User manual

33
Color Hotkey:
Blue: Zoom in (+10%)
Yellow: Zoom out (-10%)
OK: Restore zoom
Arrow keys:
Up/Down/Left/Right: Adjust the page. (when the page is zoomed in/
out)
Left: Previous page. (when the page is not zoomed in/out)
Right: Next page. (when the page is not zoomed in/out)
Combination key:
Number key + OK key: select a specic page and press OK key to
change the page.
- Press a number key.
- Press OK key, the page number will be shown on the bottom
side of the page. If the page number is greater than the total page
number, it will keep the current page number at the bottom side of
the page.
4.7. CMND & Play
1) Server
Setup CMND & Play server address
2) Account
Setup CMND & Play account
3) PIN Code
Setup CMND & Play PIN code
(4) Version
There are two options, Ver.2 and Ver.3
Ver. 2
use 2.0/2.2 agreement
Ver. 3
use 3.0/3.1 agreement
(5) Content
There are 3 options available: internal storage, SD card and USB
storage.
If Ver.2, is selected, Server/Account/PIN code will be shown in gray
and cannot be set.
4.8. Custom App
Set up the application for Customer Source.
Note:
(1) Only display the App installed by user.
(2) System’s pre-installed App is not displayed.
4.8.1. OSD Menu operation:
RCU: Source > Custom
If a customer APK is set, the PD will open the customer App when
switching the source to Customer mode.
If the customer APK is not set, the PD will show a black screen when
switching the source to Customer mode.
4.8.2. Function Introduction
Save
Pressing Save will perform the function of storage.
Forget
After pressing Forget, those previously stored information can be
removed.
Cancel
Cancel and close the dialog box.
If there is no customer installed APK, the list will be blank.
If the options are not available, “Save” and ”Forget” keys will be shown
in gray.
Force restart custom app
If the app is closed due to an exception, the app will be automatically
reopened.