User Manual

Q5551_0.140.32.0 (Date published: 2011-03-04)
• Slow in switching between digital cable (DVB-C) channels.
• Macro-blocks appear on digital (DVB-T) channels.
Q5551_0.140.29.0 (Date published: 2011-02-17)
• To enable the TV to accept Com Hem CAM software upgrade via OAD. (Only applicable to country,
Sweden).
Q5551_0.140.27.0 (Date published: 2011-01-11)
• The TV is intermittently loosing sound on the DIGITAL AUDIO OUT (S/PDIF) connection.
• Not all channels/services can be found during channel installation. (Only applicable to country,
Switzerland)
• The TV is intermittently loosing sound when you connect an external device via HDMI.
• Picture is distorted with vertical lines and micro-blocks while watching digital cable (DVB-C) channels.
(Only applicable to country, Finland)
• Unable to view “France 24” service in Net TV. (Only applicable to Net TV models)
Q5551_0.140.25.0 (Date published: 2010-11-18)
• TV will not display the subtitles when Danish menu language is selected.
• TV has no picture after it wake-up from standby if the TV was in HDMI source before the TV is
switched to standby.
• TV turns on by itself from standby.
• TV has no picture after switching between channels from ZIGGO network.
• Introduction of the new Net TV Service Portal 2.5. (Only applicable to Net TV models)
Q5551_0.140.23.0 (Date published: 2010-10-28)
• Unable to view Teletext and/or subtitles are missing on certain channels. (Only applicable to country,
Finland)
• TV goes into standby by itself after 2 to 3 hours of operation.
• TV does not display the video in its native format through USB.
• Picture judders while watching digital channels.
• Picture judders during playback via USB.
• TV switches OFF and ON by itself while watching satellite channels. (Only applicable to K-models)
• Unable to view video in full screen for certain Net TV services. (Only applicable to Net TV models)
• Net TV portal language is default to English regardless of the country and language settings. (Only
applicable to Net TV models)