Compatibility Chart

InstantFit Ballast Compatibility Guide 15
1. System performance (Philips InstantFit LED T8 lamps and ballast) has been evaluated by the lamp and ballast manufacturer.
2. System performance (Philips InstantFit LED T8 lamps and ballast) has been evaluated by the lamp manufacturer only.
3. Typical application for U-Bent lamps is with 2-lamp ballasts.
4. Ballasts test are performed with a specic manufacturing date code. Older ballasts, with the same model numbers may have dierent electronic designs and
consequently compatibility may vary. Similarly, newer ballast, with the same model number, may have undergone revisions that may aect compatibility.
Compatibility may also extend beyond this list and Philips recommends testing a few xtures with the InstantFit lamps, even if the ballast is on this
compatibility list, to ensure compatibility and performance.
5. Connect BRN/BRN-W leads.
6. Please contact the emergency ballast manufacturer for wiring diagrams.
7. UL/CSA classied with the listed ballasts.
Please contact Philips for questions about third party ballasts that are not on this list. Information in this document is
subject to change without prior notice
© 2019 Signify Holding. All rights reserved. Signify
reserves the right to make changes in specications and/
or to discontinue any product at any time without notice
or obligation and will not be liable for any consequences
resulting from the use of this publication.
PLt-16118CR 02/19
Signify North America Corporation
200 Franklin Square Drive, Somerset, NJ 08873
Tel. [phone]
Signify Canada Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
Tel. [phone]
FOOTNOTES