Register your product and get support at www.philips.
Contents 6.7 Batteries 28 6.8 Cleaning 28 1 TV Tour 4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Android TV 4 Apps 4 Movies and Missed Shows 4 Social Networks 4 Pause TV and Recordings 4 Gaming 4 Skype 4 3D 5 Smartphones and Tablets 5 7 Home Menu 30 7.1 7.2 7.3 7.4 8 Now on TV 31 8.1 About Now on TV 31 8.2 What You Need 31 8.3 Using Now on TV 31 2 Setting Up 6 2.1 2.2 2.3 2.4 2.5 2.6 Read Safety 6 TV Stand and Wall Mounting 6 Tips on Placement 6 Power Cable 6 Antenna Cable 6 Satellite Dish 6 9 Apps 32 9.
16.3 Play a Game 49 16.4 Gamepads 49 26.7 Connectivity 104 26.8 Sound 104 26.9 Multimedia 104 17 Videos, Photos and Music 50 17.1 17.2 17.3 17.4 17.5 17.6 27 Support 106 From a USB Connection 50 From a Computer or NAS 50 From a Mobile Device 50 Videos 51 Photos 51 Music 52 27.1 27.2 27.3 27.4 27.5 Register 106 Troubleshooting 106 Help 107 Online Help 107 Repair 108 18 Pause TV 53 28 Safety and Care 109 18.1 What You Need 53 18.2 Pause a Programme 53 28.1 Safety 109 28.
* Depending on the video streaming service of the selected video store. 1 TV Tour 1.4 1.1 Social Networks Android TV This Philips TV is powered by Android™. No need to get up to check your friend's messages on your computer. As on your smartphone or tablet, your new TV has the most practical Apps for every bit of TV entertainement you can think of. Watch TV channels, play online games, call a friend on Skype or simply speak and ask the TV to find your favourite song on the Internet.
You can make free Skype-to-Skype voice and video calling to other Skype-enabled devices. To make a video call, you need a camera with a built-in microphone and a good connection to the Internet. Some Philips TVs have a camera and microphone built in. For more information, press Keywords and look up Skype. 1.8 3D Your new TV is a 3D TV. Enjoy the immersive experience of watching a movie in 3D.
pull the cable. 2 Setting Up 2.1 Read Safety Read the safety instructions first before you use the TV. To read the instructions, press the colour key Keywords and look up Safety instructions. Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. 2.2 TV Stand and Wall Mounting Press the colour key Keywords and look up Switching On for more information on switching the TV on or off. TV Stand 2.
During the satellite installation, select One Tuner. Two Tuners To watch a satellite channel and to record another channel at the same time, you must connect 2 identical cables from your satellite dish to the TV. Connect the first cable from the satellite dish directly to the SAT 1 connection and connect the second cable to SAT 2. Use a coaxial cable fit for connecting a satellite antenna dish. Make sure your satellite dish is perfectly aligned before you start the installation.
5 - Go to the router, press the WPS button and return to the TV within 2 minutes. 6 - Click Connect to make the connection. 7 - A message will be shown when the connection is successful. 3 Network 3.1 Connect to Network WPS with PIN Code If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
Switch On with Wi-Fi (WoWLAN) You can switch this TV on from your smartphone or tablet if the TV is in Standby. The setting Switch On with Wi-Fi (WoWLAN) must be switched on. To switch on WoWLAN… 1 - Press and press (left) Setup. 2 - Click Network and click Switch on with Wi-Fi (WoWLAN). 3 - Click On. 4 - Press BACK repeatedly if necessary, to close the menu.
3 - Enter the name with the Remote Control Keyboard. 4 - Click Done. 5 - Press BACK repeatedly if necessary, to close the menu. Clear Internet Memory With Clear Internet Memory you clear all Internet files stored on your TV. You clear your Philips Smart TV registration and parental rating settings, your video store app logins, all Smart TV app favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
4 Connections 4.1 Tips on Connections Connectivity Guide EasyLink HDMI CEC Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device.
Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS. Y Pb Pr Y Pb Pr - Component Video is a high quality connection. The YPbPr connection can be used for High Definition (HD) TV signals.
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink. CI+ This TV is ready for the CI+ Conditional Access. Example HDMI CEC branding names are property of their respective owners. With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module.
4.4 Two Smart Cards Set-Top Box - STB Some Digital TV operators can provide a second CI+ module (CAM) and smart card. A second CAM and smart card is needed when you want to watch one channel while recording another channel from the same TV operator. Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV. If you can watch the same amount of channels with each card, both cards have identical viewing rights.
Connect with HDMI Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System. Switch Off Timer Switch off this automatic timer, if you only use the remote control of the Set-top box.
Audio Out Offset Problems with HTS sound If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms. Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.
If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control. For more information on EasyLink, press the colour key Keywords and look up EasyLink HDMI CEC. 4.9 Game Console HDMI For best quality, connect the game console with a High speed HDMI cable to the TV. 4.10 Gamepad Connect a Gamepad To play games from the Internet on this TV, you can connect a selected range of wireless Gamepads. When you connect the Gamepad, you can use it immediately.
Trouble with Interference To solve possible interference with other wireless devices on TV… • Use a USB extension cord and move the nano receiver about 1 meter away from the TV. • Alternatively, you can use a powered USB hub connected to the TV and plug in the nano receivers in the USB hub. Warning 4.11 The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application.
press OK. 3 - Press the arrows (up) or (down) to increase or lower the speed. 4 - Press the arrow (right) move the mouse around to test the speed you set. 5 - Press the arrow (left) to return to the slider bar. You can adjust the setting again. 6 - With the slider bar selected, press (left) to store and close this setting. 7 - Press BACK repeatedly if necessary, to close the menu.
If the contents list does not appear automatically, press SOURCES, and click USB. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. 4.16 Computer Ultra HD on USB You can view photos in Ultra HD resolution from a connected USB device or flash drive. The TV will downscale the resolution to Ultra HD if the resolution of the photo is higher. You cannot play a native Ultra HD video on any of the USB connections.
2 - Press and press (left) for Setup. 3 - Click Sound > Wireless Speakers > Add New Speaker. 4 - Follow the instuctions on screen. You will pair the device with the TV and the TV will store the connection. 5 - Press BACK repeatedly if necessary, to close the menu. Settings If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically.
5 5.3 Switching On and Off Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. 5.1 On, Standby or Off To open the basic menu… 1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel or Sources. If the TV is in Shop location, you can also select Camera. 3 - Press up or down to adjust the volume or tune to the next or previous channel.
1 - Press and click Eco Settings. 2 - Click Switch Off Timer. Click inside the slider bar to adjust the value. The value 0 (Off) deactivates the automatic switch off. The icon is shown in front of Switch Off Timer when it is active. For more information on environmentally friendly TV settings, press the colour key Keywords and look up Eco Settings.
6 Remote Control 6.1 Key overview Top 1 - HOME To open the Home menu. 2 - SOURCES To open the Sources menu. 3 - Colour keys Direct selection of options. Blue key , opens Help. 4 - INFO To open or close programme info. 1 - Standby / On To switch the TV on or back to Standby. 5 - BACK To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous App/Internet page. 2 - Playback and Record • Play , to playback.
2 - Number keys To select a channel directly. briefly jiggle the remote control. 3 - SUBTITLE To switch Subtitles on, off or on during mute. Clicking 4 - LIST To open or close the Channel List. To select what you need, hover over the item with the Pointer and press – click – the OK key. As you do with a computer mouse. For the Colour Keys, INFO and OPTIONS you still need to press the keys on the remote control. 5 - Channel To switch to the next or previous channel in the channel list.
channel and will try to tune to it. Switch Off Pointer PLAY, [e.g. say 'play Jingle Bells'] - The TV will look for this song in you collection of music and will try to play it. To switch off the Pointer… SEARCH, [e.g. say 'search The Hobbit'] - The TV will search your media and show the search results. 1 - Press and press (left) Setup. 2 - Select General Settings > Remote Control Pointer and select Off. 3 - Press BACK repeatedly if necessary, to close the menu. GOOGLE, [e.g.
Qwerty and Cyrillic Uppercase and Lowercase Overview of a Qwerty/Cyrillic keyboard.* To type an uppercase character, press the (Shift) key just before you type the character. To type several uppercase characters consecutively, press and hold the key while typing. To type uppercase constantly, press the key for 2 seconds to switch the keyboard in uppercase mode. To switch out of uppercase mode, press the key again.
The Cyrillic characters are shown at the top right of the keyboard keys. 6.6 IR Sensor To write Cyrillic characters… The remote control of the TV uses RF (radio frequency) to send its commands to the TV. With RF, you do not need to point the remote control at the TV. 1 - Press on the remote control. 2 - Press again to switch back to Qwerty. However, the TV can also receive commands from a remote control that uses IR (infrared) to send commands.
the remote control.
11 - Options, the icon is white when Options are available. 12 - , open the tab full page. 7 Home Menu 7.3 7.1 Notifications Open the Home Menu The TV can receive a wide range of messages -called Notifications. These Notifications come from any application on your TV or can be sent to you from friends or App service centres. Notifications are collected in a list and the latest Notification is placed on top. To really enjoy the benefits of Android, connect the TV to the Internet.
1 - Press HOME to open the Home menu. 2 - Click in the top bar to open Now on TV. 8 Now on TV In Now on TV you can… • click on a programme icon to tune to the ongoing programme. • click on an icon of a scheduled programme to tune to the channel already. • click on an advert to open the webpage of the advert. 8.1 About Now on TV With Now on TV in the Home menu, the TV recommends the 9 most popular programmes to watch at this moment.
9 To stop an App… Apps Press HOME and select another activity or press EXIT to watch TV. 9.1 9.4 About Apps Chrome™ With Apps in the Home menu, you open the Apps pages. Open the Browser The Apps pages show the collection of Apps (Applications) on your TV. Like Apps on your smartphone or tablet, the Apps on your TV offer specific functions for an enriched TV experience. Apps like YouTube, Twitter, TV games or weather forecasts (a.o.).
press the colour key Keywords and look up Videos, Photos and Music. 9.5 App Lock You can set the TV to lock Apps unsuited for children. 9.7 Only Apps from the App Gallery can be locked. To unlock an App you need the Child Lock PIN code of the TV. Remove Apps and Widgets To lock Apps unsuited for children… You can remove Apps and Widgets from the Apps pages. 1 - Press HOME to open the Home menu. 2 - Click in the top bar to open Apps. 3 - Press OPTIONS and click Terms of Use.
Read the Google Legal Information. To set the Android settings… 1 - Press and press (left) Setup. 2 - Click General Settings and click Android Settings. 3 - Click on the setting you want. 4 - Press BACK repeatedly if necessary, to close the menu. 9.10 Terms of Use - Apps When you connected the TV to the Internet, you were invited to agree to the Terms of Use. To use the Apps from the Philips App Gallery and Google Play, you must agree to the Terms of Use.
10 10.3 Video on Demand Streaming With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard Drive connected, you can also download rental movies from video stores that offer movie downloading only. Consult the video store for terms and conditions. 10.
11 TV on Demand 11.1 About TV on Demand With TV on Demand in the Home menu, you can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Also, you can let TV on Demand do some personalised recommendations of programmes, based on the TV installation and the programmes you watch regularly. To get these personalised recommendations, you must agree to the Personal Recommendations Consent in the Terms of Use.
12 channels and also filter on digital or analogue channels. Channels After an Automatic Channel Update, the Channel List is automatically updated. New channels are marked with an icon. 12.1 Channel icons Watching Channels Switch Channels Favourite channel Locked channel New channel Scrambled channel To start watching TV channels, press . The TV tunes to the channel you last watched.
3 - Press the colour key Move. 4 - Place the Pointer on top of the channel that you want to move and click and drag it to its new position. If the channel needs to go to the next or previous page of channels, drag the channel to the top or bottom edge of the page. The previous or next page will appear. An arrow indicates the new position. 5 - Release the OK key to drop the channel on its new position. 6 - You can select another channel to move. 7 - To finish moving channels, press Close.
3 - Enter a 4-digit Child lock code. If you did not set a code yet, click Set code in Child Lock. Enter a 4-digit Child lock code and confirm. Now you can set an age rating. 4 - Back in Parental Rating, click on the age and press OK. 5 - Press BACK repeatedly if necessary, to close the menu. options are available. Open the options menu While watching a channel, press OPTIONS. To switch off the parental age rating, select None. However, in some countries you must set an age rating.
4 - The TV stores your settings as Last Settings when you press Basic or press Back to close the menu. • Shift – Click on the arrows to shift the picture. You can only shift the picture when it is zoomed in. • Zoom – Click on the arrows to zoom in. • Stretch – Click on the arrows to stretch the picture vertically or horizontally. • Last Setting – Click to return to the last setting you did for this connection (source). • Undo – Click to return to the picture format you started with.
of this word or number. 4 - Press OK again to jump to the subsequent occurence. 5 - To stop searching, press (up) until nothing is selected. If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch off Text 2.5… Text from a connected device 1 - Press TEXT. 2 - With Text/Teletext open on screen, press OPTIONS. 3 - Click Text 2.5 > Off. 4 - Press BACK repeatedly if necessary, to close the menu.
To know if a channel is analogue or digital, switch to the channel and open Channel Info in OPTIONS. Interactive TV About iTV Audio Languages With interactive TV, some digital broadcasters combine their normal TV programme with information or entertainment pages. On some pages, you can respond to a programme or vote, do online shopping or pay for a video-on-demand programme. Language Settings Digital TV channels can broadcast audio with several spoken languages for a programme.
Most iTV pages inform you which key to use to close. To force an iTV page to close, switch to the next TV channel and press BACK. made. Using the TV Guide 12.2 Open the TV Guide TV Guide To open the TV Guide, press TV GUIDE. Press TV GUIDE again to close. What You Need The first time you open the TV Guide, the TV scans all TV channels for programme information. This may take several minutes. TV Guide data is stored in the TV.
Search by Genre If the information is available, you can look up scheduled programmes by genre like movies, sports, etc. To search for programmes by genre, press OPTIONS and click Search by Genre. Select a genre and press OK. A list with the found programmes appears. Recordings From the TV Guide, you can instantly record or schedule a recording of a TV programme. To store the recordings, connect a USB Hard Drive to the TV.
To switch on both disc player and TV from Standby and start playing the disc immediately, press (play) on the TV remote control. The device must be connected with an HDMI cable and both TV and device must have HDMI CEC switched on. 13 Sources 13.1 Switch to a device From the list of Sources, you can switch to a connected device and watch its programme. To switch to a connected device… 1 - Press SOURCES to open the Sources menu. 2 - Click on the icon of the connected device.
14 Automatic Switching 3D The first time a 3D signal is detected, you can set your preference on how to start 3D in the future. You can change this setting in the Setup menu later. 14.1 What You Need • To switch to 3D automatically, select Automatic. • To show a notification first, select Notification only. • To never switch to 3D, select Never. This is an active 3D TV. On this TV, you can watch 3D programmes and movies in full High Definition resolution.
Active 3D glasses). • Do not use cleaning chemicals containing alcohol, solvent, surfactant, or wax, benzene, thinner, mosquito repellent or lubricant. Using these chemicals can cause discoloration or cracks. 14.5 Health Warning • Watching 3D is not recommended for children under the age of six. • If you or your family have a history of epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing.
possibly not appear in the small screen of Multi View. You might not have the rights available to descramble that channel on that tuner. Multi View cannot show channels from Pause TV. 15 Multi View 15.1 15.4 About Multi View Swap Screens With the Multi View task bar, you can easily switch from one recently started application - TV, Text, TV Guide, Chrome, etc. - to the other.
For more information on connecting a Game Console, press Keywords and look up Game Console, connect. 16 Games From the Apps Pages 16.1 What You Need On TV, you can play a game installed on the Apps pages. On this TV, you can play games from… To start the game… • A connected Game Console • The App Gallery in the TV Apps menu • The Internet on this TV • The Google Play store, games downloaded on this TV 1 - Press HOME to open the Home menu. 2 - Click in the top bar to open Apps.
17 17.3 Videos, Photos and Music From a Mobile Device About Wi-Fi Miracast You can view your photos or play your music and videos from a mobile device with Wi-Fi Miracast™. 17.1 From a USB Connection Your TV is a Wi-Fi Certified Miracast™ device. With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), share photos or anything else that's on screen of the device.
You might find the Wi-Fi connection (e.g. 'DIRECT_tvname') also in lists of available networks on other network devices, e.g. your laptop computer. However, this connection can only be used by Wi-Fi Miracast devices. 17.4 Videos Play Videos Stop Sharing How to open a list of media files on TV depends on the type of device where the files are stored. You can stop sharing a screen from the TV or from the mobile device. To play a video, click on the file name of the video in the List of Media files.
• To stop the slide show or close the photo, press LIST or (Stop). Press again to hide the info. To play music with the slide show… Music Options 1 - Start the music before you start the slide show. 2 - Select a song or a folder with songs and press OK. 3 - Select a photo or a folder with photos and press Slide Show. Colour key functions and Options for playing music. • Play All – Play all songs in this filder. • Play One – Play this song only.
Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. 18 Pause TV To replay a current broadcast… 1 - Press (Pause) 2 - Press (Left). You can press repeatedly until you reach the start of the broadcast storage or the maximum time span. 18.1 What You Need You can pause a digital TV broadcast and resume watching it later.
3 - The TV adds some time buffer at the end of the programme. You can add some extra buffer if needed. 19 Recording To adjust the end time of the recording… 1 - Press HOME to open the Home menu. 2 - Click Apps and click Recordings. 3 - Select the recording you want to adjust and press Adjust Time. If the TV Guide comes from the Internet, select the recording and press OK. If programme info is shown, press Adjust Recording. 19.
Band available, you can only watch the channels that don't need decoding and the channel you are recording. For more information, press the colour key Keywords and look up Smart Card, CAM. 19.3 Watch a Recording To watch a recording… 1 - Press HOME to open the Home menu. 2 - Click Apps and click Recordings. 3 - In the list, select the recording and press OK to start the playback. You can use the (Forward), (Rewind), (Pause) or (Stop) keys on the remote control.
20 New Skype Account Skype If you don't have a Skype Name and Password yet, you can create a new Skype account on your computer. Once you successfully created the new account, you can use your Skype Name and password to sign in on TV. 20.1 About Skype To create a Skype account on your computer, go to www.skype.com With Skype™ on your TV, you can create and share memories right from your living room, even when you’re apart.
• Settings In Settings, you can change your password, set your privacy and Voice messages settings or view your blocked contacts and much more. You can also sign out of Skype from the Settings menu. 1 - On the People page, click Add a friend. 2 - Click Add a telephone number. 3 - To enter the name of your contact, click Enter name. Enter a name and click Save when you’re done. 4 - Click Add number next to the type of phone number you want to add. 5 - Click on any country.
2 - Click Select country to add the country prefix. Look for the country you need and click its name and flag. 3 - Return to Call phones. 4 - Click on the numbers on the dial pad to enter the phone number. 5 - Click Call. 6 - To end the call, click End call. 20.5 Calling on Skype Video or Voice Call Make a Video Call No emergency calls with Skype To make a Video call… Skype is not a replacement for your telephone and cannot be used for emergency calling.
start Skype, it will open on your People page. No need to sign in first. Record a Voice Message If your contact has activated Voice messages, you can leave a voice message if they don't answer your call. General To record a Voice message… 1 - Call a contact. If your call was not answered, Skype will propose to send a Voice message. 2 - Speak your message after the beep. 3 - To stop recording, click End call.
My Profile Picture You can set Skype to restrict showing your profile picture. To set the restriction… 1 - Sign in to Skype with your account. 2 - In the Skype menu, click Settings. 3 - Click Security > Show My profile picture > Anybody or Only my contacts. Alerts You can set Skype alerts for an Incoming call, a Contact request, a Voice message or a Missed call. You can also set the Incoming calls alert and the Ring volume. To set the Skype alerts… 1 - Sign in to Skype with your account.
21 Start Up Multi Room When you start Multi Room for the first time, switch on both TVs. 21.1 About Multi Room Once this TV made a connection with the other TV, the other one will appear automatically in the Browse network menu even when it's in Standby. With Multi Room you can watch a TV programme that comes from another TV in your home. The programme is streamed from one TV to the other. You can stream a programme to a TV that has no antenna connection or has no Smart card subscription of its own.
22 Share This… With the Share This key on the back of the Remote Control and next to the keyboard at the right, you can share the channel and programme name you’re watching or share the Internet address of the site you’re on. You can share the title and info of a programme selected in the TV Guide or share the App name and its icon from Smart TV. You can share all these things on Facebook or Twitter or any social network available on your Smart TV App pages. Your TV must be connected to the Internet.
23 Philips TV Remote App The new Philips TV Remote App is your new TV buddy. With the TV Remote App on your smartphone or tablet, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. Look up what you want to watch and watch it on your phone or TV. With the TV Remote App you are in control. You might consider to simply lower the TV volume. Download the Philips TV Remote App from your favourite app store today.
24 Restore a Style Setup To restore the style to its original setting… 1 - Press SETTINGS, select All Settings and press OK. 2 - Click Picture > Picture Style and click on the Picture Style you want to restore. 3 - Press the colour key Restore Style. The style is restored. 4 - Press BACK repeatedly if necessary, to close the menu. 24.1 Quick Settings The TV settings you need most often are bundled in the Quick Settings menu. To open the menu… Home or Shop 1 - Press .
Contrast Custom Colour Temperature With Contrast, you can adjust the contrast of the picture. If you are watching 3D pictures, this setting is switched to 3D contrast. With Custom Colour Temperature, you can set a colour temperature yourself. To set a custom colour temperature, first select Custom in the Colour Temperature menu. Custom Colour Temperature is a setting intended for expert users. To adjust the contrast… 1 - Press and press (left) Setup.
Mode and click Best Power, Best Picture, Standard or Off. 3 - Press BACK repeatedly if necessary, to close the menu. Gamma With Gamma, you can set a non-linear setting for picture luminance and contrast. Gamma is a setting intended for expert users. Dynamic Contrast To adjust the level… With Dynamic Contrast, you can set the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture. 1 - Press and press (left) Setup.
• Personal - The sound preferences you set during the first start up. • Original - Most neutral sound setting • Movie - Ideal for watching movies • Music - Ideal for listening to music • Game - Ideal for gaming Natural Motion With Digital Natural Motion, you can reduce the motion judder, visible in movies on TV. Digital Natural Motion makes any movement smooth and fluent. To adjust the motion judder… 1 - Press and press (left) Setup. 2 - Click Picture > Advanced > Motion > Digital Natural Motion.
automatically, select Off in Auto Surround 3D. 2 - Click Sound > Advanced > Clear Sound. 3 - Click On or Off. 4 - Press BACK repeatedly if necessary, to close the menu. To set the surround mode… 1 - Press and press (left) Setup. 2 - Click Sound > Surround Mode. 3 - Click Stereo, Incredible Surround or Incredible Surround 3D. 4 - Press BACK repeatedly if necessary, to close the menu.
You can connect a wireless speaker – a subwoofer or a sound bar – to this TV. 1 - Press and press (left) Setup. 2 - Click Sound > Wireless Speakers > Subwoofer Volume and click inside the slider bar to adjust the value. 3 - Press BACK repeatedly if necessary, to close the menu. A range of selected Philips wireless speaker products can connect and play the TV sound. Consult the Philips website for suited wireless audio products for this TV - www.philips.
TV Placement Ambilight Saturation As part of the first installation, this setting is set to either On a TV stand or On the Wall. If you have changed the placement of the TV since then, adjust this setting accordingly for best sound reproduction. With Ambilight Saturation, you can set the level of colour saturation of the Ambilight. To adjust the level… 1 - Press and press (left) Setup. 2 - Click Ambilight > Saturation and click inside the slider bar to adjust the value.
2 - Press and press (left) Setup. 3 - Click Ambilight > Ambilight+hue. and click Switch On. 4 - Click Configure. 5 - If the TV is connected to your home network, it will start looking for the Philips Hue Bridge immediately. If the TV is not yet connected to your network, the TV will start the network setup first. You must connect the TV to your home network. Configure Bulb In the following step, you will configure each Philips Hue bulb.
to appear as they are intended. To switch the hue bulbs off… To select the colour of the wall . . . 1 - Press and press (left) Setup. 2 - Click Ambilight > Advanced > Lounge Light+hue. 3 - Click Off. 4 - Press BACK repeatedly if necessary, to close the menu. 1 - Press and press (left) Setup. 2 - Click Ambilight > Advanced > Wall Colour. 3 - In the colour palette, click the colour that matches the colour of the wall behind the TV. 4 - Press BACK repeatedly if necessary, to close the menu.
Clock Screen Off To know what time it is, press . The Home Menu always shows what time it is. If you only listen to music, you can switch off the TV screen to save energy. In some countries, digital broadcasts do not send UTC Coordinated Universal Time information. The daylight saving change might be ignored and the TV might show an incorrect time. To only switch off the TV screen… 1 - Press and click Eco Settings. 2 - Click Screen Off.
Switch On Switch On With Accessibility switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people. To switch on Voice Guidance… 1 - Press and press (left) for Setup. 2 - Select Accessibility > Voice Guidance. 3 - Select On and press OK. 4 - Press BACK repeatedly if necessary, to close the menu. Switch on If you did not switch on Accessibility during the installation, you can still switch it on in Setup.
Also, before you can switch on Audio Description, you have to switch on Accessibility in Setup. 24.8 Network With Audio Description, a narrator's commentary is added to the normal audio. To switch on the commentary (if available)… For more information, press the colour key Keywords and look up Network. 1 - While watching a TV channel, press OPTIONS. 2 - Select Accessibility > Audio Description and press OK. 3 - Select On and press OK. 24.
New channels Channel List Copy In the Channel List, newly found channels are marked with a . Introduction To open a list of only the new channels… Channel List Copy is intended for dealers and expert users. In some countries, Channel List Copy is only available for copying satellite channels. 1 - Press LIST to open the Channel List. 2 - Press OPTIONS and click Show New Channels. You can mark a channel as a favourite, lock or rename a channel.
this TV. 5 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive. DVB Settings Network Frequency Mode If you intend to use the fast Quick Scan method in Frequency Scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable operator in your country.
not subscribe to pay TV channels or services, you can select Free Channels Only. 24.10 Installation Satellite For more information, press the colour key Keywords and look up CAM - Conditional Access Module. Installing Satellites About Installing Satellites Reception Quality This TV has two built-in satellite DVB-S/DVB-S2 tuners. You can check the quality and signal strength of a digital channel. If you have your own antenna, you can reposition the antenna to try and improve the reception.
available channels, select one or the other. The TV will install the satellite channels and radio stations. 8 - To store the satellite setup and installed channels and radio stations, click Finish. User Band Number In a Unicable system, each connected satellite tuner must be numbered (e.g. 0, 1, 2 or 3 etc.). You can find the available user bands and their number on the Unicable switchbox. User band is sometimes shortened as UB. There are Unicable switchboxes that offer 4 or 8 user bands.
Manual Channel Update Manual Installation You can always start an channel update yourself. Manual Installation is intended for expert users. To start a channel update manually… You can use Manual Installation to quickly add new channels from a satellite transponder. You need to know the frequency and polarization of the transponder. The TV will install all channels of that transponder.
on the first satellite. Check the signal strength indicator of the first satellite on screen. With the first satellite set at the strongest signal, select Search again to find the second satellite. • Make sure the settings are set to Two Satellites. Changing the installation settings did not solve my problem • All settings, satellites and channels are only stored at the end of the installation when you finish.
When the update is complete, the TV switches off and back on again automatically. Wait for the TV to switch itself back on. Do not press the Power switch on the TV. 25 Software To look for a software update yourself… 25.1 1 - Press and press (left) Setup. 2 - Click Update Software > Search for Updates and click Internet. Follow the instructions on screen. Update Software Update from USB 25.2 It might be necessary to update the TV software.
software. The preceding does not affect your warranties and statutory rights regarding any TP Vision Europe B.V. product(s) you purchased. It only applies to this source code made available to you. HOLDERS BE LIABLE FOR ANY CLAIM,DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OROTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USEOR OTHER DEALINGS IN THE SOFTWARE.
download site for this software is : https://github.com/julienr/libpng-androidlibpng license and/or other materials provided with thedistribution. * Neither the name of Google Inc. nor the names of itscontributors may be used to endorse or promote products derived fromthis software without specific prior written permission.
restlet (2.1.4) Restlet is a lightweight, comprehensive, open source REST framework for the Java platform. Restlet is suitable for both server and client Web applications. It supports major Internet transport, data format, and service description standards like HTTP and HTTPS, SMTP, XML, JSON, Atom, and WADL.The original download site for this software is : http://restlet.orgThis piece of software is made available under the terms and conditions of the Apache License version 2.
from any and all third party claims, liability, damages and/or costs (including, but not limited to, legal fees) arising from your use of the Software and Document, your violation of the Terms of Use or infringement of any intellectual property or other right of any person or entity.11. The Terms of Use will be governed by and construed in accordance with the laws of Hong Kong.12. Any waiver of any provision of the Terms of Use will be effective only if in writing and signed by HKSARG or its representative.
Audio Codec FLAC (1.2.1) This TV uses FLAC in libddlacodec.so.FLAC stands for Free Lossless Audio Codec, an audio format similar to MP3, but lossless, meaning that audio is compressed in FLAC without any loss in quality.The original download site for this software is : http://www.xiph.orgThis piece of software is made available under the terms and conditions of the BSD license, which can be found below. acceleration.The original download site for this software is : http://www.directfb.
http://dbus.freedesktop.orgThis piece of software is made available under the terms and conditions of GPL V2. AN ACTION OF CONTRACT,TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THESOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. EXIF (NA) Exif JPEG header manipulation tool.The original download site for this software is : http://www.sentex.net/~mwandel/jhead/Portions of this source code are in the public domainCopyright (c) 2008, The Android Open Source ProjectAll rights reserved.
MDNS Responder. The mDNSResponder project is a component of Bonjour,Apple's ease-of-use IP networking initiative.The original download site for this software is : http://w ww.opensource.apple.com/tarballs/mDNSResponder/This piece of software is made available under the terms and conditions of Apache License version 2.0. www.sqlite.org.This piece of software is made available under the terms and conditions of Apache License version 2.0.
warranty AND CONTRIBUTORS``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOTLIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED.
receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. library.
whereas the latter must be combined with the library in order to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".
Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all.
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 7. Disclaimer of Warranty.
See the License for the specific language governing permissions and limitations under the License. Greg Roelofs Tom Tanner _____________________________ libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail.
---------------------------- `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a program using the FreeType engine'.
promotional purposes without specific prior written permission. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). 25.5 Announcements You can receive an announcement on new TV software available for download or other software related issues. Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.
26 health. Specifications 26.2 Power 26.1 Environmental Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/support European Energy Label Power • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C • Standby power consumption : < 0.3W • Power saving features : Light sensor, Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu.
26.5 26.8 Display Sound Input Resolution • 3D wOOx • HD Stereo • Output power (RMS) : 30W (xxPUS7909 : 25W) • Dolby® Digital Plus • DTS Premium Sound ™ Video formats Resolution — Refresh rate • 480i - 60 Hz • 480p - 60 Hz • 576i - 50 Hz • 576p - 50 Hz • 720p - 50 Hz, 60 Hz • 1080i - 50 Hz, 60 Hz • 1080p - 24 Hz, 25 Hz, 30 Hz 26.9 Multimedia Connections • USB 2.0 • Ethernet LAN RJ-45 • Wi-Fi 802.
ESD regulations This apparatus meets performance criteria A for ESD. In case the apparatus does not recover in file sharing mode due to electrostatic discharge, user interference is required.
Support If you do not notice the flickering, the remote control might be broken or its batteries are low. This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV. 27.
Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. Choppy playback of USB files • The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback. Computer picture is not stable Make sure that your PC uses the supported resolution and refresh rate. Wrong Menu Language Wrong menu language Sound Change the language back to your language. 1 - Press . 2 - Click (left).
our colaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. 27.5 Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . Support app You can also look up the Support app in the row of Apps in the Home menu.
Never connect the TV to the power outlet if the voltage is different. 28 Safety and Care Risk of Injury to Children 28.1 Safety Follow these precautions to prevent the TV from toppling over and causing injury to children: Important • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 28.2 Screen Care • Never touch, push, rub or strike the screen with any object.
29 malfunction. Terms of Use, Copyrights and Licenses CE compliance This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/EC (EMC) and 2011/65/EU (ROHS). Compliance with EMF TP Vision Europe B.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. DTS Premium Sound ™ Microsoft PlayReady Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReadyprotected content and/or WMDRM-protected content.
Index 3 3D 46 3D Backlight Contrast 65 3D, 2D to 3D Conversion 46 3D, Health Warning 47 3D, Optimal Viewing 46 3D, Watch 46 A Accessibility 73 Accessibility, Hard of hearing 74 Accessibility, Voice Guidance 74 Age Rating 38 Ambilight Style 70 Ambilight+hue 70 Ambilight, Lounge Light 72 Ambilight, Lounge Light+hue 72 Ambilight, On or Off 70 Ambilight, Settings 70 Ambilight, TV placement 6 Ambilight, TV Switch Off 72 Ambilight, Wall Colour 71 Android OS, version 103 Announcements 102 Antenna connection 6 Ant
EasyLink HDMI CEC 11 EasyLink Settings 13 EasyLink, connection 11 Eco Settings 73 End of use 103 ESD 104 European Energy Label 103 Language, audio 42 Language, menus and essages 42 Language, original 42 Light Sensor 66 Lounge Light 72 M Game Console, connect 17 Game or Computer, setting 64 Gamepad, connect 17 Games, ideal setting 49 Gaming 49 Gamma 66 Google Chrome™ 32 Manage Apps 33 Manual Installation 78 Media 50 Media files, from a computer or NAS 50 Media files, from a mobile device 50 Media files,
Photos, view 51 Picture Format 40 Picture In Picture 48 Picture Style 64 Picture, Backlight Contrast 65 Picture, Colour 64 Picture, problems 106 Picture, Sharpness 65 Picture, Shift 40 Picture, Stretch 40 Picture, Zoom 40 PIN Code 72 Playback formats 104 Playing games 49 Pointer 25 Pointer, about 25 Pointer, speed 25 Pointer, Switch Off 26 Pointer, use 25 Power connection 6 Power consumption check 73 Problems 106 Programmes, Recommendations 31 Q Quick Picture Setting 67 Quick Settings 64 Quick Sound Settin
TV on Demand 36 TV Placement 70 TV Remote App 63 TV Speakers 69 U Unicable 79 USB Flash Drive, connect 19 USB Hard Drive, disk space 18 USB Hard Drive, Installation 18 USB Keyboard 18 USB Mouse 19 V Video on Demand 35 Video Selection 39 Video Stores 35 Videos, Photos and Music 50 Videos, Play 51 Viewing Distance 6 Visually impaired 74 Voice 26 Voice Guidance 74 W Watch 3D 46 Watch TV 37 Wi-Fi 8 Wi-Fi Certified Miracast™ 50 Wi-Fi Smart Screen 9 Widgets 32 Widgets 33 Wired Network 8 Wireless Audio 68 Wirel
Powered by TCPDF (www.tcpdf.org) Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245 Sao Paulo 2938 0245 Бълария 02 4916 273 (Национален номер) Česká republika 228880895 (Místní tarif) Danmark 3525 8314 Deutchland 0180 501 04 69 (0,14€/Min.) Ελλάδα 2111983028 (Εθνική κλήση) España 902 88 10 83 (0,10€ + 0,08€/min.
