Register your product and get support at 5301 series www.philips.
Contents 1 TV tour 1.1 Smart TV 4 1.2 App gallery 4 1.3 Rental videos 4 1.4 Pause TV and recordings 1.5 Smartphones and tablets 2 Setting up 4 4 5 10 5 Switching On and Off 16 Multi room 17 Settings 48 48 48 49 17.1 Quick settings 49 17.2 Picture 49 17.3 Sound 52 17.4 Eco settings 55 17.5 General settings 55 17.6 Clock and language 58 17.7 Universal access 60 23 18 Networks 62 19 Channel installation 25 63 63 19.1 Antenna/cable installation 19.
22.2 22.3 22.4 22.5 Using help 82 Troubleshooting 82 Online help 84 Consumer care / Repair 23 Safety and care 23.1 Safety 85 23.2 Screen care 24 Terms of use 25 Copyrights 84 85 86 87 88 25.1 MHL 88 25.2 HDMI 88 25.3 Dolby Digital Plus 88 25.4 DTS 2.0 + Digital Out ™ 25.5 DTVi 88 25.6 Java 88 25.7 Microsoft 88 25.8 Wi-Fi Alliance 88 25.9 Kensington 89 25.10 MHEG software 89 25.
* Depending on the video streaming service of the selected video store. 1 TV tour 1.4 1.1 Pause TV and recordings Smart TV If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel. Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.
according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 2 Setting up 2.1 Read safety 2.3 Read the safety instructions first before you use the TV. Tips on placement To read the instructions, in Help, press the colour key Keywords and look up Safety instructions. • Position the TV where light does not shine directly on the screen.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. For more information, in Help, press the colour key Keywords and look up Switching on for more information. 2.5 Antenna cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
select Done to make the connection immediately. If your router supports WPS or WPS PIN, you select WPS, WPS PIN or Standard. Select your choice and press OK. 7 - A message will be shown when the connection is successful. 3 Network 3.1 Network and Internet Home network WPS To enjoy the full capabilities of your Philips TV, your TV must be connected to the Internet. If your router has WPS, you can directly connect to the router without scanning for networks.
• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality. • Use a high-speed (broadband) Internet connection for your router. Network settings View network settings You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc. DHCP • If the connection fails, you can check the DHCP (Dynamic Host Configuration Protocol) setting of the router. DHCP should be switched on.
1 - Press , select Network and press (right) to enter the menu. 2 - Select TV network name and press OK. 3 - Enter the name with the on-screen keyboard. 4 - Select Done to confirm the change. 5 - Press (left) repeatedly if necessary, to close the menu. enter the menu. 2 - Select Digital Media Renderer - DMR and press OK. 3 - Select On and press OK. 4 - Press (left) repeatedly if necessary, to close the menu.
4 HDMI ports Connect devices HDMI quality 4.1 An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for TV signal. About connections For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m. Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
HDMI MHL With HDMI MHL, you can send what you see on your Android smartphone or tablet to a TV screen. The HDMI 1 connection on this TV incorporates MHL 2.0 (Mobile High-Definition Link). This wired connection offers great stability and bandwidth, low latency, no wireless interference and good quality sound reproduction. On top of that, the MHL connection will charge the battery of your smartphone or tablet. Although connected, your mobile device will not be charging when the TV is on standby.
Only devices that support EasyLink Remote Control function will respond to the TV remote control. Auto switch off devices You can set the TV to switch off the connecting HDMICEC compliant devices if they are not the active source. The TV switches the connected device to standby after 10 minutes of inactivity. EasyLink On or Off You can switch EasyLink on or off. The TV comes with the EasyLink settings switched on.
CVBS - Audio L R CVBS - Composite Video is a high quality connection. Next to the CVBS signal adds the Audio Left and Right signals for sound. • Y shares the same jack with CVBS. • Component and Composite share audio jacks. For 5362 series For 5362 series 4.2 CAM with smart card - CI+ CI+ This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region.
instruction you received from the operator. 4.3 To insert the CAM in the TV… Receiver - Set-Top Box 1 - Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV. 2 - While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot COMMON INTERFACE. 3 - Push the CAM in as far as it will go. Leave it in the slot permanently.
after a 4 hour period without a key press on the remote control of the TV. Connect with HDMI ARC For more information, in Help, press the colour key Keywords and look up Switch off timer for more information. Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. HDMI ARC If your Home Theatre System has an HDMI ARC connection, you can use HDMI 2 on the TV to connect.
3 - Select Off. 4 - Press (left) repeatedly if necessary, to close the menu. Audio out offset If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms. For 5362 series The Audio out delay setting should be switched on.
press OK. 3 - Select More, Medium, or Less, then press OK. 4 - If the volume difference is large, select More. If the volume difference is small, select Less. 5 - Press (left) repeatedly if necessary, to close the menu. Audio Out Levelling affects both the Audio Out Optical and HDMI ARC sound signals. For 5362 series Problems with HTS sound Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.
HDMI CEC. 4.8 Headphones You can connect a set of headphones to the connection on the back of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. For 5362 series For 5362 series Y Pb Pr - Component Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV. To adjust the volume… 1 - Press , select Sound > Headphones volume and press OK. 2 - Press the arrows (up) or (down) to adjust the value.
CVBS - Audio L R Installation CVBS - Composite Video is a high quality connection. Next to the CVBS signal adds the Audio Left and Right signals for sound. Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. • Y shares the same jack with CVBS. • Component and Composite share audio jacks. 1 - Connect the USB Hard Drive to one of the USB connections on the TV.
Warning The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
To disconnect the USB flash drive, you can pull out the flash drive anytime. Connect USB mouse For more information on watching or playing content from a USB flash drive, in Help, press the colour key Keywords and look up Photos, videos and music. You can connect a USB mouse (USB-HID type) to navigate pages on the Internet. On an Internet page, you can select and click on links more easily. Connect the mouse 4.14 Switch the TV on and connect the USB mouse to one of the USB connections on the TV.
4.16 Computer Connect You can connect your computer to the TV and use the TV as a PC monitor. With HDMI Use an HDMI cable to connect the computer to the TV. Ideal setting If you connect a computer, we advice you to give the connection, on which the computer is connected, the correct device type name in the Source menu. If you then switch to Computer in the Source menu, the TV is set to the ideal Computer setting automatically.
5 5.2 Switching On and Off Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To open the basic menu… 5.1 1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel or Sources. Select Demo, to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel.
5.4 Switch off timer If the TV receives a TV signal but you don't press a key on the remote control during a 4 hour period, the TV switches off automatically to save energy. Also, if the TV does not receive a TV signal nor a remote control command for 10 minutes, the TV switches off automatically. If you use the TV as a monitor or use a digital receiver to watch TV (a Set-Top Box - STB) and you do not use the remote control of the TV, you should deactivate this automatic switch off.
6 Remote control 6.1 Key overview Top 1 - Home To open the Home menu. 2 - SMART TV To open the Smart TV start page. 3 - Colour keys Direct selection of options. Blue key , opens Help. 1 - Standby / On To switch the TV on or back to Standby. 4 - INFO To open or close programme info. 2 - Playback and Record • Play , to playback.
6.3 Batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control. 1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.
4 - The selected channel is marked with a . 5 - To finish, press BACK . The channels are added to the Favourites list. 7 Channels To remove a channel from the favourites list, select the channel with , then press again to unmark as favourite. 7.1 Install Channels Reorder For more information, in Help, press the colour key Keywords and look up Channel, Antenna installation or Channel, Cable installation. You can reorder — reposition — channels in the Favourite channel list.
• To delete the character in front of the cursor, press Backspace . • To enter a character, select the character with the arrow keys and press OK. • To select uppercase characters, press . • To select numbers or special characters, press . • When you are ready, press BACK to close the on-screen keyboard. • To finish renaming, select Done and press OK. 6 - Press (left) to go back one step or press BACK to close the menu. 7.
show the subtitles you selected. Universal access In Help, press Keywords and look up access for more information. To set the primary and secondary subtitle language… Universal 1 - Press , select General settings > Languages > Primary subtitles or Secondary subtitles. 2 - Select the language you need and press OK. 3 - Press (left) to go back one step or press BACK to close the menu.
4 - Press (left) to go back one step or press BACK to close the menu. Dual I-II If an audio signal contains two audio languages but one language or both has no language indication, this option is available. Status Select Status to view technical information on the channel (if it is analogue or digital) or a connected device you are watching. Common Interface If you installed a CAM in one of the Common Interface slots, you can view the CAM and operator information or do some CAM related settings.
• Reveal To unhide hidden information on a page. • Cycle subpages To cycle subpages when these are available. • Language To switch the group of characters that Text uses to display correctly. • Text 2.5 To activate the Text 2.5 for more colours and better graphics. information. What you need Interactive TV is only available on digital TV channels. To enjoy the full benefits of Interactive TV, you need a high-speed (broadband) Internet connection to the TV.
About interactive TV With interactive TV, some digital broadcasters combine their normal TV programme with information or entertainment pages. Note: • You cannot download files to your TV with this feature. • Not all TV programmes, commercials and features include closed captioning information. • You cannot respond to the digital content. Visit the broadcaster's Internet website for more information.
Internet or vice versa. The TV might have switched to From the Internet automatically. To make the recordings available in the list of recordings, switch to the setting that was selected when the recordings were made. 8 TV Guide 8.1 What you need 8.3 With the TV Guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
3 - Select Change day, select Previous day, Today or Next day and press OK. 4 - Press BACK to close the menu. Set a reminder You can set reminders that alert you of the start of a programme with a message on screen. • To set a reminder, select the programme in the schedule and press for Set reminder. The programme is marked with a clock. • To cancel the reminder, press the for Clear reminder. • To view a list of all reminders you have set, press OPTIONS, and select All reminders.
1 - To schedule a recording, press TV Guide . On the TV guide page, select the channel and programme you wish to record. You can enter the channel number to jump to the channel in the list. Press (Right) or (Left) to scroll through the programmes of a channel. To change the date of the list, press OPTIONS and select Change day. In the list, select the day you want and press OK. If the TV guide comes from the Internet, you can select the date at the top of the page and press OK.
• You can record the digital (DVB) subtitles of channel. You cannot record subtitles that come from Text services. To check if digital (DVB) subtitles are available, tune to the TV channel and press OPTIONS , select Subtitle language to open the list of Subtitles. You can only record a subtitle language preceded by a DVB icon. The moment you switch to a digital channel, the USB Hard Drive starts buffering the broadcast.
10 Home menu 10.1 About the Home menu Channels This row contains all channles. Sources This row contains available sources in this TV. Utilities This row contains TV functions which are available for user. Quick settings This row contains settings which are available for user. 10.2 Open the Home menu To open the Home menu and open an item… 1 - Press Home . 2 - Select an item and press OK to open or start it. 3 - Press BACK to close the Home menu without starting anything.
11 Utilities Smart TV Open Smart TV page. TV guide For more information, in Help, press the colour key Keywords and look up TV guide. Recording For more information, in Help, press the colour key Keywords and look up Recording. Channel View channel list. Update software For more information, in Help, press the colour key Keywords and look up Update software. Demo Me View Demo Me for demo on this TV. Help Open Help page.
12 Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
13 13.3 Sources Scan connections 13.1 To rescan connections and update the Sources menu, press Scan connections. (if key is available on the bottom of the screen.) Switch to a device From the list of Sources, you can switch to any of the connected devices. You can switch to a tuner to watch TV, open the content of a connected USB Flash Drive or see the recordings you made on a connected USB Hard Drive.
14 the computer. Videos, photos and music The menu bar 14.1 Navigate to the menu bar and select the type of file you want to watch or play. Select Photos , Music or Movie or Videos . Alternatively, you can open the Folders view and browse your folders to look for a file. From a USB connection Sorting To browse your photos by date, month, year or alphabetically by name, press Sort . To browse your music by album, artist, genre or alphabetically by name, press Sort .
14.5 14.6 View your photos Play your music View photos Play music To view photos, select Photos in the menu bar, select a photo thumbnail and press OK. If there are several photos in the same folder, select a photo and press Slide show to start a slide show of all photos in this folder. To jump to the next or previous photo, press + or - . To stop the slide show or close the photo, press (Stop). To view info on a photo (size, creation date, file path, etc.), select a photo and press INFO .
15 Wi-Fi. Smartphones and tablets For more information on Wi-Fi CERTIFIED Miracast™ go to www.wi-fi.org Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance. 15.1 Philips TV Remote App Switch on Miracast The new Philips TV Remote App on your smartphone or tablet is your new TV buddy. Make sure Wi-Fi Miracast is switched on. With the TV Remote App, you master your media around you.
The MHL connection is ideal for watching movies or playing games from your mobile device on TV for a longer time. From the TV To stop watching the screen of the device on TV, you can . . . Charging • press EXIT to watch a TV broadcast • press Home to start another activity on TV • press SOURCES to open the Sources menu and select a connected device. With the MHL cable connected, your device will charge while the TV is switched on (not in standby).
Tip Smart TV start page To enter text or to navigate an Internet page more easily, you can consider to connect a USB keyboard and a USB mouse to the TV. For more information, press Keywords and look up USB keyboard or USB mouse. 1234567- Now on your TV Your Apps App gallery Internet Recommended Apps Search Colour keys for control Setup Smart TV Your Apps The first time you open Smart TV, you need to configure your connection. Read and agree to the terms and conditions to continue.
1 - Press Home > Utilities > Smart TV . 2 - On the start page, select an App icon and press OK. In an App, press BACK to go back 1 step or page. try the World Wide Web and surf the Internet on TV. Close an App With the video store Apps in Smart TV, you can rent your favourite movie from an online rental video store. You can pay securely with your credit card. Rental video Apps To close an App and return to the Smart TV start page, press Smart TV .
Multi View While you are on a Smart TV App or the Internet, you can watch the current TV channel. Multi view opens a small screen for the TV channel next to the Smart TV screen. To open Multi view… 1 - Press SMART TV to open Smart TV. 2 - Open an app. 3 - Press MULTI VIEW to open the small screen. 4 - Press + or – to change the TV channel in the small screen. Reset Smart TV To reset your connection with Smart TV, clear the Internet memory on the TV.
16 Receive a TV channel Multi room With Multi room, you can watch the current TV channel or open the channel list of the server TV. If you select a channel from the list, the other TV will also switch to the channel you selected. If the server TV has a build-in satellite tuner with installed channels or a connected Hard Disc Drive (HDD) with recordings*, you can also watch these on this TV. You cannot switch channels while the server TV is recording or in Pause TV mode. 16.
17 Clock Settings Display clock on the right-top corner TV screen. 17.1 Quick settings Sleep timer Enter Quick settings menu For more information, in Help, press the colour key Keywords and look up Sleep timer. Press SETUP key on the remote control to find frequently used settings in Quick settings menu. 17.2 Picture Eco settings Picture style For more information, in Help, press the colour key Keywords and look up Eco settings.
3 - Press the colour key Restore style , and press OK. The style is restored. 4 - Press (left) repeatedly if necessary, to close the menu. 2 - Select Sharpness and press (right). 3 - Press the arrows (up) or (down) to adjust the value. 4 - Press (left) repeatedly if necessary, to close the menu. Home or Shop Advanced picture settings If the Picture style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. A setting meant for in-store promotion.
1 - Press , select Picture and press (right) to enter the menu. 2 - Select Advanced > Colour > Colour temperature and press OK. 3 - Select Normal, Warm or Cool. Or select Custom if you want to customise a colour temperature yourself. 4 - Press (left) repeatedly if necessary, to close the menu. contrast and press OK. 3 - Select Maximum, Medium, Minimum or Off. 4 - Press (left) repeatedly if necessary, to close the menu.
To select one of the basic settings to fill the screen… Sharpness settings 1 - Press , select Picture and press (right) to enter the menu. 2 - Select Picture format and press (right). 3 - Select Fill screen, Fit to screen or Wide screen, and press OK. 4 - Press BACK to close the menu. Super resolution With Super Resolution, you switch on a superior sharpness in line edges and contours. To switch on or off… 1 - Press . 2 - Select Picture and press (right) to enter the menu.
enter the menu. 2 - Select Bass and press (right). 3 - Press the arrows (up) or (down) to adjust the value. 4 - Press (left) repeatedly if necessary, to close the menu. 17.3 Sound Sound style Select a style For easy sound adjustment, you can select a preset setting with Sound Style. Treble 1 - While watching a TV channel, press . 2 - Select Sound and press (right) to enter the menu. 3 - Select Sound style, and select one of the styles in the list.
TV speakers Audio out format You can send the TV sound to a connected audio device - a Home Theatre System or audio system. For more information, in Help, press the colour key Keywords and look up Audio out format. You can select where you want to hear the TV sound and how you want to control it. • If you select TV speakers > Off, you permanently switch off the TV speakers. • If you select TV speakers > On, the TV speakers are always on.
the value. 4 - Press (left) repeatedly if necessary, to close the menu. Switch off timer If the TV receives a TV signal but you don't press a key on the remote control during a 4 hour period, the TV switches off automatically to save energy. Also, if the TV does not receive a TV signal nor a remote control command for 10 minutes, the TV switches off automatically. TV placement As part of the first installation, this setting is set to either On a TV stand or On the wall.
EasyLink Home or Shop EasyLink If the TV is installed in a shop, you can set the TV to display an in store promotion banner. Picture style is set to Vivid automatically. Switch off timer is switched off. To switch off EasyLink completely… 1 - Press , select General settings and press (right) to enter the menu. 2 - Select EasyLink, press (right) and select EasyLink one step further. 3 - Select Off. 4 - Press (left) repeatedly if necessary, to close the menu.
HbbTV CAM settings If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages. Switch on operator profile To switch on operator profile for CI+/CAM for easy channel installation and updates... 1 - Press , select General settings and press (right) to enter the menu. 2 - Select HbbTV, and press OK. 3 - Select On or Off. 4 - Press (left) repeatedly if necessary, to close the menu. 1 - Press , select General settings and press (right) to enter the menu.
The new code is set. To select an audio language when none of your preferred audio language is available… Forgotten your Child Lock PIN code? 1 - Press OPTIONS . 2 - Select Audio language and select on the audio language you want temporarily. If you forgot your PIN code, you can override the current code and enter a new code. 1 - Press , select Child lock and press (right) to enter the menu. 2 - Select Change code and press OK. 3 - Enter the overriding code 8888.
1 - Press , select the device and press OK. 2 - While watching a channel on the device, press OPTIONS , select Show device keys and select the key and press OK. 3 - Press BACK to hide the device keys. 4 - To close Text, press BACK again. available. To know if a channel is analogue or digital, switch to the channel and open Channel Info in OPTIONS.
1 - Press TEXT. 2 - With Text/Teletext open on screen, press OPTIONS. 3 - Select Text 2.5 > Off. 4 - Press (left) repeatedly if necessary, to close the menu. Manual time offset To adjust time offset… 1 - Press , select General settings > Clock > Manual time offset, and press OK. 2 - Press the arrows (up) or (down) to adjust the value. 3 - Press (left) repeatedly if necessary, to close the menu. Clock Date and time Automatic 17.
1 - Press , select Universal access and press (right) to enter the menu. 2 - Select Audio Description > Speakers/Headphones and press OK. 3 - Select Speakers, Headphones or Speakers + Headphones and press OK. 4 - Press (left) repeatedly if necessary, to close the menu. 1 - While watching a TV channel, press OPTIONS , select Universal access and press OK. 2 - Select Hearing impaired, and select On.
18 Networks For more information, in Help, press the colour key Keywords and look up Network, for more information on connecting the TV to a network.
3456- 19 Channel installation Select Select Select Press Search for channels and press OK. Start now and press OK. Update channels and press OK. BACK to close the menu. 19.1 Antenna/cable installation Reinstall channels Update channels Reinstall all channels Automatic channel update You can reinstall all channels and leave all other TV settings untouched. If you receive digital channels, you can set the TV to automatically update the list with new channels.
automatic. If your DVB-C operator gave you specific DVB-C values, the network ID or network frequency, enter these values when the TV asks for them during installation. If this results in having no channels installed or if some channels are missing, you can select the extended Full scan method. This method will take more time to search for and install channels. Channel Number Conflicts Frequency step size In some countries, different TV channels (broadcasters) might have the same channel number.
frequency, position the arrows on a number with and and change the number with and . To check the frequency, select Search and press OK. 19.2 Channel list copy Introduction If you use DVB-C to receive channels, the option Symbol rate mode is available. For Symbol rate mode, select Automatic, unless your cable provider gave you a specific symbol rate value. To enter the symbol rate value, use the number keys. Channel List Copy is intended for dealers and expert users.
Channel list version Check the current version of the channel list... 1 - Press , select General settings > Channel list copy and press OK. 2 - Select Current version, then press OK. 3 - Press (left) repeatedly if necessary, to close the menu. Upload a channel list To not installed TVs Depending on whether your TV is already installed or not, you must use a different method to upload a channel list.
The TV switches itself off for 10 seconds and then back on again. Please wait. 20 Software Do not . . . • use the remote control • remove the USB memory device from the TV 20.1 Update software If a power cut occurs during the update, never remove the USB memory device from the TV. When the power returns, the update will continue. At the end of the update, the message Operation successful appears on screen. Remove the USB memory device and press on the remote control.
3 - Press (left) repeatedly if necessary, to close the menu. Source: http://freetype.sourceforge.net zlib (1.2.3) The 'zlib' compression library provides in-memory compression and decompression functions, including integrity checks of the uncompressed data. This piece of software is made available under the terms and conditions of the zlib license, which can be found below. Source: http://www.zlib.net/ 20.5 Open source software This television contains open source software. TP Vision Europe B.V.
HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos4), file transfer resume, http proxy tunneling and more! This piece of software is made available under the terms and conditions of the Libcurl license, which can be found below. Source: http://curl.haxx.
terms and conditions of the mtd-utils license, which can be found below. Source: http://www.linuxmtd.infradead.org/index.html This piece of software is made available under the terms and conditions of the ntfsprogs license, which can be found below. Source: http://sourceforge.net/projects/linux-ntfs libusb (1.0.6) This is the home of libusb, a library that gives user level applications uniform access to USB devices across many different operating systems.
lvm2 (2.02.89) DM_VERITY. This piece of software is made available under the terms and conditions of the lvm2 license, which can be found below. Source: ftp://sources.redhat.com/pub/lvm2/releases/ wherever certain patterns appear, or extract data from parts of certain lines while discarding the rest. To write a program to do this in a language such as C or Pascal is a time-consuming inconvenience that may take many lines of code. The job is easy with awk, especially the GNU implementation: gawk.
The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill. Source: http://procps.sourceforge.net/index.html GNU Wget is a free software package for retrieving files using HTTP, HTTPS and FTP, the most widelyused Internet protocols. It is a non-interactive commandline tool, so it may easily be called from scripts,?cron?jobs, terminals without X-Windows support, etc. Source: http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz psmisc (22.
a specific construction for calculating a message authentication code (MAC) involving a cryptographic hash function in combination with a secret cryptographic key. As with any MAC, it may be used to simultaneously verify both the data integrity and the authentication of a message. Any cryptographic hash function, such as MD5 or SHA-1, may be used in the calculation of an HMAC; the resulting MAC algorithm is termed HMAC-MD5 or HMAC-SHA1 accordingly. Source: http://www.deadhat.com/wlancrypto/hmac_sha1.
terms and conditions of the libmng license, which can be found below. Source: http://sourceforge.net/projects/libmng/files/ Source: http://expat.sourceforge.net/ DirectFB include SAWMAN (1.4.
GNU C library is used as the C library in the GNU system and most systems with the Linux kernel This piece of software is made available under the terms and conditions of the glibc license, which can be found below. Source: http://www.gnu.org/software/libc/ This piece of software is made available under the terms and conditions of the NTFS-3G Read/Write Driver license, which can be found below. Source: http://www.tuxera.com WPA Supplicant (0.5.10 & 0.6.7) These packages are used to provide WiFi access.
found below. Source: http://qt.nokia.com/ coreutils (6.9) The GNU Core Utilities are the basic file, shell and text manipulation utilities of the GNU operating system. These are the core utilities which are expected to exist on every operating system. Source: http://www.gnu.org/software/coreutils/ e2fsprogs (1.41.14) e2fsprogs provides the filesystem utilities for use with the ext2 filesystem, it also supports the ext3 and ext4 filesystems.
emulation of curses in System V Release 4.0, and more. It uses Terminfo format, supports pads and color and multiple highlights and forms characters and functionkey mapping, and has all the other SYSV-curses enhancements over BSD Curses. Source: http://www.gnu.org/software/ncurses/ The "libxml2" library is used in AstroTV as a support for the execution of NCL application. This library was developed for the GNOME software suite and is available under a "MIT" license. Source: http://www.xmlsoft.
and conditions of the LGPL v2.1 license Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro httpd-0.9.9.tar.gz The mDNSResponder project is a component of Bonjour, Apple's ease-of-use IP networking initiative: In our project, Bonjour is used for the automatic discovery of devices and services Source: http://developer.apple.com/bonjour/ yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. 21 Specifications 21.1 Environmental Please inform yourself about the local separate collection system for electrical and electronic products. European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
21.3 - Weight ± 11.02 kg Reception 49PFx5301 • without TV stand: Width 1099.2 mm - Height 645.4 mm - Depth 81.2 mm - Weight ± 11.12 kg • with TV stand: Width 1099.2 mm - Height 695.9 mm - Depth 258.9 mm - Weight ± 13.
– Formats : SAMI, SubRip (SRT), SubViewer (SUB), MicroDVD (TXT), mplayer2 (TXT), TMPlayer (TXT) – Character encodings : UTF-8, Central Europe and Eastern Europe (Windows-1250), Cyrillic (Windows-1251), Greek (Windows-1253), Turkish (Windows-1254), Western Europe (Windows-1252) • Image Codecs : JPEG • Limitations : – Maximum supported total bit rate for a media file is 30Mbps. – Maximum supported video bit rate for a media file is 20Mbps. – MPEG-4 AVC (H.264) is supported up to High Profile @ L4.1.
creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 22 Help and support TV does not respond to the remote control 22.1 The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behaviour. If the TV continues to be unresponsive to the remote control, you can check if the remote control is working by means of a mobile phone camera.
• Make sure that the volume is not muted or set to zero. • Make sure that the TV audio output is connected to the audio input on the Home Theatre System. Sound should be heard from the HTS speakers. • Some devices may require you to manually enable HDMI audio output. If HDMI audio is already enabled, but you still do not hear audio, try changing the digital audio format of the device to PCM (Pulse Code Modulation). Refer to the documentation accompanying your device for instructions.
Internet does not work • If the connection to the router is OK, check the router connection to the Internet. number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. The PC and Internet connection are slow • Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality. • Use a high-speed (broadband) Internet connection for your router.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 23 Safety and care 23.1 Risk of injury to children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 23.2 Screen care • Never touch, push, rub or strike the screen with any object.
CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design), 2010/30/ EU (Energy Labelling) and 2011/65/EC (RoHS). 24 Terms of use 2016 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product.
25 Copyrights 25.1 25.5 MHL DTVi MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. The DTVi brand and logo are registered marks of Pontifical Catholic University of Rio de Janeiro (PUCRio) and the Federal University of Paraíba (UFPB). 25.6 Java Java and all Java based trademarks are registered trademarks of Oracle and/or its affiliates, in the United States and other countries. 25.2 HDMI 25.
25.8 Wi-Fi Alliance Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 25.9 Kensington Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. 25.
26 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index Computer, connect 22 Connectivity Guide 10 Consumer Care 84 Contact Philips 84 Contrast 50 Contrast, Contrast Mode 51 Contrast, Dynamic Contrast 51 Contrast, Gamma 51 Contrast, Video Contrast 51 A Age Rating 28 Antenna connection 6 Antenna, Manual Installation 65 App gallery 46 Audio commentary 61 Audio Description 61 Audio Language 29 Audio Language, Primary 29 Audio Language, Secondary 29 Audio Out - Optical, tips 13 Audio Out Delay 16 Audio Out Format 16 Audio Out Levelling 16 Audio Out Offset 16
MPEG Artefact Reduction 52 Screen care 86 Sharpness 50 Sharpness, MPEG Artefact Reduction 52 Sharpness, Noise reduction 52 Sharpness, Super Resolution 52 Sleep Timer 23 Smart Card, CAM 13 Smart TV 44 Software, Update 67 Sound Style 53 Sound, Auto Volume Levelling 53 Sound, Bass 53 Sound, Clear Sound 54 Sound, Headphones Volume 54 Sound, surround mode 53 Sound, Treble 53 Subtitle 29 Subtitle Language 29 Subtitle Language, Primary 29 Subtitle Language, Secondary 29 Support, online 84 Surround Mode 53 Switch
Powered by TCPDF (www.tcpdf.
