User manual

38
2. FTP
Click the checkbox to enable/disable the FTP server feature. After
enabling this feature, les can be shared on the FTP.
1) Account
Set FTP account
Note:
Input limitation
(1) Length: 4-20 characters
(2) Format:
I. English letter: a-z and A-Z
II. Number 0-9
2) Password
Set the password for FTP.
Note:
Input limitation
(1) Length: 6-20 characters
(2) Format:
I. English letter: a-z and A-Z
II. Number 0-9
FTP password display
(1) The password are hidden under asterisks if the password is set using
the remote control.
(2) After setting, the password are hidden under asterisks.
3) Storage Path
Show default path: Internal storage.
Note:
Display the path of internal storage which is unchangeable.
4) Port
Set FTP port number.
Note:
Input limitation:
(1) Length: Max 5 characters
(2) Range: 1025 ~ 65535
(3) Format: Number 0-9
(4) Default: 2121
(5) Unavailable port: 9988, 15220, 28123, 28124 and SICP network
port.
3. Remote Control
Enable or disable the remote control.
Input the server address. If the server is not registered, you will be asked
to enter the PIN code.
Bind status:
(1) If the device does not have appropriate network connection, a
message “Network is disconnected” will appear.