISPLAY 2 DISPLAY 1 [IR IN] NOTE: [IR OUT] [IR IN] 1. This display’s remote control sensor will stop working if the [IR IN] is connected. 2. IR loop through connection can support up to 9 displays. 3.6.
42BDL5055P 4. Operation 2. Admin mode: • You can press “Home + 1888” to startup admin mode. NOTE: T he control button described in this section is mainly on the remote control unless specified otherwise. 4.1. Watch the Connected Video Source ] SOURCE button. 2. Press [ ] or [ ] button to choose a device, then press [ button. 4.2. Admin mode will show four icons: “Settings”, “Apps”, “Network” and “Help”. • When you leave admin mode, system will return to last source.
42BDL5055P 2. Select “Play” on home page, first you should choose one playlist to play between FILE 1 and FILE 7. The pencil icon means the playlist is non-empty. 5) Cellular Network (Optional, if device has GSM/LTE module) 3. Select “Compose” on home page, first you should choose one playlist to edit between FILE 1 and FILE 7. The pencil icon means the playlist is non-empty. 6) Help page: Display QRcode page. 4. If an empty playlist is chosen, the app will guide you to select the media source.
42BDL5055P 9. Press play key after you choose desired file, you will play the media file directly. 6. Once you start to edit a playlist, you will see below screen. Source - files in storage. Playlist – files in playlist. There are 4 icons which map to the keys of remote controller. Option key – launch slide bar Play key – play media file. Info key – show media info. Ok key – select/unselect file. 6-1 In the slide bar, it helps you to do the following: - select all : select all storage files.
42BDL5055P 4.5. 12. Media Hotkey Play : Playback file. Pause: Pause file. Fast forward: forward 10 second. Rewind: back 10 second. Stop: Stop file and return to start. If the gif file, it like the pause. Browser manual 1. Home page of Browser app, this page has one item: “Settings”. Press Settings then enter next page. 13. Import text file Step 1. Create media player text file. - File name : mpplaylistX.txt, “X” means playlist number(1,2,3,4,5,6,7).Ex. mpplaylist1.txt, mpplaylist2.
42BDL5055P Back : left side list will be closed. • 4.1 Import • Click import • Choose storage • • File format for import Format should be like below with file extension “txt” 4.2 Export: • Click export • Choose storage • Dialog shows path file will be saved and file’s name. Press “save” button then urls on list will be saved.
42BDL5055P 5. Press OK then url records will be saved 7. OSD menu interaction with Browser 7.1 Boot on source • Set OSD menu => Confiuration1 => Boot on source => Input be BROWER Play List be 0. Then PD will show Browser after reboot. • Set OSD menu => Confiuration1 => Boot on source => Input be BROWER Play List be 1. Then PD will show web page with 1st Url in Browser app. . 7.
42BDL5055P Ex. /storage/emulated/legacy/philips/bookmarklist.txt All media files should be placed in /philips/ of root directory. For example, Step 3. Start browser app, it will auto import browser text file. - pdfs in /root/philips/pdf/ Note : Once the playlist file (text) is imported, if an user change playlist by remote controller, this change will not be written to playlist text file. 4.6. PDF reader play 1. Home page of PDF Player, this page has three items: “Play”, “Compose” and “Settings”.
42BDL5055P 7. If you choose “Sort” in the slide bar, you can change the order of files one by one. 9. Import Text File Step 1. Create pdf player text file. - File name : pdfplaylistX.txt, “X” means playlist number(1,2,3,4,5,6,7). Ex. pdfplaylist1.txt, pdfplaylist2.txt - Content : Step 2. Copy pdfplaylistX.txt to “philips” folder of internal storage. You may use FTP to do this. 8. Select “Settings” on home page, this page has two parts, “Repeat Mode” and “Effect Duration”. - Repeat Mode : play mode.
42BDL5055P Cancel When Ver.3, Server/Account/PIN code is available. Don’t do any change, directly closed Windows. If no customer installed apk, the list will be blank. The list will be blank and “Save””Forget” will be gray and useless. 4.8. Custom App User can set up the application for Customer Source Note: If customer installed apk,user can select customer installed apk in list (1) Only display User Installed app. • (2) Will not show up system pre-install app. Case 1: Not set up Custom App case.
42BDL5055P 5. Signage display 5.1. Setting 5.2.1. DHCP DHCP mode: (1) Cannot modify IP Address, Netmask, DNS Address and Gateway. (2) If connect successfully, it will display current network configuration. Main items: (1) Ethernet (2) Proxy (3) Data usage (Show up when 4G module connected) (4) More (Show up when 4G module connected) (5) Signage Display (6) System Tools (7) Display (8) Storage (9) Apps (10) Security (Show up when 4G module connected) (11) Date & time (12) Developer options 5.2.2.
BDL5055P Tethering & portable hotspot Proxy Main Switch Disable Enable Proxy settings Proxy hostname Proxy port Type HTTP Authentication Authentication Username Password Note: • Proxy type in HTTP, HTTPS, SOCKS4, SOCKS5 are support. • Only support the connection through the proxy server with TCP port 80 & 443 & 5228. • Proxy server with authentication on Windows Sever Series is not support. 5.4. Cellular networks Data usage Only show up when 4G module connected. Preferred network type 5.5.
42BDL5055P Network operators 5.6.1. General Settings Mobile plan 1. Signage Display Name Set up PD name “PD_” + Ethernet Mac Address. Note: Input limitation: (1) length: Max 36 characters (2) format: no limit 5.6. Signage Display Divide into 4 groups: General Settings / Server Settings / Source Settings / Security (1) General Settings A. Signage Display Name B. Boot Logo C. Screenshot 2. Boot Logo 1) Scalar OSD menu to control Android boot logo enable/disable (2) Server Settings A.
42BDL5055P Function introduction: Case 3 a. The user settle customized boot logo, the screen will show /data/ local/bootanimzation.zip. Option description /data/local Use customized boot animation file which is copied from SD card or USB /mnt/external_sd Use boot animations file under SD card /mnt/usb_storage Use boot animations file under USB b. Save Press save key to save SD card or USB bootanimzation.zip to /data/ local and set it as boot logo. c.
42BDL5055P 1) Interval 4)Repeat Set up interval timeframe. 30 mins or 60 mins. Set screenshot repeat cycle. User can choose screenshot time frame. (Multiple selection) 2) Start Time 5)Save to Set up screenshot start time. Set up screenshot save path. Internal storage, SD card or USB storage.) Note: (1) If no start time, the screen will show current time automatically Note: (2) Just press Back key to exit dialog for Set up picture storage path (3) Start time cannot be newer than End time.
42BDL5055P (7) Send screenshots via email After check this item, it will send screenshot to email of administrator Please refer to 6.2.1 Email notification Note: Please confirm Email setting is done. Each screenshot will be sent immediately 5.6.2. Server Settings 1. Email Notification Via Enable/Disable to control Email On/Off) After Enable, user can set up Email notification configuration.
42BDL5055P 2)Manager Email Email 2) Password Set up Receiver mail account Set up FTP password. Note: Input limitation (1) Length: 6-20 characters (2) Format: I. English a-z and A-Z II. Number 0-9 FTP password display (1) Will show “*” symbol to instead password if set up password via remote control. (2) After set up, the password text will show as “*” symbol. Before password input: 3)Test Send Test Mail To test Gmail account receive/send function.
42BDL5055P Bind status: (1) Will show network is disconnected if not yet connects to network. 3)Storage Path Show default path: Internal storage (2) Will show Server is disconnected if network connected but remote control server disconnected. Note: Can only display Internal storage, cannot be modified.(Only show path) (3) Will show Server is unbinded if Remote control server feedback unbinded status. 4) Will show Server is unbinded if Remote control server feedback unbinded status.
42BDL5055P (5)Will show Error PIN code if input incorrect PIN code. (2) Open Media Player slideshow effect edit page. 4. SICP Network Port 2. Browser Change SICP Network Port. Can edit Bookmark configuration. Port range is 1025~65535. (1) Open Browser setting page. 5.6.3. Source Settings 1. Media Player Can Edit Media Player play list and effect settings. 3. CMND & Play 1) Server Setup CMND & Play server address 2) Account (1) Open Media Player Player List edit page.
42BDL5055P When Ver.2, Server/Account/PIN code will be gray and unavailable. (1) Only display User Installed app. (2) Will not show up system pre-install app. Scalar OSD menu operation RCU: Source -> Custom If set up customer APK, PD will open customer app when switch source to Customer mode. If no set up customer APK, PD will show Black screen when switch source to Customer mode. When Ver.3, Server/Account/PIN code is available. Function introduction 4.
42BDL5055P 5.6.5. Security User can select customer installed apk in list Case1. No setup Custom App 1. External Storage Screen will show available apps and focus on first app item automatically. Lock/Unlock external storage. After setup, it will show App name 5.6.6. Others 1. TeamViewer Support Enable / Disable TeamViewer support. Case2. Setup Custom App. (there is a checked circle on right) 2. Platform Web API Enable / Disable Platform Web API. 5.6.4.
42BDL5055P 5.7. System Tools Press OK to execute Reset function automatically. System tools 4 main functions: (1) Clear Storage (2) Factory Reset (3) Import & Export (4) Clone Media Files 5.7.3. Import & Export The function of Import & Export PD settings. Notes. (1) Settings.db (Saved file name: settings.db) (2) Will save to Philips folder in storage 5.7.3.1 Export Signage Display Settings 5.7.1.
42BDL5055P 5.9. Show notification dialog before database import Display User can modify the font size, can choose: Small/Normal/Large/Huge 5.8. Clone Media File 5.10. Storage Clone media file from Internal, SD or USB Philips folder. 1. The cloned folder name under Philips folder Display current PD Android storage information. (1) philips/photo Note (2) philips/music (1) User option key on RCU to show setting option (3) philips/video (4) philips/cms (5) philips/pdf (6) philips/browser 2.
42BDL5055P 5.11. Apps 5.13. Date & time Display applications information. Via Scalar OSD menu to control Auto Time On/Off. Note Note: (1) User options key on RCU to show setting option. Add new NTP server to display current server IP. 5.12. Security 5.14. Developer options Android developer options. 1. SIM card lock Setup/Disable SIM PIN code. 5.15.
42BDL5055P 5.16.2. How to custom an Android boot animation? 2. After select update.zip file, PD will restart and start to update. 3. If not found update.zip. The dialog is no content and the Ok button will be gray and useless. 1. Overview Note: (2) File name should be update.zip. The Android boot animation is used script to load PNG files when the device boots. It is contained within an uncompressed zip file called Bootanimzation.zip. (3) The file should be located in root of storage. 2.
42BDL5055P The above example, the boot animation will play at a resolution of 1920 by 1080 pixels, at a frame rate of 30 fps, starting with the contents of part0 folder and after playing them in one loop, switching to contents of part1 folder and playing them continuously till the device boot complete. Press Home key on RCU: OSD menu -> Configuration 2 -> Logo -> set “on” (3.) Press combination key “Home + 1888” on RCU to go to Admin mode: Settings -> Signage Display -> GENERAL SETTINGS -> Boot Logo 3.
42BDL5055P -- JSON sample intent.putExtra(“packageName”, “com.example.apk_name”); intent.putExtra(“activityName”, “com.example.apk_name.MainActivity”); { sendBroadcast(intent); status: "success", code: 0, 5.16.4. How to connect with platform Web API? decsription: "success", PD has a local web server to provide Web API for customer getting PD information in JSON format. result: { 1. APIs specifications "version": "1.0", -- Protocol: HTTP "currentip": "172.17.3.
42BDL5055P 6. OSD Menu 6.2. An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 6.1. 6.2.1. Picture menu Navigating the OSD Menu Picture 6.1.1.
42BDL5055P Color control Press + button to move screen to right. The color levels of red, green, and blue are adjusted by the color bars. Press - button to move screen to left. R: Red gain, G: G een gain, B: Blue gain. V position Smart picture Control Vertical Image position within the display area of the LCD. PQ setting Press + button to move screen to up. PC mode: {Standard} / {Highbright} / {sRGB}. Press - button to move screen to down. Video mode: {Standard} / {Highbright} / {Cinema}.
42BDL5055P NOTE: This item is functional only when the {Zoom mode} is set to {Custom}. Audio out (line out) Adjust to increase or decrease line out output level. Zoom Maximum volume Expands the horizontal and vertical sizes of the image simultaneously. Adjust your own limitation for the maximum volume setting. This stops the volume from being played too loudly. H zoom Minimum volume Expands the horizontal size of the image only. Adjust your own limitation for the minimum volume setting.
42BDL5055P 6.2.5. Configuration1 menu PIP size Select the size of the sub picture in the PIP (Picture-in-Picture) mode. Choose from: {Small} / {Medium} / {Large}. Picture PIP position Select the position of the sub picture in the PIP (Picture-in-Picture) mode, {Bottom-Right}/{Bottom-Left}/{Top-Right}/{Top-Left}/{Center}/ {Custom}. Screen Audio PIP position/Custom feature: Left/Right {0-10}: adjust PIP windows from Left to Right corner.
42BDL5055P Choose from : {Off} / { On} OSD Transparency Human sensor (require Philips accessory CRD41 External Sensor Box) Adjust OSD transparency. • {Off} - Transparency off. The Human sensor can detect if people approach the display or not. • {1-100} - Transparency level 1-100. The display will turn off backlight if detect nothing in setting time. Information OSD The display will back to backlight on when people approach it.
42BDL5055P 1 • 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 • Once the setup is completed, the option exits to End automatically. • To use this function, serial connect all machines with RS-232 cable and set their Control ports to RS-232 too. Default : Off Sub : Off/On Default : Off OSD Rotate: {Off}, {On} when value is on, OSD rotate 90 °, Off is restored. All: {Off}, {On} when value is on, all Window screen rotate 90 °, Off the reference set individual window.
42BDL5055P • • • {Primary} - Designate this display as the primary display for remote control operation. Only this display can be operated by the remote control. (In primary mode, IR key will always be processed regardless the monitor id/group settings). Date and time {Secondary} - Designate this display as the secondary display. This display can not be operated by the remote control, and will only receive the control signal from the primary display via the RS232C connection.
42BDL5055P 1. Press [OK] or [ ] button to enter the submenu. Auto signal detection Choose to let the display detect and display available signal sources automatically. Schedule • Today 2015 . 01 . 04 SUN 04 : 14 : 01 1 2 3 On ＿ :＿ Input Off ＿: ＿ The options are: {All} / {Failover} ＿ 4 5 MON TUE 6 WED THU FRI 7 SAT playlist SUN 0 Every week Clear all 2. Press [ ] or [ ] button to select a schedule item (item number 1 ~ 7), and then press [OK] button to mark it the item number.
42BDL5055P Power mode in OSD Mode 1/2 Mode 3/4 DC off shutdown 1. The current source APK(such as MediaPlayer, Broswer, PDF or SmartCMS) will be closed. DC on Boot up 2. Android system will go to the default black launcher. 1. Android system reboots Scalar FW Update Update scalar FW by USB. USB cloning Copy PD settings from one set to another. Import: Copy settings from file to display Export: Copy PD settings into file. * Cloned data stores in USB.
42BDL5055P 7. USB device compatibility USB Multimedia Codec Formats Video Decode Type Video Codec Container Decode Encode Channel Remark Supported Image Size:48x48pixels to 1920x1088pixels MPEG1/2 MPEG1/2 File Format: DAT, MPG, VOB, TS Maximum Frame Rate:30fps V Maximum Bit Rate:80Mbps Audio Codec: MP2, MP3 Supported Image Size:48x48pixels to 1920x1088pixels Maximum Frame Rate:30fps MPEG-4 MPEG4 File Format: AVI, MKV, MP4, MOV, 3GP Maximum Bit Rate:38.
42BDL5055P Image Decode Type JPEG Image Codec Photo JFIF file format 1.
42BDL5055P 8. Input Mode VGA Resolution: Standard Resolution Active Resolution H Pixels V Lines VGA 640 480 WVGA 720 400 SVGA 800 600 XGA 1024 768 WXGA WXGA SXGA WXGA UXGA HD1080 1280 1280 1280 1360 1600 1920 768 800 1024 768 1200 1080 Refresh Rate Pixel Rate 60 Hz 72 Hz 75 Hz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 25.175 MHz 31.5 MHz 31.5 MHz 33.75 MHz 40 MHz 49.5 MHz 65 MHz 78.75 MHz 79.5 MHz 79.5 MHz 108 MHz 85.5 MHz 162 MHz 148.
42BDL5055P 9. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
42BDL5055P 9.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 9.5. Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
42BDL5055P 10. Cleaning and Troubleshooting 10.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
42BDL5055P 10.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
42BDL5055P How to setup the settings in the menu to control all the monitors at the same time and individually via RC? Daisy chained by RS232 and no IR cable 1. The first display sets as “Primary” on OSD (Advanced option/IR control item), others set as “Secondary”. 2. The setup OSD will show on Top-Left of display. (Toggle MENU will show again if it disappear) 3. Default setting: ID NO: 0, GP NO: 0, this setting can control all displays by IR.
42BDL5055P 11. Technical Specifications Display: Item Specifications Screen Size (Active Area) 42 inches (106.7 cm) diagonal Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.4833 (H) x 0.4833 (V) [mm] Displayable colors 10 bits(D), 1.
42BDL5055P General: Item Specifications Power Input 100 - 240V~, 50 - 60Hz, 5.5A Power Output 100 - 240V~, 50 - 60Hz, 2.5A Power Consumption (Max) 220 W Power Consumption (typ.) 85 W Power Consumption (Standby & Off) <0.5 W (RS232 in active) Dimensions (Without Stand) [W x H x D] 946.9 x 541.0 x 71.1 mm Weight (Without Stand) 15.3 Kg Gross Weight (Without Stand) 19.6 Kg Product Fiche : Item Specification Energy Efficiency Class C Visible Screen Size 106.
2017 © Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
