Philips Commercial Solutions User Manual 26HF5545D 32HF5545D 32HF7945D 26HF7945D 42HF7945D 26HF7955H 32HF7955H STOP Thank you for choosing Philips. Need help fast? Read your Quick Use Guide and/or Owner’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.
Contents Important Safety Instructions ............ 2 Definitions, Acronyms and Abbreviations ..................................... 31 Safety Information and Useful Tips ... 5 USA Limited Warranty .................... 34 Before Calling Service ......................... 6 Who is covered? ........................................... 34 Basic TV Connections .......................... 8 What is covered? .......................................... 34 Antenna Connection......................................
Important Safety Instructions Read before operating equipment 1. For the quickest and most trouble free installation, please consult the quick start guide that came packed in the Television (or down load it from www.philips.com/ hospitality if you have lost it). 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this TV near water. 6. Clean only with a dry, soft, non-abrasive cloth. 7. Do not block any of the ventilation openings.
Important Safety Instructions Read before operating equipment 17. Stand, Wall or Ceiling Mounting - Philips warrantees that this product is safety tested and UL Certified when mounted with the enclosed stand or stands sold by Philips. No such warrantees are made regarding third party mounts or stands. 18. Power Lines - An outdoor antenna should be located away from power lines. 19.
Important Safety Instructions Read before operating equipment Example of America Grounding as per NEC - National Electric Code ANTENNA LEAD-IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS ELECTRIC SERVICE EQUIPMENT Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN POWER SERVICE GROUNDING ELECTRODE EQUIPMENT (NEC ART 250, PART H) WARNING: To reduce the risk of fire or electric shock, this appliance should not b
Safety Information and Useful Tips 1. Two people are required to lift and carry a TV that weighs more than 55 pounds. Improper handling of the TV can cause serious injury. 2. If you place the TV set on a solid surface. Ensure the surface is level and that it can withstand the weight of the TV. 3. Installing the TV on the wall requires special skill that should only be performed by a qualified personnel. You should not attempt to do the work yourself.
Before Calling Service If you are experiencing problems, check this list of symptoms and suggested steps to take before requesting service. You may be able to solve the problem yourself. Note: Please become familiar with the commercial features as described in TV installation / Setup because the effects of several of these features, if not thoroughly understood might appear as faulty operation.
Before Calling Service Symptoms Picture Display Suggested steps to take • Uneven color display. • Ensure that the TV is not placed near any speakers or magnetic objects. • Double image / "ghost" image • Check antenna, cable or set-top box. • Snowy / noisy picture • Check antenna, cable and / or setup box connections. Ensure that they are properly connected. • Poor or no picture • Possible electrical interference from appliances or other sources.
Basic TV Connections Antenna Connection Connect the antenna or RF cable signal to the 75 ohm RF 'F' connector socket located on the TV.
Use and Care of Optional Remote Controls To load batteries into the remote control: • Remove the battery compartment lid from the back of the remote control. • Insert two AA-sized batteries into the battery compartment, making sure the positive + and negative - polarity line up correctly as indicated inside the case. • Re-attach the battery compartment lid. Note: Always remove batteries from the remote control if it is not used for a long period of time.
Overview of TV Connectors and Controls Warning : • Risk of electric shock. Rear jack panel must be removed by qualified personnel only. • Do not connect any telephone cables or equipment to Data 1 (RJ12) & Data 2 (RJ45) connectors. 1. . POWER To switch the TV on and off. To disconnect from the mains, remove the mains cord from the mains socket at the back of the TV or remove the mains plug from the wall socket. 2. - CHANNEL + To select a channel. 3. MENU To display or close menus. 4.
Optional Remote Controls The following remote controls are applicable to Philips Business Display Solutions TV products. These can be used for setup and configuration purposes. RC2573GR is an optional remote control for Institutional TV / Business Display Solutions features and Smart Card settings. It can be purchased separately. RC2888/01 Guest Mode Remote Control (optional) POWER RECALL TEXT SMART SLEEP CC Slide this button up to enter into Guest mode.
Guest Remote Control Keys 1 2 3 4 5 10 11 12 6. Navigation cursors To navigate through the menus/ submenus. 13 7. Volume + / – To adjust the TV volume. 14 6 7 5. Menu To call up or exit the menus. 15 16 8. 0 to 9 Digit keys To select a TV channel. For a two digit number, enter the second digit before the dash disappears. 9. Alternate Channel To toggle between the alternate channels 10. Channel Guide To activate the channel guide function. 8 11. Standby Power the TV off or on. 9 17 12.
Overview of TV Setup Main Menu / Sub-Menus SETUP LANGUAGE ENGLISH, ESPANOL, FRANCAIS COMMUNICATION COMMUNICATION SP - SPI, SP - I2C, HM -LINK, SERIAL XPRESS, MULTI RC, SMART - RC, OFF STORE > DCM TYPE GENERIC, NO SOURCE SWITCH CHANNEL INSTALL CHANNEL TV 2 INPUT TUNER, AV, SVIDEO, CVI, VGA, HDMI, *CARD CVBS, *CARD-YC, *CARD CVI CHANNEL LOGO > DIGITAL NO, YES RINGS (1) (2) (3) (4) LABEL ( MUTE NONE, AUDIO, VIDEO )> AUTO INSTALL TV START CABLE TUNING NO, YES USE CHANNEL TABLE NO, YE
Accessing the Setup Menu The following remote control commands are applicable to Philips Business Display Solutions TV products. These can be used for setup and configuration purposes. ACCESSING TV SETUP MENU USING THE REMOTE CONTROL (RC2573GR) 1. Slide the button to the Setup location. POWER RECALL TEXT SMART SLEEP CC GUEST DCM SETUP 1 2 3 4 5 6 7 8 RESET 0 9 GUIDE CH 2. Press the button on the remote control to activate the TV Setup Menu.
Installation A. Selecting the language COMMUNICATION COMMUNICATION STORE DCM TYPE You can select ENGLISH, ESPANOL or FRANCAIS as your preferred language. • Press the > button repeatedly to select your preferred language.
Installation 1. Press the > button to enter into the CHANNEL INSTALL menu. SETUP LANGUAGE COMMUNICATION CHANNEL INSTALL AUTO INSTALL TV CABLE TUNING USE CHANNEL TABLE CURRENT RING DIGITAL SETUP CONFIGURATION ENGLISH > > > NO NO RING1 > > • Press the > button to enter into the CHANNEL INSTALL menu. CHANNELINSTALL INSTALL CHANNEL CHANNEL TV 2 INPUT TUNER CHANNEL LOGO > DIGITAL NO RINGS (1 ) (2 ) (3 ) (4 ) LABEL ( )> MUTE NONE 3.
Installation • Press the Digit 0 button on your remote control to confirm selection. • You can also choose to input text for the selected channel. Press Digit 5 on your remote control to use keyboard • Use the < > < > buttons to navigate and select the character and press Digit 0 to input text. Repeat step until you have completed your input of text.
Installation 7. Searching the Digital Major Channels / RF Channel Number CHANNELINSTALL INSTALL CHANNEL • For DIGITAL MAJOR CH / RF CHANNEL NUMBER, key in the channel number (1 to 999) using the Digit 0 - 9 buttons. 8. Searching the Digital Minor Channel / MPEG Program Number • For DIGITAL MINOR CH / MPEG PROGRAM NUMBER , use the Digit 0 - 9 buttons to key in the channel number (0 to 999). • Press the < button from Channel 0 to select NO. • If NO is selected, go back to DIGITAL MAJOR CH.
Installation E. Selecting Cable or Antenna mode CHANNELINSTALL INSTALL CHANNEL CHANNEL INPUT CHANNEL LOGO DIGITAL DIGITAL CH SCROLL DIGITAL MAJOR CH DIGITAL MINOR CH RINGS LABEL MUTE TV 2 TUNER > YES > 1 0 (1X ) ( 2 ) (3 ) (4 ) (SPO_ )> AUDIO D. Tuning channels automatically 1. Press the > button to enter START mode. 1. Select YES to use Cable mode and NO to use Antenna mode.
Installation Most HD stations are assigned Physical channel numbers that differ from their traditional analog channel numbers. So the channel you know as Channel 2, is actually broadcasting its HD signal on a physical channel unrelated to Channel 2, say 19.1 for example. Selecting YES will cause the HD broadcast of Channel 2 to appear as Channel 2.1, the virtual channel instead of the physical location of the broadcast, 19.1. G. Enabling your current ring Four groups of RING are available. 1.
Installation FACTORY CHANNEL RESET allows you to clear the digital channel map. Note : You need to do an automatic installation after FACTORY CHANNEL RESET is confirmed. • Press the > button to enter the Preferred Language mode and select your preferred language. AUDIO LANGUAGE CHANNEL INSTALL • Press the < > buttons to select the item you want to configure. ENGLISH SPANISH FRENCH SELECTED • Press the < > buttons to select option. 2.
Installation • Press the > button to enter the DIGITAL CC SETUP menu and select your default Closed Captioning option and also configure the digital text / background properties of digital CC. 4. Activating the Emergency Alert Use this option to enable or disable MEDIUM to LOW alert. • Select ON option to enable EMERGENCY ALERT. Note : HIGH Emergency Alert cannot be disabled I.
Installation 1.
Installation 3. Specifying the Security options In the SECURITY menu, you can select the option to enable access to the SETUP menu without a RC2573GR setup remote control. CONFIGURATION CHANNEL INSTALL SWITCH ON / OSD PICTURE / SOUND SECURITY CONTROL VIDEO ADJUSTMENTS FEATURES CC / V-CHIP > > > > > > > Note :The default security setting is STANDARD. When security setting is in STANDARD mode, it may be vulnerable to unauthorized operations.
Installation 4. Configuring the Control options The CONTROL menu allows you to select and configure the settings and options for : – ESP (Energy Saving Programmability) – Digit Timeout – 3 Digit Entry – Source Menu Item – Channel Guide – Minimum Volume – Maximum Volume • Press the > button to enter the CONTROL menu.
Installation CONTROL CHANNEL INSTALL ESP DIGIT TIMEOUT 3 DIGIT ENTRY SOURCE MENU ITEM CHANNEL GUIDE MIN VOLUME MAX VOLUME 2 3.0 NO NO NO 10 35 • In the 3 DIGIT ENTRY option, select YES to enable channel selection of 1 to 250 for cable mode and 2 to 250 for antenna mode. Select NO enable channel selection of 1 to 99 for cable mode and 2 to 99 for antenna mode.
Installation • Press the < > buttons to select the item you want to configure. CONTROL ESP DIGIT TIMEOUT 3 DIGIT ENTRY SOURCE MENU ITEM CHANNEL GUIDE MIN VOLUME MAX VOLUME 2 3.0 NO YES NO 10 35 5. Adjusting the Picture horizontally and vertically The VIDEO ADJUSTMENTS options allows you to adjust the picture horizontally and vertically. This is useful for configuring channels that have tickers or scrolling banners at the bottom such as news and sports channels.
Installation • The SMARTPOWER option allows you to put the TV in an energy saving mode which can save up to 30% in energy consumption costs. • Select from LOW, MEDIUM or HIGH to activate energy saving mode.
Installation CONFIGURATION CHANNEL INSTALL FEATURES SMARTPOWER SMART SOUND KEY DEFAULT HDMI AUDIO LOW POWER STANDBY LOUD SPEAKER MUTE LOW SMART SOUND AV AUDIO YES NO • In the LOUD SPEAKER MUTE option, select YES to mute the TV speakers permanently. FEATURES CHANNEL INSTALL SMARTPOWER LOW SMART SOUND kEY SMART SOUND DEFAULT HDMI AUDIO AV AUDIO LOW POWER STANDBY YES LOUD SPEAKER MUTE YES 7.
Installation • The DIGITAL CC MODE option allows you to set your digital CC options from CS1 to CS6. In the ANALOG CC MODE option, it allows you to set your analog CC options from CC 1 to CC 4 and TXT 1 to TXT 4. Note : If Digital CC option that was selected is not available in the current digital channel, the TV will switch to Analog CC mode.
Definitions, Acronyms and Abbreviations APAC Automatic Pixel Aging Correction. A technique whereby the image displayed on the television screen is periodically shifted slightly, for the purpose of minimizing plasma panel phosphor “burn-in”. A/V Audio / video. BDS Business Display Solutions. See PBS. Bit Rate Sometimes written “bitrate”, the frequency at which bits are passing a given (physical or metaphorical) “point”, quantified in terms of bits per second (bit/s). CVI Component video input.
Definitions, Acronyms and Abbreviations MPEG Moving Picture Experts Group. General term for a range of audio and video compression, and the name of the standards organization for digital video and digital audio compression. Operates under the auspices of the International Organisation for Standardization (ISO). ITV Institutional Television. See PBS. Commercial / non-consumer division of Philips Consumer Electronics Co. NA Not available, not applicable. NC Not connected, no connection.
Definitions, Acronyms and Abbreviations RTP Real-time Transport Protocol. Defines a standardized packet format for delivering audio and video over the Internet. Setup Mode See System 7. Remote control mode used to configure Philips Institutional Televisions for specialized and/or restricted features such as front panel lockout, volume range, channel list, etc.. SmartPort™ Philips proprietary three-wire synchronous serial communications and control interface. SmartPlug™ See SmartPort.
USA Limited Warranty Thank you for purchasing this PHILIPS branded Commercial Television. All Philips branded commercial televisions are designed and manufactured to high standards and deliver high-quality performance. Within the first year of purchase, this two-year Limited Warranty may entitle you to receive an “Advance Exchange*” model on-site within 72 hours of qualification.
USA Limited Warranty WHAT WE WILL DO TO CORRECT PROBLEMS? *For the first year, the defective Product will be exchanged with a new Product (or one that has been renewed to original specifications) and delivered within seventy-two hours of qualification. During the second year, the defective product will be exchanged with one that has been renewed to original specifications and delivered via Ground Transportation.
USA Limited Warranty HOW TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS? OR WHERE CAN I GET MORE INFORMATION? Before requesting service, please check your owner’s manual as adjustments of the controls discussed there may save you a service call. Also, please prepare the following details so we can solve your problem quickly.
Cleaning and Care Environmental Care • Do not touch the screen with anything hard as this scratch, mar or damage the screen permanently. • • Do not rub with dust clothes with chemical treatment. • Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). This Philips Institutional Television product and its packaging contain materials that can be recycled and re-used.
Index A G Accessing the setup Menu 14 Antenna mode 19 Audio select 28 Automatic channel tuning 19 Guest remote control keys 12 B I Important safety instructions 2 K Basic TV connections 8 Before calling service 6 Keyboard lock 24 C L Cable mode 19 CC (Closed Caption) 29 Changing channel settings 15 Channel guide 26 Channel install 16 Channel logo 16 Cleaning and care 37 Communication source 15 Configuration 22 Control options 25 Current ring 20 Language selection 15 Loud speaker mute 29 Low powe
Selecting input source 16 Smartpower 28 Smart RC 15 Smart sound key 28 Source menu item 26 Switch on/ OSD 23 T Three digit entry 26 U U.S.A.
© 2007 Koninklijke Philips N.V.