Register your product and get support at 6523 series www.philips.
Contents 1 Get Support 13.1 Setup Smart TV 43 13.2 Smart TV Start Page 13.3 App Gallery 43 3 1.1 Identify and Register your TV 3 1.2 TV Help and User Manual 3 1.3 On-line Help and User Manual 3 1.4 Consumer Care / Repair 3 2 Software 14 TV on Demand / Video on Demand 44 15 Netflix 4 4 4 2.1 Update Software 2.2 Software Version 3 Quick Guide 4 Setting Up 17 Specifications 6 10 5.1 Connectivity guide 10 5.2 Antenna 10 5.3 Satellite 10 5.4 Video Device 10 5.5 Audio Device 11 5.
1 1.3 Get Support On-line Help and User Manual 1.1 To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Identify and Register your TV Identify your TV - TV model number and serial number Go to www.philips.com/TVsupport. You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
2 back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. 2.1 Update Software Search for Updates The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. 1 - Standby / On To switch the TV on or back to Standby. To replace the batteries, open the battery compartment on the back of the remote control. 2 - Playback and Record • Play , to playback.
To open the Smart TV start page. Text/Teletext. To start the next or previous chapter on a disc. 3 - Colour keys Direct selection of options. Blue key , opens Help. 6 - Mute To mute the sound or to restore it. 4 - INFO To open or close programme info. 7 - TEXT To open or close Text/Teletext. 5 - BACK To close a menu without changing a setting. 6 - - EXIT To switch back to watch TV. To stop an interactive TV application. 3.2 7 - OPTIONS To open or close the Options menu.
3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. The menu will disappear automatically.
4 Setting Up 4.1 Read Safety Read the safety instructions first before you use the TV. • 43PUS65x3 VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 14 mm) • 50PUS65x3 VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 16 mm) • 55PUS65x3 VESA MIS-F 300x200, M6 (Minimum 10 mm, Maximum 14 mm) • 65PUS65x3 VESA MIS-F 400x200, M6 (Minimum 10 mm, Maximum 16 mm) To read the instructions, in Help > User manual, press the colour key Keywords and look up Safety and Care. 4.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On • Press the small joystick key on the back of the TV. Switch to standby To switch the TV to standby, press on the remote control. You can also press the small joystick key on the back of the TV.
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.
Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS.
With the application you use to start Miracast, you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme. 5.6 Mobile Device Wi-Fi Direct / Miracast From the TV About Wi-Fi Miracast To stop watching the screen of the device on TV, you can . . . You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™.
Smart Card MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. Apps - Philips TV Remote App Insert the smart card into the CAM module. See the instruction you received from the operator. The new Philips TV Remote App on your smartphone or tablet is your new TV buddy.
To set the PIN code for the CAM… a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. 1. Press SOURCES . 2. Select the channel type you are using the CAM for. 3. Press OPTIONS and select Common Interface. 4. Select the TV operator of the CAM. The following screens come from the TV operator. Follow the onscreen instruction to look up the PIN code setting.
USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting. 2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel, press (Pause). Trying to pause will start the formatting. Follow the instructions on screen.
6 Switch Source 6.1 Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To close the source menu without switching to a device, press SOURCES again. 6.2 Rename Device • Only CVBS, YPbPr, HDMI sources can be renamed or replace device icon.
for channels 7 Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. This can take a few minutes. 7.1 About Channels and Switch Channels Quick reinstall (Home) > Settings > Install Channels > Antenna/cable installlation > for channels To watch TV channels • Press . The TV tunes to the TV channel you last watched. • Press (Home) > TV > Channels and press OK. • Press + or - to switch channels.
frequency value to search for channels, select Advanced. the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels. Frequency step size The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz.
• Fine tune To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with or . If you want to store the channel found, select Done and press OK. automatically. • Up to 4 Satellites - You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation. • Unicable - You can use a Unicable system to connect the antenna dish to the TV.
Channels > Satellite installlation > satellite > Remove satellite Search for Manual Installation (Home) > Settings > Install Channels > Satellite installlation > installtion You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite operators do not allow removing a satellite. Manually install satellite. • LNB - Select the LNB for which you want to add new channels. • Polarisation - Select the polarisation you need.
Channel List copy To Installed TVs Introduction Depending on whether your TV is already installed or not, you must use a different method to upload a channel list. Channel list copy is intended for dealers and expert users. To an already installed TV 1 - Verify the country setting of the TV. (To verify this setting, see chapter Re-install channels. Start this procedure until you reach the country setting. Press BACK to cancel the installation.) If the country is correct continue with step 2.
1 - Tune to the channel of which you want to block the HbbTV pages. 2 - Press OPTIONS and select HbbTV on this channel and press (right). 3 - Select Off and press OK. 4 - Press (left) to go back one step or press BACK to close the menu. Subtitles Language If none of the preferred subtitle languages are available, you can select another subtitle language if available. If no subtitle languages are available, you cannot select this option.
Rename Channel Search Channels 1 - Press , to switch to TV. 2 - Press LIST to open the current channel list. 3 - Select one channel you want to rename. 4 - Press OPTIONS > Rename channel, and press OK. 5 - In the typing field, press OK to open on-screen keyboard, or press BACK to hide the on-screen keyboard. 6 - Use navigation keys to select a character, then press OK.
grid inserted on your favourite channel list. The "Did you know"-channel provides useful tips to improve the way you use your TV. Create a Favourites List 1 - While watching a TV channel, press LIST to open the channel list. 2 - Select the channel, and press Mark as favourites to mark as favourite. 3 - The selected channel is marked with a . 4 - To finish, press BACK . The channels are added to the Favourites list. * Satellite channel only can be searched on xxPxSxxxx TV models. 7.
Text Options In Text/Teletext, press OPTIONS to select the following… • Freeze page To stop the automatic rotation of subpages. • Dual screen / Full screen To show the TV channel and Text alongside each other. • T.O.P. overview To open T.O.P. Text. • Enlarge To enlarge the Text page for comfortable reading. • Reveal To unhide hidden information on a page. • Cycle subpages To cycle subpages when these are available. • Language To switch the group of characters that Text uses to display correctly. • Text 2.
8 Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. 8.1 What You Need Alternatively, you can press OPTIONS and select Change day. With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
5 - Select a programme and press OK to start watching. 6 - Press BACK to close. Set a Recording You can set a recording in the TV Guide. * Freeview Play is only for UK models. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with a (red dot) on the front of the programme name. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme.
9 Schedule a Recording Recording and Pause TV You can schedule a recording of an upcoming programme for today or a few days from today (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. To record a programme… 9.1 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) or (Left) to scroll through the programmes of a channel. 3 - With the programme highlighted, press the colour key Record .
press OK. 5 - Select the tuner from where you want to record and press OK. 6 - Select the channel to record from and press OK. 7 - Select the day of the recording and press OK. 8 - Set the start and end time of the recording. Select a button and use the (up) or (down) keys to set the hours and minutes. 9 - Select Schedule and press OK to schedule the manual recording. to start viewing the paused broadcast. Press these keys repeatedly to change speed.
10 Photo Options Videos, Photos and Music With a photo on screen, press OPTIONS to… List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. 10.1 From a USB Connection Repeat, Play once View the pictures repeatedly or once only. You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. Slideshow speed Set the speed of the slideshow.
Video Options During the video playback, press OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Charater set Select one of system for charater. Audio language Play the audio language if available. Status Display file information, like sound mode. Repeat, Play once Play videos repeatedly or once. 10.4 Music Play Music Open music folder 1 - Press SOURCES, select USB and press OK.
ideal sound settings. • Audio out - Set the TV to play the sound on TV or on the connected audio system. • Ambilight style* - Select one of preset Ambilight styles. • Ambilight+hue* - Switch Ambilight+hue on or off. • Sleep timer - Set the TV to switch to standby automatically after a preset time. • Screen off - If you only listen to music on TV, you can switch off the TV screen. 11 Open TV Setting Menus 11.1 Home Menu Overview Press (Home) to select one of below menus, then press OK.
Note: Setting of brightness much away from reference value (50) may result lower contrast. Custom a style You can adjust and stored picture settings in in the currently selected picture style, like Colour, Contrast or Sharpness. Expert mode picture settings Restore a style Colour Settings To restore the style to its original setting, go to (Home) > Settings > All settings > Picture > Picture style, then press Restore style.
edges and details. HDR Plus (Home) > Settings > All settings > Picture > Expert mode settings > HDR Plus Picture Clean Noise reduction (Home) > Settings > All settings > Picture > Expert mode settings > reduction Set HDR Plus to Off, Minimum, Medium, Maximum to set the level at which the TV automatically shows superior contrast and brightness effect for HDR content. Select Maximum, Medium, Minimum to set the level for removing the noise in video content.
Note: Only available when Motion styles set to Personal. Sound Settings Sound Style Picture Format Select a style (Home) > Settings > All settings > Picture > Picture format For easy sound adjustment, you can select a preset sound style. If the picture is not filling the whole screen, if black bars are showing on the top or bottom or at both sides, you can adjust the picture to fill the screen completely.
TV Placement Digital Output Settings (Home) > Settings > All settings > Sound > TV placement Digital output settings are available for SPDIF output (optical) and HDMI ARC sound signals. Digital out fomat Select On a TV stand or On the wall to have best sound reproduction according to the setting. (Home) > Settings > All settings > Sound > Advanced > Set the audio out signal of the TV to fit the sound capabilities of the connected Home Theatre System.
setting is 60ms. CAM Operator Profile (Home) > Settings > All Settings > Channels > CAM Operator Profile Channels To switch on operator profile for CI+/CAM for easy channel installation and updates. TV Guide (Home) > Settings > TV guide All Settings > Channels > General Settings The TV Guide receives information (data) from broadcasters or from the Internet. In some regions and for some channels, TV Guide information might not be available.
(Home) > Settings > All settings > General settings > EasyLink > EasyLink > On Eco Settings Set energy saving level remote control (Home) > Settings > All settings > General settings > Eco settings > Energy saving (Home) > Settings > All settings > General settings > EasyLink > EasyLink remote control > On Select Minimium, Medium, or Maximium to have different degress for energy saving, or select Off to switch off energy saving mode.
Adjust Picture and audio audio (Home) > Settings > All settings > General settings > Shop setup > Picture and audio Select Optimized to shop or Custom settings for picture and audio settings. Digital TV channels can broadcast audio with several spoken languages for a programme. You can set a preferred primary and secondary audio language. If audio in one of these languages is available, the TV will switch to this audio.
• If none of the automatic settings display the time correctly, you can set the time manually. • If you schedule recordings from the TV Guide, we recommend not to change the time and date manually. Digital TV channels can broadcast special audio commentary describing what is happening on screen. Set time zone or set a time offset for your region • Select Mixed volume, you can mix the volume of the normal audio with the audio commentary. Press the arrows (up) or (down) to adjust the value.
successful. 12 Network Make the Connection - WPS 12.1 (Home) > Settings > All settings > Network > Connect to network > Home Network WPS If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS. To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet.
Make the Connection Digital Media Renderer - DMR (Home) > Settings > All settings > Network > Connect to network > (Home) > Settings > All settings > Network > Digital Media Renderer DMR Wired 1 - Connect the router to the TV with a network cable (Ethernet cable**). 2 - Make sure that the router is switched on. 3 - The TV constantly searches for the network connection. 4 - A message will be shown when the connection is successful.
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. 13 Smart TV Search With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories.
14 TV on Demand / Video on Demand TV on Demand (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand (Home) > Apps > Video on Demand You can rent movies from an online rental video store.
15 Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.
16 16.3 Environmental End of Use Disposal of your old product and batteries 16.1 Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. European Energy Label The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
17 17.4 Specifications Supported Input Resolution Video 17.1 Power Support Timing Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport Video support timing also includes field/frame rate 23.976Hz, 29.97Hz and 59.94Hz.
• 1080i - 50Hz, 60Hz • 1080p - 50Hz, 60Hz Wi-Fi Certified 17.5 Performance may vary, depending on the capabilities of the mobile device and the software used. This TV supports Miracast certified devices. Supported Input Resolution Computer 17.
18 respond to the remote control. Troubleshooting Creaking sound at startup or switch off When you are turning the TV on or standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. 18.1 Tips If you can't find a solution for your TV problem in Troubleshooting, you can use Keywords in Help > User manual to find the information you are looking for.
digital channels available. • Check if you selected the correct DVB (Digital Video Broadcast) system. Select DVB-T (terrestrial) when you use an antenna or common antenna, select DVBC (cable) if you use a TV cable service. • Redo the installation and check if you select the correct country and system. • If the TV finds one satellite but cannot find a second one, turn the dish a few degrees. Align the dish to get the strongest signal on the first satellite.
Call the telephone number for your country. (Home) > Settings > All settings > General settings > Location Sound but no picture • Change to other video sources and then change back to current source. • Select Picture style and select a style and press OK. (Home) > Settings > All settings > Picture > Picture style • Restore picture style, select back to Picture style, then press Restore style. • Reset all TV settings, go to (Home) > Settings > All settings > General settings > Reinstall TV.
no picture is displayed, switch the source from one device to another and back again. • This is an Ultra HD TV. Some older devices connected with HDMI - do not recognise an Ultra HD TV electronically and might not work correctly or show distorted picture or sound. To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection.
ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. 19 Safety and Care 19.1 Risk of Injury to Children Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 19.2 Screen Care Clean • Never touch, push, rub or strike the screen with any object.
CE compliance Hereby, TP Vision Europe B.V. declares that this television is in compliance with the essential requirements and other relevant provisions of Directives 2014/53/EU (RED), 2009/125/EC (Eco Design) and 2011/65/EC (RoHS). 20 Terms of Use 2018 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product.
21 Copyrights 21.1 MHL 21.5 Wi-Fi Alliance MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC. Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 21.2 HDMI 21.6 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
It is intended to conform to the IEEE POSIX P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use. In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ 22 Open Source 22.1 Open Source Software This television contains open source software. TP Vision Europe B.V.
findutils (4.2.31) The GNU Find Utilities are the basic directory searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/ Inetutils is a collection of common network programs. Source: http://www.gnu.org/software/inetutils/ iptables (1.4.15) For Cross connection. Source: http://www.netfilter.
implementation, support and improvements for libusb. This piece of software is made available under the terms and conditions of the libusb license, which can be found below. Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/ Source: https://modules.wiki.kernel.org/index.php/M ain_Page mtd-utils The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system.
Source: http://www.openssl.org/ u-Boot (2011.12) The uboot will load the linux kerenl to dram,and jump to run . This piece of software is made available under the terms and conditions of the u-Boot loader license, which can be found below. Source: http://www.denx.de procps (ps, top) (3.2.8) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem. The package includes the programs ps, top, vmstat, w, kill, free, slabtop, and skill.
23 Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Index A Favourite Channels 23 Advanced Picture Settings 33 Advanced Sound Settings 36 Antenna 10 App Gallery 43 Audio Language 39 Audio Out Menu 36 Auto Clock Mode 39 G Gamma 34 General Settings 37 Get Support 3 H HbbTV 37 HDMI 10 HDMI - CEC 37 HDMI ARC 11 HDMI Sound System 36 HDMI Ultra HD 38 HDR 34 Headphone Connection 11 Help Menu 3 Home Menu 32 Home or Shop 38 B Batteries 5 C CAM PIN 40 Channel List 22 Channel List Copy 21 Channel Logos 37 Channel Options 21 Channel, Channel Filter 23 Channel, Ren
Picture Style 32 Picture, Colour 33 Picture, Contrast 33 Picture, Sharpness 33 Power Cable 8 Problems 49 Product Fiche 46 Update Software - Local Updates 4 Update Software - OAD 4 Update Software - USB 4 USB Flash Drive 14 USB Hard Drive 37 USB Hard Drive - Format 14 USB Hard Drive - Install 14 USB Hard Drive Connection 14 USB Keyboard Settings 37 User Manual 3 Q Quick Picture Settings 35 Quick Settings Menu 32 V R Video Contrast 34 Video on Demand 44 View Network Settings 42 Viewing Distance 8 Recept
Powered by TCPDF (www.tcpdf.