operation manual

2
Setting Up
2.1
Read Safety
Read the safety instructions first before you use the TV.
To read the instructions, press the colour key

Keywords
and
look up
Safety instructions
.
2.2
TV Stand and Wall Mounting
TV Stand
You can find the instructions for mounting the TV stand in the
Quick Start Guide that came with the TV. In case you lost this
guide, you can download it from www.philips.com.
Use the product type number of the TV to look for the
Quick
Start Guide
to download.
2.3
Tips on Placement
• Position the TV where light does not shine directly on the
screen.
• Dim lighting conditions in the room for best Ambilight effect.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen
size. When seated, your eyes should be level with the centre of
the screen.
2.4
Power Cable
• Insert the power cable into the
POWER
connector on the
back of the TV.
• Make sure the power cable is securely inserted in the
connector.
• Make sure that the power plug, in the wall socket, is accessible
at all times.
• When you unplug the power cable, always pull the plug, never
pull the cable.
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the TV
for a long period of time.
Press the colour key

Keywords
and look up
Switching On
for more information on switching the TV on or off.
2.5
Antenna Cable
Insert the antenna plug firmly into the
Antenna
socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6
Satellite Dish
One Tuner
To watch a satellite channel and to record another channel at
the same time, you must connect 2 identical cables from your
satellite dish to the TV. If you only have 1 cable available, the
channel you are recording is the only channel you can watch.
Connect the cable from the satellite dish directly to the
SAT 1
connection. Use a coaxial cable fit for connecting a satellite
antenna dish. Make sure your satellite dish is perfectly aligned
before you start the installation.
6