Register your product and get support at www.philips.com/welcome 32PFL3514D 32PFL3504D 42PFL3704D EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U.S.A., Puerto Rico, or the U.S.
1 Notice 4 2 Important 5 5 5 5 5 Product Information Screen Care Environmental Care Regulatory Notices 3 Your TV Side Controls and Indicators Remote Control 4 Get Started Position the TV Insert the Remote Control Batteries Connect the Antenna or Cable Connect the AC Power Cord (Available for 42PFL3704D only) Manage Cables Switch on and Set Up the TV 5 Use Your TV Switch Your TV on/off or to Standby Switch Channels Adjust Volume Still Mode Watch Channels from a Set-top Box Watch Connected Devices Watc
Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.
1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
1 Notice 2009 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
Environmental Care English 2 Important Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure: • Proof of Purchase Returning the enclosed card guarantees that your date of purchase is on file, so no additional paperwork is required from you to obtain warranty service.
3 Your TV Remote Control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. a b Side Controls and Indicators c s 32PFL3504D / 32PFL3514D VOLUME e r q p * e f d MENU CHANNEL d g c o h n i b . POWER a 42PFL3704D j VOLUME e k d MENU CHANNEL c m l b . POWER a a Standby indicator / remote control sensor b . POWER: Switches the TV on or off.
English c FORMAT Selects a picture format (see ‘Change picture format’ on page 16). d SAP Digital Mode (DTV) • Press to select the audio language. Analog Mode (TV) • Press to select the audio mode. e FREEZE Press to pause screen image. f OK Activates a selection or accesses the menu. g (Navigation buttons) Navigates through the menus. h INFO Displays information about the TV channel or accessory device. The quality and accuracy of the information depends on the broadcaster.
4 Get Started Insert the Remote Control Batteries This section supplements information in the Quick Start. For information about how to mount and install your TV, refer to the Quick Start. Position the TV Warning • Do not insert the power plug into the wall socket before all the connections are made. • Large screen TVs are heavy. Two people are required to carry and handle a large screen TV. • Before you move the TV, disconnect the cables to prevent breakage.
Connect a set-top box through RF IN/OUT Any DTV programs that are broadcast in your area can be received for free through an antenna connection. If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel specified by the service provider. Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.
Connect a set-top box through component video input or HDMI 32PFL3504D / 32PFL3514D Connect the AC Power Cord (Available for 42PFL3704D only) Warning • Verify that your power voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different. 1 2 3 Locate the power connector at the back of the TV. The location of the power connector varies according to TV model. Insert the AC power cord fully into the power connector.
Route your antenna cable and all other cables through the cable holder at the back of the TV. The holder helps keep your cables tidy and easily manageable. 1 2 Keep the cable through this holder to avoid tangle them. 32PFL3504D / 32PFL3514D English Manage Cables Attach the cable holder as illustrated below.
Switch on and Set Up the TV Press Í or Æ 5 times to select the side of the pictures that is the most pleasing to you. then press OK. Before you switch on the TV, check that the AC power cord is properly connected. Press . POWER at the right side of the TV, or press . on the remote control. The TV normally takes 25-30 seconds to start up and the following screen appears the first time you turn on the TV. Left side Right side Initial Setup Select your menu language.
5 Use Your TV English Switch Channels 32PFL3504D / 32PFL3514D This section helps you perform basic TV operations. Switch Your TV on/off or to Standby CHANNEL 32PFL3504D / 32PFL3514D . POWER 42PFL3704D CHANNEL 42PFL3704D . POWER To switch on • Press . POWER at the side of the TV. • Press . (Standby-On) on the remote control. To switch to standby • Press . (Standby-On) on the remote control. To switch off • Press . POWER at the side of the TV. Press CHANNEL +/- on the side of the TV.
Adjust Volume Still Mode You can pause the image shown on the TV screen. 32PFL3504D / 32PFL3514D Press FREEZE to pause the image shown on the TV screen. FREEZE VOLUME • • The sound output will not be paused. If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted. • The still function will be released after 5 minutes. To cancel still mode, press any button except . (Standby-On).
Watch a DVD 1 To watch a DVD 1 2 Insert a DVD disc into your player. Press on the remote control of the DVD player to select channels. » The DVD might automatically play on the TV. If the picture does not appear English DTV Press SAP to display the currently selected language and the number of available languages. 6.1 English 1/3 2 • Press SAP repeatedly to cycle through the available audio languages. Available languages differ depending on the broadcast.
6 Use More of Your TV PC Settings Change Picture and Sound Settings 1 Change picture settings 2 This function lets you adjust the PC screen position during PC input through the HDMI 1 input jack. Press MENU on the remote control and select [FEATURES] > [PC Settings]. Adjust the setting. [Position Reset] Press • 1 2 * Press OK to enter the [PICTURE].
Summary of picture formats For PC input signal through HDMI1 input mode English Four types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And three types of display modes can be selected for PC input signal. [Normal] For 4:3 video signal [Normal] [Full] [16:9] [Dot By Dot] Normal Display a proportionately stretched picture. Sidebars appear on both edges of the screen.
Summary of sound settings Change sound settings 1 Press MENU on the remote control and select [SOUND]. PICTURE Auto Sound SOUND Equalizer SETUP Vir tual Surround Sound On FEATURES Auto Volume Leveling Off LANGUAGE TV Speakers Speakers EasyLink Standard USB 2 3 Press Î or ï to highlight a sound setting and press OK to select the setting. Adjust the following items. [Auto Sound] Press Î or ï to select the desired setting, then press OK.
Use Child Control and Rating Locks You can prevent your children from watching certain programs or certain channels by locking the TV controls and by using ratings. Set your PIN 1 2 Press MENU on the remote control and select [FEATURES] > [Child Lock]. Enter a 4-digit PIN on the Number buttons, of the remote control. • If you have not set up your PIN, enter 0000. Change your PIN 1 2 3 4 Press MENU on the remote control and select [FEATURES] > [Child Lock] > [Change PIN].
Summary of US Movie ratings Summary of TV ratings Age rating Content rating Rating Description TV-Y: Appropriate for children of all ages with themes and elements suitable for children aged 2-6. TV-Y7: Programs designed for children age 7 and older. TV-G: Programs suitable for all ages. These programs contain little or no violence, no strong language and little or no sexual dialog or situations.
The caption service displays transmitted CC- and T- text. The caption text can be displayed permanently or only when the TV is muted. Select DTV caption services 1 Note • Closed caption will not be displayed when you are using an HDMI connection. • The captions do not always use correct spelling and grammar. Select a caption service for digital channels: • Press MENU on the remote control and select [FEATURES] > [Closed Caption] > [Digital Caption Service].
2 Press or select the desired mode, then press OK. Disconnect a USB storage device Caution 3 On Select if you want to reduce the power consumption. Off The power consumption may possibly exceed the limited requirement of the ENERGY STAR® qualification. Press MENU to exit. View Photos and Play Music on a USB Device (Available for 42PFL3704D only) • To avoid damaging the USB device always exit the on-screen menu and wait five seconds before you remove the USB device.
Press a number 2 (Number buttons) to toggle between [List] and [Thumbnails]. USB0 Image1.JPG Configure how the slideshow is played You can configure the following features of your slideshow. Feature Description [More details] Displays the picture name, date, size and next picture in the slide show. Displays a list of available transition styles of the pictures. Sets the amount of time that a picture is shown. Rotates a picture. Displays a list of available magnifications. Starts or stops a slide show.
7 Install Channels 2 The first time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to reinstall and fine-tune channels. 3 Select Your Menu Language 1 Press MENU on the remote control and select [LANGUAGE]. PICTURE SOUND English Back SOUND Autoprogram will rescan all channels. Auto programming will take up to 20 minutes to complete. SETUP Seleccione el idioma para el menú.
Press or to select the channel you want to remove, then press OK. 2 Press a number (1 to 135) to enter the number of the channel you want to add, then press OK. 10 PICTURE DTV 40.1 SOUND DTV 40.2 SETUP DTV 40.3 FEATURES Highlight channels for Ch Up/Down key selection. PICTURE LANGUAGE SOUND USB SETUP FEATURES Ch Select • OK Watch/Skip BACK The channel display for the removed channel darkens. You will not be able to select the channel again using CH +/-.
8 Update Your TV Software Philips continuously tries to improve its products and we strongly recommend that you update the TV software when updates are available. New software can be obtained from your dealer or downloaded from the www.philips.com/welcome website. Use the type number of your TV (e.g. 32PFL3504D) to find information. Upgrade software 1 2 3 Prepare the software upgrade (see ‘Prepare for the software upgrade’ on page 26). If theTV is on, press .
English 9 Connect Devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. Connection Overview 32PFL3504D / 32PFL3514D VIDEO a S-VIDEO COMPONENT Y b VIDEO Pb L f AUDIO R AUDIO OUT L Pr L AUDIO HDMI 2 R c AUDIO R g HDMI 1-IN L AUDIO DIGITAL AUDIO OUT (COAXIAL) h R SERVICE TERMINAL ANT.
42PFL3704D a b DIGITAL AUDIO OUT VIDEO 1 (COAXIAL) COMPONENT Y c d AUDIO OUT S-VIDEO L S-VIDEO Pb AUDIO VIDEO R Pr L L AUDIO R L AUDIO R VIDEO L HDMI 1-IN AUDIO AUDIO j k R R VIDEO 2 e f g ANT. IN l h HDMI IN HDMI 1 USB HDMI IN HDMI 3 HDMI 2 m i a VIDEO 1 S-VIDEO (back) S-Video (back) input connector to be used with Audio L/R connectors for camcorder, game console, etc. When you use the S-Video (back) for video signals, do not use Composite video (back) for video signals.
S-Video - Good quality English Select Your Connection Quality HDMI - Highest quality S-Video cable and audio L/R cable (red/white) For analog connections. Use an S-Video cable together with an audio L/R cable. Supports high-definition signals and gives highest picture and sound quality. Video and audio signals are combined in one cable. You must use HDMI for full high-definition video and to enable Philips EasyLink.
Connect Your Devices available for 42PFL3704D only This section describes how to connect a selection of devices with different connectors. Different types of connectors can be used to connect a device to your TV. The following sections describe examples only, other configurations are possible. AUDIO L/R + VIDEO IN When you connect composite or component cables, match the cable colors to the connectors on the TV.
Connect a DVD player/recorder via HDMI-DVI and DIGITAL AUDIO OUT connectors English Connect a set-top box, DVD player/recorder and game console via HDMI 32PFL3504D / 32PFL3514D 32PFL3504D / 32PFL3514D OUT AUDIO L/R IN HDMI 1 IN only DVI OUT 42PFL3704D 42PFL3704D IN AUDIO L/R HDMI 1 IN only OUT DVI OUT EN 31
Connect a DVD player/recorder via component video output connectors (YPbPr) and analog audio Connect a set-top box via a composite connector 32PFL3504D / 32PFL3514D 32PFL3504D / 32PFL3514D Selected TV models can display 1080i, 720p and 480p DTV signals when connected to a DTV set-top box. Set the output of the cable box to either 1080i, 720p or 480p. A DTV signal must be available in your area.
Connect a digital home theater amplifier Connect a PC with an S-Video connector at the side English 32PFL3504D / 32PFL3514D 32PFL3504D / 32PFL3514D S-VIDEO IN OUT DIGITAL AUDIO IN OUT IN OUT AUDIO L/R 42PFL3704D 42PFL3704D S-VIDEO OUT DIGITAL AUDIO IN AUDIO IN IN OUT AUDIO IN OUT For legal reasons, the digital audio signal can be muted for copy-protected PCM audio qualities on accessory devices connected through HDMI.
Connect a PC with an HDMI connector Connect a PC with a DVI connector 32PFL3504D / 32PFL3514D 32PFL3504D / 32PFL3514D AUDIO IN HDMI AUDIO OUT IN HDMI 1 IN only OUT DVI OUT 42PFL3704D 42PFL3704D AUDIO IN AUDIO OUT HDMI 1 IN only 34 EN HDMI IN DVI OUT OUT
Possible cause and solution The TV is not connected to the power. Press POWER at the side of the TV or on the remote control. Ensure that the AC power cord is connected tightly to the TV power connector and to the power socket outlet. Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect the AC power cord. Connect the TV to a different power socket outlet. Error message HDCP authentication fail. Ensure that your HDMI cable is certified.
11 Notes for the Use of USB Devices (available for 42PFL3704D only) Digital Content Issues • Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting can result in unreadable content. If such problems appear try to re-format the card. Be aware that formatting the card will also delete all the content on it (pictures, music, …). • Only linear JPEG picture formats are supported. Progressive JPEG and JPEG2000 encodings are not supported.
Connections Component video input with Audio L/R: Note • Product information is subject to change without prior notice.
13 Warranty LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.
A Antenna S 8 C Cables component composite HDMI S-Video Channels install list lock Child lock lock channels PIN code ratings lock connection quality Closed captions E EasyLink Environmental care H Home mode L Location mode (Retail or Home) P PC Picture format Picture settings Power Product information R Ratings Remote control insert batteries overview Retail store mode 29 29 29 29 24 24 19 19 19 19 29 21 18 5 Settings assistant Side controls Sleep timer Slideshow Software update version Sou
40 EN
TELEVISOR A COLOR DE CRISTAL LIQUIDO (LCD) LIQUIDO (LCD) IMAGEN VISIBLE ENERGIA 32PFL3504D 32”(81,28cm) 80,00cm 120V ~ 60Hz 155W 32PFL3514D 32”(81,28cm) 80,00cm 120V ~ 60Hz 155W 42PFL3704D 42”(106,68cm) 106,68cm 120V ~ 60Hz 262W IMPORTADOR: P&F MEXICANA. S.A. DE C.V. Av. La Palma No.6, Col San Fernando la Herradura C.P. 52787 Huixquilucan Edo. De Mexico Tel. 52 69 90 00 LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO. © 2009 Koninklijke Philips Electronics N.V.