Register your product and get support at 6452 series www.philips.
Contents 1 What's new 8.6 Storage 4 2 Setting Up 9 Internet 4 1.1 All-in-one source menu 1.2 Top picks 4 1.3 Media browser 5 10 TV Menu 2.1 Read Safety 6 2.2 TV Stand and Wall Mounting 2.3 Tips on Placement 6 2.4 Power Cable 6 2.5 Antenna Cable 7 2.6 Satellite Dish 7 11 Sources 12 Settings 12 13 6 Connect Devices 15 49 61 66 13.1 From a USB Connection 66 13.2 From a Computer or NAS 66 13.3 From a Cloud Storage Service 66 13.4 Favourites, Most Popular, Last Played menu 25 66 13.
21 Multi View 80 21.1 Text and TV 80 21.2 HDMI and TV 80 21.3 Nettv and TV 80 21.4 Nettv and HDMI 80 22 Software 81 22.1 Update Software 81 22.2 Software Version 81 22.3 Open Source Software 81 22.4 Open Source License 81 22.5 Announcements 109 23 Specifications 110 23.1 Environmental 110 23.2 Power 110 23.3 Operating System 110 23.4 Reception 111 23.5 Display Input Resolution 23.6 Dimensions and Weights 23.7 Connectivity 111 23.8 Sound 111 23.9 Multimedia 112 24 Help and Support 111 111 113 24.
1 What's new 1.1 All-in-one source menu About All-in-one source menu For the first time you press SOURCES, you can see instructions how to set your source menu. The improved source menu contains normal source menu, easily open TV Guide, and also you can use (plus key) to set a reminder or schedule a recording in TV Guide. Improved TV guide A clear and better looking TV guide. Select a programme and read the programme info or press to set a reminder or schedule a recording.
4 - When playing, there is a secondary control bar on the bottom of the screen, use the arrows and OK key to select what you want. Select to mark as favourites 1.3 Media browser Browse your media as you like it or mark any channel, song or photo as a favourite easily. 1 - Press (plus key) to mark any video, song or photo as a favourite. 2 - You can view videos, songs, and photos in grid view or list view.
VESA MIS-F 400x200, M6 • 55PUS6432, 55PUS6452 VESA MIS-F 400x200, M6 2 Setting Up Preparation 2.1 First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV. Read Safety Read the safety instructions first before you use the TV. Caution For more information, in Help, select Keywords and look up Safety Instructions.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. 2.5 Antenna Cable Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals. 2.
3 Middle Remote Control 3.1 Key Overview Top 1 - OK key To confirm a selection or setting. 2 - Arrow / navigation keys To navigate up, down, left or right. 3 - BACK To switch back to the previous channel you selected. To return to previous menu. To go back to the previous App/Internet page. 1 - Standby / On To switch the TV on or back to Standby. 4 - OPTIONS To open or close the Options menu. 2 - AMBILIGHT To select one of the Ambilight style. 5 - HOME To open the Home menu.
5 - Playback and Record • Play , to playback. • Pause , to pause playback • Stop , to stop playback • Rewind , to rewind • Fast forward , to go fast forward • Record , to start recording or tablet, then your Android TV will show a code on the screen. 5 - Enter the code on your Android smartphone or tablet to pair to your Android TV. *You need an Android phone or tablet running Android 4.3 or higher to use the Android TV Remote Control app. 6- To open the Netflix App directly.
3.3 moment. Using Remote Control Keyboard * Your remote control has a Qwerty / Azerty or a Qwerty / Cyrillic keyboard, depending on your region. Writing Text Overview - Qwerty and Cyrillic With the keyboard on the back of the remote control, you can write text in any text field on screen. Overview of a Qwerty/Cyrillic keyboard.* To write text… 1 - Select a text field if it is not yet selected. 2 - Turn the remote control keyboard facing upwards to activate the keyboard keys.
3.4 IR Sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. Warning Do not put any objects in front of IR sensor of the TV, it may block the IR signal. 3.5 Batteries Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty.
movie. 4 - The menu will disappear automatically. 4 Switching On and Off To switch the TV on standby, select and press the joystick key. 4.1 On or Standby Make sure the TV is connected to the mains AC power. Connect the supplied power cord to the AC in connector at the back of the TV. The indicator light at the bottom of the TV lights up. Switch on Press on the remote control to switch the TV on. Alternatively, press HOME.
5 Satellite Installation Settings Channels The satellite installation settings are preset according your country. These settings determine how the TV searches and installs satellites and its channels. You can always change these settings. 5.1 Satellite Installation To change the satellite installation settings… About Installing Satellites 1 - Start the satellite installation. 2 - On the screen where you can start searching for satellites, select Settings and press OK.
Unicable Setup Add a Satellite The Unicable System You can add an additional satellite to your current satellite installation. The installed satellites and their channels remain untouched. Some satellite operators do not allow adding a satellite. You can use a Single Cable system, MDU or Unicable system to connect the antenna dish to the TV. A Single Cable system uses one cable to connect the satellite dish to all satellite tuners in its system.
Manual Installation Problems Manual Installation is intended for expert users. The TV cannot find the satellites I want or the TV You can use Manual Installation to quickly add new channels from a satellite transponder. You need to know the frequency and polarization of the transponder. The TV will install all channels of that transponder. If the transponder was installed before, all its channels - the former and the new ones - are moved to the end of the channel list All.
Update Channels Reinstall All Channels Automatic Channel Update You can reinstall all channels and leave all other TV settings untouched. If you receive digital channels, you can set the TV to automatically update these channels. If a PIN code is set, you will need to enter this code before you can reinstall channels. Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the Channels List and are marked with a . Channels without a signal are removed.
signal quality of this frequency. The test result is shown on screen. You can reposition the antenna or check the connections to possibly improve the reception. 7 - You can also change the frequency yourself. Select the frequency number one by one and use the (up) or (down) keys to change the value. Select Search and press OK to test the reception again. 8 - Press (left) repeatedly if necessary, to close the menu. Frequency Scan Select the method of searching for channels.
the Child Lock PIN code to copy the channel list. 6 - When copying is done, unplug the USB flash drive. 7 - Press (left) repeatedly if necessary, to close the menu. done, continue with step 2. 2 - Plug in the USB flash drive that holds the channel list of the other TV. 3 - To start the channel list upload, press , select All Settings and press OK. 4 - Select Channels > Channel List Copy > Copy to TV. Enter your PIN code if necessary.
1 - Press . 2 - Press OK to open the current channel list. 3 - Select at the upper right corner and press OK. 4 - Select Search Channel and press OK to open a text field.You can use the remote control keyboard (if available) or the onscreen keyboard to enter text. 5 - Enter a number, a name or part of a name and select Apply and press OK. The TV will search for matching channel names in the list you selected.
To unlock a channel… Rename Channel 1 - Press . 2 - Press OK to open the channel list. If necessary change the channel list. 3 - Select at the upper right corner and press OK. 4 - Select Lock/UnLock and press OK. 5 - Enter your 4 digit PIN code if the TV asks for it. 6 - Press (left) to go back one step or press BACK to close the menu. While watching a channel, you can rename channel. To rename a channel… 1 - While watching a channel, press OPTIONS. 2 - Select Preferences > Rename Channel.
4 - While watching a channel, press OPTIONS. 5 - Select Preferences > Map Channel. 6 - Select one item in the list and press OK. 7 - Select Map Channel. 8 - Once completed, you will see the mapped channel information in the programme. press OK. 3 - Select Channel Info and press OK. 4 - To close this screen, press OK. Programme Info View programme details To call up the details of the selected programme… Change Logo 1 - Tune to the channel. 2 - Press OPTIONS, select Preferences and press OK.
the last channel of the range you want to add and then press OK. 6 - To finish adding channels, press BACK. 7 - The TV will ask to rename the Favourites List. You can use the on-screen keyboard or press BACK to hide the on-screen keyboard, then use the keyboard on the back of the remote control (if available) to enter new name. marked at the left. Rename a Favourites List You can only rename a Favourites List. To rename a Favourites List… 1 - Press SOURCE. 2 - Select Favourites.
3 - Press BACK to hide the device keys. 4 - To close Text, press BACK again. Text / Teletext Digital Text (UK only) Text Pages To open Text/Teletext press TEXT, while you are watching TV channels. To close Text, press TEXT again. Some digital broadcasters offer dedicated Digital Text or interactive TV on their digital TV channels. This includes normal Text using the number, colour and arrow keys to select and navigate. Select a Text page To close Digital Text, press BACK. To select a page . . .
To switch off Text 2.5… 1 - Press TEXT. 2 - With Text/Teletext open on screen, press OPTIONS. 3 - Select Text 2.5 > Off and press OK. 4 - Press (left) repeatedly if necessary, to close the menu.
6 6.2 Connect Devices HDMI Ports 6.1 HDMI Quality About Connections An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for TV signal. Connectivity Guide For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m. Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
the TV and the connected device. HDMI MHL With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection. With HDMI MHL, you can send what you see on your Android smartphone or tablet to a TV screen. The HDMI 4 connection on this TV incorporates MHL 2.0 (Mobile High-Definition Link).
Copy Protection DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management). 6.3 Y Pb Pr - Component Y Pb Pr - Component Video is a high quality connection. The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound. 6.
When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card. CI+ This TV is ready for the CI+ Conditional Access . With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module.
Problems with HTS sound Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing. You can fix this by setting the Audio Out Format of the TV to Stereo (uncompressed). Press for All Settings > Sound > Format.
What You Need You can connect a wireless device with Bluetooth® to this TV – a wireless speaker, a subwoofer, a sound bar or headphones. You can also connect a wireless gamepad with Bluetooth LE. To play the TV sound on a wireless speaker, you must pair the wireless speaker with the TV. You can pair some wireless speakers and a maximum of 4 Bluetooth LE (low energy) devices. The TV can only play the sound on one speaker at a time. If you connect a subwoofer, the sound is played on the TV and the subwoofer.
3 - Press (left) repeatedly if necessary, to close the menu. Select a Device Once a wireless Bluetooth speaker is paired, you can select it to play the TV sound. To select a speaker to play the TV sound… 1 - Press , select Speakers and press OK. 2 - Select the loudspeaker system you want. 3 - Press (left) repeatedly if necessary, to close the menu. Remove a Device You can connect or disconnect a wireless Bluetooth device.
6.14 Gamepad Connect a Gamepad To play games from the Internet on this TV, you can connect a selected range of wireless Gamepads. You can use Gamepads with a USB nano receiver or gamepads with Bluetooth. To connect a Gamepad with a USB nano receiver… 1 - Plug in the small nano receiver in one of the USB connections on the side of the TV. The wireless nano receiver comes with the Gamepad. 2 - If the Gamepad is switched on, you can use the Gamepad.
corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. Installation Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV.
Configure Install the keyboard To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. If you select a Cyrillic or Greek keyboard layout first, you can select a secondary Latin keyboard layout. To change the keyboard layout setting when a layout was selected… 1 - Press , select All Settings and press OK.
HDMI For best quality, use an HDMI cable to connect the camcorder to the TV. With DVI to HDMI Alternatively, you can use a DVI to HDMI adapter (sold separately) to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV. Audio Video LR / Scart You can use an HDMI, YPbPr or SCART connection to connect your camcorder.
Make sure Wi-Fi is switched on before you try to make the connection… 7 Connect your Android TV 1 - Press , select All Settings and press OK. 2 - Select Wireless and Networks and press (right). 3 - Select Wired or Wi-Fi > Wi-Fi On/Off. 4 - If it is switched off, select On and press O. 7.1 Network and Internet WPS Home Network If your router has WPS, you can directly connect to the router without scanning for networks.
Internet does not work • If the connection to the router is OK, check the router connection to the Internet. Network Settings View Network Settings The PC and Internet connection are slow • Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality. • Use a high-speed (broadband) Internet connection for your router. You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc.
4 - Enter the name with the remote control keyboard. 5 - To finish, select . 6 - Press (left) repeatedly if necessary, to close the menu. Switch on Wi-Fi connection You can switch on or off Wi-Fi connection on your TV. To switch on Wi-Fi… 1 - Press , select All Settings and press OK. 2 - Select Wireless and Networks and press (right) to enter the menu. 3 - Select Wired or Wi-Fi > Wi-Fi On/Off. 4 - Select On. 5 - Press (left) repeatedly if necessary, to close the menu.
Collection > App Gallery and press 3 - Select an app icon and press OK. 4 - Select Install and press OK. did not sign in during the first TV installation, you can always sign in later. To sign in after you did the TV installation… 1 - Press , select All Settings and press OK. 2 - Select Android Settings and press OK. 3 - Press (down) and select Personal > Add account and press OK. 4 - Press OK on SIGN IN.
information on these settings. Open the Home Menu To open these settings… 1234- To open the Home menu and open an item… Press , select All Settings and press OK. Select Android Settings. Explore the different Android settings. Press BACK if necessary, to close the menu. 1 - Press HOME. 2 - Select an item and press OK to open or start it. 3 - Press BACK to close the Home menu without starting anything. 7.
8 repeatedly or press EXIT. Apps Some Google Play products and features aren't available in all countries. 8.1 Find more information on support.google.com/androidtv About Apps You can find all installed apps in the Apps section of the Home menu. Music Like apps on your smartphone or tablet, the apps on your TV offer specific functions for an enriched TV experience. Apps like YouTube, games, video stores or weather forecasts (a.o.). You can use the Internet app to surf the Internet.
Games and press OK. 3 - Select a game to play or select a new game to install and press OK. 4 - When done, press BACK repeatedly or press EXIT or stop the app with its dedicated exit/stop button. Payments To make a payment on Google Play on TV, you must add a form of payment - a credit card (outside the United States) - to your Google Account. When you purchase a movie or TV show, you will be charged on this credit card.
For more information, in Help, select Keywords and look up Google Play Store for more information. 7 - Select Allowed apps and press OK. 8 - In the list of available apps, select an app and press OK to allow or not allow this app. 9 - Press BACK to go back one step or press EXIT to close the menu. Lock 18+ rated apps Now you can enter the restricted profile. You can lock 18+ rated apps from the Philips App Gallery. This setting controls the 18+ setting in the Philips App Gallery Privacy Settings.
running, you can force it to stop or you can clear the cache data. You can uninstall apps you downloaded. 5 - Press BACK to go back one step or press EXIT to close the menu. If you are using a USB Hard Drive to store apps, you can move the app from the USB Hard Drive to the TV memory or vice versa. 8.6 Storage You can see how much storage space - the internal TV memory - you are using for your apps, videos, music, etc. You can see how much free space you still have available for installing new apps.
9 Internet 9.1 Start Internet You can browse the Internet on your TV. You can view any Internet website but most of them are not prepared for a TV screen. • Some plug-ins (e.g. to view pages or videos) are not available on your TV. • You cannot send or download files. • Internet pages are shown one page at a time and full screen. To start the Internet browser… 1 - Press HOME. 2 - Scroll down and select Apps > Internet and press OK. 3 - Enter an Internet address and select , press OK.
10 TV Menu 10.1 About TV Menu If the TV cannot be connected with the Internet, you can use the TV Menu as your Home menu. In the TV Menu, you will find every TV function. 10.2 Open TV Menu To open TV Menu and open an item… 1 - Press to open TV Menu. 2 - Select an item and press OK to open or start it. 3 - Press BACK to close TV Menu without starting anything.
11 11.3 Sources Device Name and Type When you connect a new device to the TV and the TV detects the device, you can assign an icon that fits the device type. If you connect a device with an HDMI cable and HDMI CEC, the TV detects the device type automatically and the device gets an appropriate icon. 11.1 Switch to a device From the list of Sources, you can switch to any of the connected devices.
4 - Select On or Off. 5 - Press (left) repeatedly if necessary, to close the menu.
12 Customise a Style Settings Any picture setting you adjust, like Colour or Contrast, is stored in the currently selected Picture Style. It allows you to customise each style. Only the style Personal can save its settings for each source in the Sources menu. 12.1 Frequent Settings The most frequently used settings are bundled in the Frequent Settings menu. Restore a Style To open the menu… With a Picture Style selected, you can adjust any picture setting in All Settings > Picture… 1 - Press .
2 - Select Picture and press (right) to enter the menu. 3 - Select Advanced > Computer. 4 - Select On or Off. 5 - Press (left) repeatedly if necessary, to close the menu. Contrast With Contrast, you can adjust the contrast of the picture. To adjust the contrast… 1 - Press , select All Settings and press OK. 2 - Select Picture and press (right) to enter the menu. 3 - Select Contrast and press (right). 4 - Press the arrows (up) or (down) to adjust the value.
3 - Select Advanced > Colour > Custom Colour Temperature. 4 - Press the arrows (up) or (down) to adjust the value. WP is white point and BL is black level. You can also select one of the presets in this menu. 5 - Press (left) repeatedly if necessary, to close the menu. 3 - Select Advanced > Colour > Colour control. 4 - Select Saturation, and press (right). 5 - Press the arrows (up) or (down) to adjust the value. 6 - Press (left) repeatedly if necessary, to close the menu.
menu. 3 - Select Advanced > Sharpness > Ultra Resolution. 4 - Select On or Off. 5 - Press (left) repeatedly if necessary, to close the menu. Dynamic Contrast With Dynamic Contrast, you can set the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture. To adjust the level… 1 - Press , select All Settings and press OK. 2 - Select Picture and press (right) to enter the menu. 3 - Select Advanced > Contrast > Dynamic Contrast.
incoming picture. This is a 1:1 pixel on pixel format. Expert mode for HD and PC input. Picture Format Basic Quick Picture Setting If the picture is not filling the whole screen, if black bars are showing on the top or bottom or at both sides, you can adjust the picture to fill the screen completely. During the first installation, you did some picture settings in a few easy steps. You can redo these steps with Quick Picture Setting.
style Personal only. The Sound Style - Personal can save its settings for each individual source in Sources menu. the value. 5 - Press (left) repeatedly if necessary, to close the menu. To restore the style to its original setting… 1 - While watching a TV channel, press . 2 - Select Sound and press (right) to enter the menu. 3 - Select Sound Style , and select the Sound Style you want to restore. 4 - Select Restore Style. The style is restored.
2 - Select Sound and press (right) to enter the menu. 3 - Select Advanced > Audio Out Levelling. 4 - If the volume difference is large, select More. If the volume difference is small, select Less. 5 - Press (left) repeatedly if necessary, to close the menu. To switch on or off… 1 - Press , select All Settings and press OK. 2 - Select Sound and press (right) to enter the menu. 3 - Select Advanced and press (right) to enter the menu.
1 - Press , select All Settings and press OK. 2 - Select Sound and press (right) to enter the menu. 3 - Select Advanced and press (right) to enter the menu. 4 - Select Speakers and press (right) to enter the menu. 5 - Select On, Off, or EasyLink Autostart . 6 - Press (left) repeatedly if necessary, to close the menu. Advanced Ambilight Settings Wall Colour With Wall Colour, you can neutralise the influence of a coloured wall on the Ambilight colours.
To reset the ISF tuning… link button in the middle of the device. This will link the Hue Bridge with the TV. Do this within 30 seconds. The TV will confirm if a Hue Bridge is now linked to the TV. 4 - Select OK and press OK. 1 - Press , select All Settings and press OK. 2 - Select Ambilight and press (right) to enter the menu. 3 - Select Advanced > Reset ISF Settings. 4 - Press (left) repeatedly if necessary, to close the menu. With the Philips Hue bridge linked to the TV, go to page Hue bulbs.
4 - Select Off or On. 5 - Press (left) repeatedly if necessary, to close the menu. Reset Configuration To reset Ambilight+hue... 1 - Press , select All Settings and press OK. 2 - Select Ambilight and press (right) to enter the menu. 3 - Select Ambilight+hue > Reset Configuration. The configuration is reset. 4 - Press (left) repeatedly if necessary, to close the menu Immersion With Immersion, you can adjust how accurate the Hue bulbs follow the Ambilight. To adjust Ambilight+hue immersion...
1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select USB Keyboard Settings to start the keyboard setup. Switch Off Timer If the TV receives a TV signal but you don't press a key on the remote control during a 4 hour period, the TV switches off automatically to save energy. Also, if the TV does not receive a TV signal nor a remote control command for 10 minutes, the TV switches off automatically.
the menu. 4 - Change the settings according to your preference. 5 - Press (left) repeatedly if necessary, to close the menu. to HDMI 1 or HDMI 2 is distorted, connect the device to HDMI 3 or HDMI 4 on this TV. For more information, in Help, select Keywords and look up Problems, HDMI or Problems, HDMI Connection . EasyLink Advanced Settings EasyLink TV Guide To switch off EasyLink completely… The TV Guide receives information (data) from broadcasters or from the Internet.
HbbTV Menu Language If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages. To change the language of the TV menus and messages… 1 - Press , select All Settings and press OK. 2 - Select General Settings and press (right) to enter the menu. 3 - Select Advanced > HbbTV. 4 - Select On or Off. 5 - Press (left) repeatedly if necessary, to close the menu. 1 - Press , select All Settings and press OK.
If none of the preferred subtitle languages are available, you can select another subtitle language which is available. 1 - In Text, select the star in the top left corner of the screen to show the column of favourite pages. 2 - Press (down) or (up) to select a page number and press OK to open the page. You can clear the list with the option Clear favourite pages. To set the primary and secondary subtitle language… 1 - Press , select All Settings and press OK.
To activate the Text 2.5 for more colours and better graphics. Manual If none of the automatic settings display the time correctly, you can set the time manually. Text Setup However, if you schedule recordings from the TV Guide, we recommend not to change the time and date manually. In some countries, for some network operators, the clock settings are hidden to avoid an incorrect clock setting. Text language Some digital TV broadcasters have several Text languages available.
With Audio Description, a narrator's commentary is added to the normal audio. To switch on the commentary (if available)… 12.8 Universal Access To switch on Audio Description… Switch On 1 - Press , select All Settings and press OK. 2 - Select Universal Access and press (right) to enter the menu. 3 - Select Audio Description and press (right) to enter the menu. 4 - Select Audio Description one step further. 5 - Select On. 6 - Press (left) repeatedly if necessary, to close the menu.
12.9 Child Lock Parental Rating To set a minumum age to watch rated programmes... 1 - Press , select All Settings and press OK. 2 - Select Child Lock and press (right) to enter the menu. 3 - Select Parental Rating, and select one of the age in the list. 4 - Press (left) repeatedly if necessary, to close the menu. App Lock For more information, in Help, select Keywords and look up APP lock for more information.
4 - To stop playing videos, photos and music, press EXIT. 13 Videos, Photos and Music 13.3 From a Cloud Storage Service 13.1 You can view photos or play music and videos you uploaded on a storage service in the online cloud*. From a USB Connection With the Cloud Explorer app you can connect to Cloud Hosting Services. You can use your login and password to connect. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. 1 - Press HOME.
13.5 Play your Videos Control Bar To show or hide the control bar when a video is playing, press INFO* or OK.
4 - Play all music 5 - Shuffle: play your files in a random order 6 - Repeat: plays all music in this folder once or continuously * If INFO key is available on your remote control 68
Internet or vice versa. The TV might have switched to From the Internet automatically. To make the recordings available in the list of recordings, switch to the setting that was selected when the recordings were made. 14 TV Guide 14.1 What You Need 14.3 With the TV Guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
3 - Select Set Reminder and press OK. 4 - Press BACK to close the menu. To clear a reminder… 1 - Press TV GUIDE and select a programme with the reminder. 2 - Press OPTIONS. 3 - Select Clear Reminder and press OK. 4 - Press BACK to close the menu. Search by Genre If the information is available, you can look up scheduled programmes by genre like movies, sports, etc. To search for programmes by genre… 1 - Press TV GUIDE. 2 - Use navigation keys to select at the middle and press OK.
1 - Press TV GUIDE. 2 - Use navigation keys to select Now, and press OK. 3 - Select Now, Later, Tomorrow or the day you need, and press OK or BACK to close the menu. 4 - Select the programme you wish to record, press OPTIONS, select Record, and press OK. The programme is scheduled for recording. A warning will show automatically when overlapping recordings are scheduled.
For more information, in Help, select Keywords and look up USB Hard Drive, installation or Installation, USB Hard Drive. Manual Recording You can schedule a recording that is not linked to a TV programme. You set the tuner type, channel and the start and end time yourself. To schedule a recording manually… Pause a Programme 1 - Press SOURCES, and select Recordings. 2 - At the top of the screen, select Scheduled . 3 - Use navigation keys to select at the upper right corner, and press OK.
16 Cast to Your TV Smartphones and Tablets To cast an app to the TV screen… Philips TV Remote App 1 - On your smartphone or tablet, open an app that supports Google Cast. 2 - Tab the Google Cast icon. 3 - Select the TV you would like to cast to. 4 - Press play on your smartphone or tablet. What you selected should start playing on TV. The new Philips TV Remote App on your smartphone or tablet is your new TV buddy. 16.3 16.1 With the TV Remote App, you master your media around you.
17 Games 17.1 What You Need On this TV, you can play games… • from the App Gallery in the Home menu • from the Google Play Store in the Home menu • from a connected Game Console Games from the App Gallery or the Google Play Store must be downloaded and installed on TV before you can play them. Some games need a gamepad to play. To install game apps from the Philips App Gallery or the Google Play Store, the TV must be connected to the Internet.
• Rhytm - Based on audio dynamics • Party - A mix of all Follow Audio styles, one after the other 18 Ambilight 18.1 Follow Colour Ambilight Style You can set Ambilight to follow the video or the audio dynamics of a TV programme. Alternatively, you can set Ambilight to show a preset colour style or you can switch Ambilight off. Follow Video You can set Ambilight to follow the video or the audio dynamics of a TV programme.
18.3 Ambilight Settings For more information, in Help, select Keywords and look up Ambilight, Settings for more information.
19 Using Now on TV Top Picks To open Now on TV… 1 - Press TOP PICKS to open the Top Picks menu. 2 - Select Now on TV at the top of the screen and press OK. 3 - Select More to open TV guide. 19.1 About Top Picks With Top Picks your TV recommends… • current TV programmes in Now on TV • the latest rental videos in Video on Demand • online TV services (Catch Up TV) in TV on Demand When you open Now on TV, the TV may need a few seconds to refresh the page information. 19.
About Video on Demand With Video on Demand , you can rent movies from an online rental video store. You can let Video on Demand do some personalised recommendations of movies, based on your country, the TV installation and the programmes you watch regularly. The icon will only appear at the top of the screen when Video on Demand is available. Payment When you rent or buy a movie, you can pay the video store securely with your credit card.
20 Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. In your region, Netflix might only come available with future software updates. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
3 - Select Multi View: On on screen. The channel you were watching appears in the small screen. 4 - Press or to switch channels in the small screen. 21 Multi View 21.1 To hide the small screen, select Multi View: Off on screen. Text and TV Note: Not every Nettv app can support Multi View with a TV channel, if the app cannot support Multi View, then TV will show a message: Multi View is not supported. You can watch a TV channel in the small screen of Multi View when you're watching Text.
1 - Insert the USB flash drive into your computer. 2 - On the USB flash drive, locate the file update.htm and double click it. 3 - Click Send ID. 4 - If new software is available, download the .zip file. 5 - After the download, unzip the file and copy the file autorun.upg onto the USB flash drive. Do not place this file in a folder. 22 Software 22.1 Update Software Update from Internet Update the TV software 1 - Insert the USB flash drive into the TV again. The update starts automatically.
Software Foundation, but the instance of code that it refers to (the linux kernel) is copyrighted by me and others who actually wrote it. Also note that the only valid version of the GPL as far as the kernel is concerned is _this_ particular version of the license (ie v2, not v2.2 or v3.x or whatever), unless explicitly otherwise stated. Linus Torvalds" 22.4 Open Source License About Open Source License README for the source code of the parts of TP Vision Netherlands B.V.
Independent JPEG Group.----------------------The authors make NO WARRANTY or representation, either express or implied,with respect to this software, its quality, accuracy, merchantability, orfitness for a particular purpose. This software is provided "AS IS", and you,its user, assume the entire risk as to its quality and accuracy.This software is copyright (C) 1991-1998, Thomas G. Lane.All Rights Reserved except as specified below.
https://developer.facebook.com/docs/androidThis piece of software is made available under the terms and conditions of the Apache License version 2. TomCrypt (1.1) iwedia stack is using tomcrypt for sw decryptionThe original download site for this software is : http://man pages.ubuntu.com/manpages/saucy/man3/libtomcry pt.3.htmlThis piece of software is made available under the terms and conditions of the DO WHAT THE FUCK YOU WANT TO PUBLIC LICENSE ffmpeg (2.1.3) This TV uses FFmpeg.
strtod).The original download site for this software is : http://code.google.com/p/doubleconversionCopyright 2006-2011, the V8 project authors. All rights reserved.Redistribution and use in source and binary forms, with or withoutmodification, are permitted provided that the following conditions aremet: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Software and Document, your violation of the Terms of Use or infringement of any intellectual property or other right of any person or entity.11. The Terms of Use will be governed by and construed in accordance with the laws of Hong Kong.12. Any waiver of any provision of the Terms of Use will be effective only if in writing and signed by HKSARG or its representative.13.
Opera uses zlib as compression libraryThe original download site for this software is : http://zlib.netCopyright (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.
from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
Copyright (C) 1991, 1999 Free Software Foundation, Inc. which gives you legal permission to copy, distribute and/or modify the library. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA To protect each distributor, we want to make it very clear that there is no warranty for the free library.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
executables. ?d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not.
published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. notice shall be included NO WARRANTY THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, in all copies or substantial portions of the Software. EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF _______________________________ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
this definition, separable from, or merely link (or bind by name) to the interfaces of, "control" means (i) the power, direct or indirect, to cause the the Work and Derivative Works thereof.
Object form. (c) You must retain, in the Source form of any Derivative Works 3. Grant of Patent License.
modifications, or for any such Derivative Works as a whole, provided Your use, 8. Limitation of Liability. In no event and under no legal theory, reproduction, and distribution of the Work otherwise complies with whether in tort (including negligence), contract, or otherwise, the conditions stated in this License. unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be 5. Submission of Contributions.
your work. the file png.h that is included in the libpng distribution, the latter shall prevail. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: replaced with your own identifying information. (Don't include If you modify libpng you may insert additional notices immediately following the brackets!) The text should be enclosed in the appropriate this sentence.
risk of satisfactory quality, performance, accuracy, and effort is with Tim Wegner the user. The PNG Reference Library is supplied "AS IS". The Contributing Authors libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are and Group 42, Inc. disclaim all warranties, expressed or implied, Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are including, without limitation, the warranties of merchantability and of distributed according to the same disclaimer and license as libpng-0.
files "pngbar.png.jpg" and "pngbar.jpg (88x31) and "pngnow.png.jpg" (98x31). which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a documentation and makefiles, at the very least. certification mark of the Open Source Initiative.
""" this license, you must contact us to verify this. Portions of this software are copyright ? The FreeType The FreeType Project is copyright (C) 1996-2000 by David Turner, Project (www.freetype.org). All rights reserved. """ Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. Please replace with the value from the FreeType version you actually use.
copies of source Project, you indicate that you understand and accept all the terms files. of this license. o Redistribution in binary form must provide a disclaimer that ----------- states that the software is based in part of the work of the There are two mailing lists related to FreeType: FreeType Team, in the distribution documentation. We also o freetype@nongnu.
Covered Code available to a third party. conveyed herein. 1.1. "Contributor" means each entity that creates or contributes to 1.9. "Modifications" means any addition to or deletion from the the creation of Modifications. substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a 1.2.
appropriate decompression or de-archiving software is widely available Original Code (or portions thereof). for no charge. (c) the licenses granted in this Section 2.1(a) and (b) are 1.12. "You" (or "Your") means an individual or a legal entity effective on the date Initial Developer first distributes exercising rights under, and complying with all of the terms of, this Original Code under the terms of this License. License or a future version of this License issued under Section 6.1.
Contributor (or portions thereof); and 2) the combination of version of this License or the recipients' rights hereunder. However, You may include Modifications made by that Contributor with its Contributor an additional document offering the additional rights described in Version (or portions of such combination). Section 3.5. (c) the licenses granted in Sections 2.2(a) and 2.2(b) are 3.2. Availability of Source Code.
3.4. Intellectual Property Matters this License. (a) Third Party Claims. If Contributor has knowledge that a license under a third party's 3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source intellectual property rights is required to exercise the rights Code. If it is not possible to put such notice in a particular Source granted by such Contributor under Sections 2.1 or 2.
including a description of how and where You have fulfilled the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with obligations of Section 3.2. The notice must be conspicuously included the terms of this License to the maximum extent possible; and (b) in any notice in an Executable version, related documentation or describe the limitations and the code they affect.
only do in order to apply it to code which is not already Covered Code herein and fail to cure such breach within 30 days of becoming aware of the breach. All governed by this License), You must (a) rename Your license so that sublicenses to the Covered Code which are properly granted shall the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", survive any termination of this License.
(b) any software, hardware, or device, other than such Participant's LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER Contributor Version, directly or indirectly infringes any patent, then COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN any rights granted to You by such Participant under Sections 2.1(b) INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF and 2.
or an entity chartered or registered to do business in the United EXHIBIT A -Mozilla Public License. States of America, any litigation relating to this License shall be ``The contents of this file are subject to the Mozilla Public License subject to the jurisdiction of the Federal Courts of the Northern Version 1.1 (the "License"); you may not use this file except in District of California, with venue lying in Santa Clara County, compliance with the License.
version of this file under either the MPL or the [___] License." [NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.] 22.5 Announcements You can receive an announcement on new TV software available for download or other software related issues.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. 23 Specifications 23.1 Environmental Please inform yourself about the local separate collection system for electrical and electronic products. Product Fiche 32PFS6402 • Energy Efficiency Class : A • Visible Screen Size : 80 cm / 32 inch • On Mode Power Consumption (W) : 34 W • Annual Energy Consumption (kWh) * : 50 kWh • Standby Power Consumption (W) ** : 0.
23.3 23.6 Operating System Dimensions and Weights Android OS : 32PFS6402 • without TV stand: Width 726.5 mm - Height 438.7 mm - Depth 76.8 mm - Weight ± 5.63 kg • with TV stand: Width 726.5 mm - Height 483.3 mm - Depth 168.7 mm - Weight ± 5.89 kg Android Marshmallow 6.0 23.4 Reception 43PUS64x2 • without TV stand: Width 968.2 mm - Height 575.7 mm - Depth 76.8 mm - Weight ± 9.38 kg • with TV stand: Width 968.2 mm - Height 623.3 mm - Depth 204.2 mm - Weight ± 9.
23.8 Sound • wOOx • HD Stereo • Output power (RMS) : 20W • Dolby Digital Plus® • DTS Premium Sound ™ 23.9 Multimedia Connections • USB 2.0 / USB 3.0 • Ethernet LAN RJ-45 • Wi-Fi 802.11a/b/g/n (built-in) • BT2.1 with EDR & BT4.
creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 24 Help and Support TV does not respond to the remote control 24.1 The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behaviour. If the TV continues to be unresponsive to the remote control, you can check if the remote control is working by means of a mobile phone camera.
• Make sure that the volume is not muted or set to zero. • Make sure that the TV audio output is connected to the audio input on the Home Theatre System. Sound should be heard from the HTS speakers. • Some devices may require you to manually enable HDMI audio output. If HDMI audio is already enabled, but you still do not hear audio, try changing the digital audio format of the device to PCM (Pulse Code Modulation). Refer to the documentation accompanying your device for instructions.
Wi-Fi Internet Wi-Fi network not found or distorted • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • We recommend using the 5 GHz frequency (802.11ac) on your router when your TV is placed in the neighborhood of many other wireless routers (apartments, etc.). • Make sure that the firewalls in your network allow access to the TV's wireless connection.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 25 Safety and Care 25.1 Risk of Injury to Children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 25.2 Screen Care • Never touch, push, rub or strike the screen with any object.
more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. 26 Terms of Use 26.1 CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design), 2010/30/ EU (Energy Labelling) and 2011/65/EC (RoHS).
27 Copyrights 27.1 MHL 27.5 MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. Microsoft Windows Media Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. 27.2 Ultra HD Microsoft PlayReady The DIGITALEUROPE UHD Display Logo is a Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content.
27.7 Kensington (If applicable) Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. 27.8 Other Trademarks All other registered and unregistered trademarks are the property of their respective owners.
28 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index A Age Rating 20 Ambilight, Settings 56 Android Settings 39 Announcements 109 APP lock 42 APP, Voice Search 9 Apps 41 Audio Description 64 Auto Volume Levelling 54 B Bass 54 Bluetooth 30 Bluetooth, Pairing 30 Bluetooth, Remove device 31 Bluetooth, Select device 31 Brightness 50 C Camcorder, connect 34 Channel 18 Channel List Copy 17 Channel List Copy, copy 17 Channel List Copy, current version 18 Channel List Copy, upload 18 Channel, age rating 20 Channel, Channel List, about 18 Channel, Channel List
Problems, Remote Control 113 Problems, Sound 114 Problems, USB Connection 114 Programmes, Recommendations 77 Q Quick Picture Setting 53 R Remote Control, IR Sensor 11 Remote Control, Overview 8 S Safety Instructions 116 Satellite CAMs 13 Satellite Installation 13 Satellite, Add Satellite 14 Satellite, Channel packages 13 Satellite, Manual Channel Update 14 Satellite, Manual Installation 15 Satellite, Remove Satellite 14 Satellite, Unicable 14 Saturation 51 Screen Care 117 Sharpness 50 Sleep Timer 63 Soun
Powered by TCPDF (www.tcpdf.
