User manual
Table Of Contents
7
1.6. Installing the optional table stand
1. You can order the optional table stand for this display by the Model Number: BM05922.
2. Installing process:
(1) Ensure the display is powered off.
(2) Spread a protective sheet on a ๎at surface.
(3) Hold the handles and place the display face-down on the protective sheet.
(4) Assemble the tube to the display as shown below.
(5) Insert the stand to the tube and ๎x the stand by using the thumb screw.
Table stand
Longer portions should face the front
M6xL35 screws
Thumb screws
NOTE 1:
49BDL4150D Fasten the longest screw (Length=35mm) in Hole #6 & Hole#16 of tube to ๎x it on the display.
55BDL4150D Fasten the longest screw (Length=35mm) in Hole #4 & Hole#14 of tube to ๎x it on the display.