49BDL5057P V1.01 www.philips.
49BDL5057P Safety Instructions Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources.
49BDL5057P Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.
9BDL5057P Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
49BDL5057P Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. (B) Important: (A) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
49BDL5057P China RoHS 电子电气产品有害物质限制使用标识要求 (中国RoHS法规标识要求) 产品中有害物质的名称及含量。 有害物质 零部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 塑料外框 O O O O O O 后壳 O O O O O O CCFL X X O O O O LED X O O O O O 电路板组件* X O O O O O 底座 O O O O O O 电源线 X O O O O O 其他线材 X O O O O O 遥控器 X O O O O O LCD panel *：电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路、连接器等。 本表格依据SJ/T 11364的规定编制。 O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 标准规定的限量要求以下.
49BDL5057P 《废弃电器电子产品回收处理管理条例》提示性说明 为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终止时，请遵守国家废弃电器电子产品 回收处理相关法律法规，将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。 娤⌈ 㨢᳸$䵥ᵥ⍿Ʋ◦䏝㯹䉭❁ᳫ濕媣ᵥ⍿⊭侻ᷘ廞ノ㒞䵽䏳ⴰㄮƲ◦店䢋⾃濕⊭侻斾堿䏦ヵ ⪷ⴰㄮ悅⊔⩜⊭圊䕂㉨㑻Ʋ 限用物質及其化學符號 單元 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr+6 ) (PBB) (PBDE) 塑料外框 ○ ○ ○ ○ ○ ○ 後殼 ○ ○ ○ ○ ○ ○ 液晶面板 － ○ ○ ○ ○ ○ 電路板組件 － ○ ○ ○ ○ ○ 底座 ○ ○ ○ ○ ○ ○ 電源線 － ○ ○ ○ ○ ○ 其他線材 － ○ ○ ○ ○ ○ 遙控器 － ○ ○ ○ ○ ○ 備考1.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。 備考2.
49BDL5057P End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
49BDL5057P Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the selling point.
49BDL5057P NOTICE SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (THIS “AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND MMD MONITORS & DISPLAYS NEDERLAND B.V., A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT PRINS BERNHARDPLEIN 200, 1097 JB AMSTERDAM, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY “MMD”).
49BDL5057P 8. Support Services. MMD is not obligated to provide technical or other support (“Support Services”) for the Software. If MMD does provide you with Support Services, these will be governed by separate terms to be agreed between you and MMD. 9. Limited Software Warranty.
49BDL5057P Open source licenses statement Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. MMD does not bear any responsibility in these sorts of situations. Third Party (Open) Source Software This product may make use of third party (open) source software and the use of this third party (open) source software may be subject to terms and conditions of such third party.
49BDL5057P Step 3: xiii
49BDL5057P Table Of Contents 1. 5.15. About...............................................................................................39 5.16. Supplementary............................................................................40 Unpacking and Installation........................................................1 1.1. Unpacking..........................................................................................1 1.2. Package Contents...........................................................
49BDL5057P 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2.
49BDL5057P 1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. Protective Sheet VESA Grid Table Tabletop stand 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
49BDL5057P 1.5. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees counter-clockwise . The “ ” logo should be on the LEFT side when facing the display. 90 90 1.5.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 1 3 2 2. Peel off the protective film at the back of the “ ” logo sticker.
49BDL5057P 1.6. Operating Instructions of Edge Alignment Kit 1.6.1. Installing Edge Alignment Kit • Using “Edge Alignment Kit-1” on adjacent two displays. • Install the “Edge Alignment Kit-1” with 2 PCS of M3 screw. • Using “Edge Alignment Kit-2” on adjacent four displays. NOTE: hen installing the edge alignment kit, please consult a professional technician for proper installation. We accept no liability for installations not W performed by a professional technician.
49BDL5057P 2. Parts and Functions 2.1. Control Panel 1 MUTE INPUT 2 3 4 5 6 7 MENU 8 9 1 [ ] button 9 Use this button to turn the display on or put the display to standby. 2 [MUTE] button 4 -- When {SCHEDULE} is enabled, the light blinks green and red ] button in the On-Screen-Display menu.
49BDL5057P 2.2. Input/Output Terminals 22 21 20 19 18 2 1 DVI-D video input. AC IN AC power input from the wall outlet. 2 13 DVI or VGA video output. MAIN POWER SWITCH Switch the main power on/off. 3 14 IR IN / 5 16 NOTES: 17 • This display’s remote control sensor will stop working if the jack [IR IN] is connected. • To remotely control your A/V device via this display, refer to page 14 for or IR Pass Through connection.
49BDL5057P 2.3. Remote Control No function. 6 2.3.1. General functions NAVIGATION buttons [ ] Root Menu: Go to Smart picture OSD. 1 Main Menu: Move the highlight bar up to adjust the selected item. IR Daisy Chain Menu: Increase controlled Group ID number. [ ] 2 Root Menu: Go to Audio source OSD. 3 12 4 13 5 Main Menu: Move the highlight bar down to adjust the selected item. IR Daisy Chain Menu: Decrease controlled Group ID number. [ 14 ] Main Menu: go to previous level menu.
49BDL5057P 2.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the ID Mode. The red LED lights up. Press the [ID SET] button again will exit the ID Mode. The red LED lights off. You can set the remote control ID when you want to use this remote control on one of several different displays. Press the digit numbers [0] ~ [9] to select the display you want to control. For example: press [0] and [1] for display No.
49BDL5057P 2.3.3. Remote Control buttons on Android source 4) Set media playlist in Boot on Source or Schedule by OSD menu. 2. Play PDF file There are 3 ways to play media files. 1) File Manager 1 Find the pdf file from the File Manager and select it to play. 2) PDF Player -> Play -> choose non-empty play list -> press to play all the PDF files in the play list. 2 3) Set pdf playlist in Boot on Source or Schedule by OSD menu. 3.
49BDL5057P 7 [ 2. For PDF file, enter the page number by pressing number buttons ] button and then press Confirm an entry or selection. 8 [ ] ADJUST button 12 1. In the content of the web page, move the focus down to the next clickable items. [ 13 [ 14 [ ][ ][ 1. ][ 2. Media Player -> Compose -> edit or new add playlist -> choose ] COLOR buttons any media files -> press : No function on Android source. These two buttons 15 2.
49BDL5057P 2.3.4. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting.
49BDL5057P 3. Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN] 3.2. Connecting a PC 3.2.1. Using DVI input PC DVI Out [DVI IN] 3.2.2.
49BDL5057P 3.2.3. Using DisplayPort input DisplayPort Out PC [DisplayPort IN] 3.3. Connecting Audio Equipment 3.3.1. Connecting an external audio device Audio In Stereo Amplifier [AUDIO OUT] 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a DVI daisy-chain configuration.
49BDL5057P DISPLAY 1 DISPLAY 2 [RJ-45] PC [RJ-45] [RS-232C OUT] [RS-232C IN] 3.4.2. Digital video connection Connect the [DVI OUT / DVI-I OUT] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 PC [DVI] [DVI IN] [DVI/VGA OUT] [DVI IN] Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 PC [DP] [DP IN] [DP OUT] [DP IN] Connect the [DVI OUT ] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2.
49BDL5057P DISPLAY 1 DISPLAY 2 PC [VGA] [DVI-I IN] [DVI-I OUT] [DVI-I IN] 3.4.4. OPS video connection Connect OPS OUT connector to HDMI1/HDMI2 connector and then select the corresponding HDMI input source for OPS video. HDMI 1/HDMI 2 IN 3.5. [OPS OUT] IR connection External IR Receiver DISPLAY 2 DISPLAY 1 [IR IN] NOTE: [IR OUT] 1. This display’s remote control sensor will stop working if the [IR IN] is connected. 2. IR loop through connection can support up to 9 displays.
49BDL5057P 3.6.
49BDL5057P 4. Operation NOTE: T he control button described in this section is mainly on the remote control unless specified otherwise. 4.1. Watch the Connected Video Source 4.2. • When you leave admin mode, system will return to last source. Settings : go to settings app. Applications : show all apps. ] SOURCE button. 2. Press [ ] or [ ] button to choose a device, then press [ Admin mode will show four icons: “Settings”, “Apps”, “Network” and “Help”.
49BDL5057P 2. Select “Play” on home page, first you should choose one playlist to play between FILE 1 and FILE 7. The pencil icon means the playlist is non-empty. 5) Cellular Network (Optional, if device has GSM/LTE module) 3. Select “Compose” on home page, first you should choose one playlist to edit between FILE 1 and FILE 7. The pencil icon means the playlist is non-empty. 6) Help page: Display QRcode page. 4. If an empty playlist is chosen, the app will guide you to select the media source.
49BDL5057P 9. Press play key after you choose desired file, you will play the media file directly. 6. Once you start to edit a playlist, you will see below screen. Source - files in storage. Playlist – files in playlist. There are 4 icons which map to the keys of remote controller. Option key – launch slide bar Play key – play media file. Info key – show media info. Ok key – select/unselect file. 6-1 In the slide bar, it helps you to do the following: - select all : select all storage files.
49BDL5057P 12. Media Hotkey Play : Playback file. Pause: Pause file. Fast forward: forward 10 second. Rewind: back 10 second. Stop: Stop file and return to start. If the gif file, it like the pause. 4.5. Browser manual 1. Home page of Browser app, this page has one item: “Settings”. Press Settings then enter next page. 13. Import text file Step 1. Create media player text file. - File name : mpplaylistX.txt, “X” means playlist number(1,2,3,4,5,6,7).Ex. mpplaylist1.txt, mpplaylist2.txt - Content : 2.
49BDL5057P 4. Press “Option” then left side will pop up a list Import : Import url list file Export : Export url list file Delete all : Delete all url record on right side Back : left side list will be closed. • Import file and url will show on list • File format for import Format should be like below with file extension “txt” 4.1 Import • Click import 4.
49BDL5057P 7. OSD menu interaction with Browser 5. Press OK then url records will be saved 7.1 Boot on source • Set OSD menu => Confiuration1 => Boot on source => Input be BROWER Play List be 0. Then PD will show Browser after reboot. • Set OSD menu => Confiuration1 => Boot on source => Input be BROWER Play List be 1. Then PD will show web page with 1st Url in Browser app. . 7.
49BDL5057P Ex. /storage/emulated/legacy/philips/bookmarklist.txt All media files should be placed in /philips/ of root directory. For example, Step 3. Start browser app, it will auto import browser text file. - pdfs in /root/philips/pdf/ Note : Once the playlist file (text) is imported, if an user change playlist by remote controller, this change will not be written to playlist text file. 4.6. PDF reader play 1. Home page of PDF Player, this page has three items: “Play”, “Compose” and “Settings”.
49BDL5057P 7. If you choose “Sort” in the slide bar, you can change the order of files one by one. 9. Import Text File Step 1. Create pdf player text file. - File name : pdfplaylistX.txt, “X” means playlist number(1,2,3,4,5,6,7). Ex. pdfplaylist1.txt, pdfplaylist2.txt - Content : Step 2. Copy pdfplaylistX.txt to “philips” folder of internal storage. You may use FTP to do this. 8. Select “Settings” on home page, this page has two parts, “Repeat Mode” and “Effect Duration”. - Repeat Mode : play mode.
49BDL5057P Cancel When Ver.3, Server/Account/PIN code is available. Don’t do any change, directly closed Windows. If no customer installed apk, the list will be blank. The list will be blank and “Save””Forget” will be gray and useless. 4.8. Custom App User can set up the application for Customer Source Note: If customer installed apk,user can select customer installed apk in list (1) Only display User Installed app. • (2) Will not show up system pre-install app. Case 1: Not set up Custom App case.
49BDL5057P 5. Signage display 5.1. Setting 5.2.1. DHCP DHCP mode: (1) Cannot modify IP Address, Netmask, DNS Address and Gateway. (2) If connect successfully, it will display current network configuration. Main items: (1) Ethernet (2) Proxy (3) Data usage (Show up when 4G module connected) (4) More (Show up when 4G module connected) (5) Signage Display (6) System Tools (7) Display (8) Storage (9) Apps (10) Security (Show up when 4G module connected) (11) Date & time (12) Developer options 5.2.2.
49BDL5057P Tethering & portable hotspot Proxy Main Switch Disable Enable Proxy settings Proxy hostname Proxy port Type HTTP Authentication Authentication Username Password Note: • Proxy type in HTTP, HTTPS, SOCKS4, SOCKS5 are support. • Only support the connection through the proxy server with TCP port 80 & 443 & 5228. • Proxy server with authentication on Windows Sever Series is not support. 5.4. Cellular networks Data usage Only show up when 4G module connected. Preferred network type 5.5.
49BDL5057P Network operators 5.6.1. General Settings Mobile plan 1. Signage Display Name Set up PD name “PD_” + Ethernet Mac Address. Note: Input limitation: (1) length: Max 36 characters (2) format: no limit 5.6. Signage Display Divide into 4 groups: General Settings / Server Settings / Source Settings / Security (1) General Settings A. Signage Display Name B. Boot Logo C. Screenshot 2. Boot Logo 1) Scalar OSD menu to control Android boot logo enable/disable (2) Server Settings A.
49BDL5057P 2) When boot logo selected, PD will check if there is bootanimzation. zip under USB and SD card. Case 3 The user settle customized boot logo, the screen will show /data/ local/bootanimzation.zip. Function introduction: a. Option description /data/local Use customized boot animation file which is copied from SD card or USB /mnt/external_sd Use boot animations file under SD card /mnt/usb_storage Use boot animations file under USB b. Save Press save key to save SD card or USB bootanimzation.
49BDL5057P 1) Interval 4)Repeat Set up interval timeframe. 30 mins or 60 mins. Set screenshot repeat cycle. User can choose screenshot time frame. (Multiple selection) 2) Start Time 5)Save to Set up screenshot start time. Set up screenshot save path. Internal storage, SD card or USB storage.) Note: (1) If no start time, the screen will show current time automatically Note: (2) Just press Back key to exit dialog for Set up picture storage path (3) Start time cannot be newer than End time.
49BDL5057P (7) Send screenshots via email After check this item, it will send screenshot to email of administrator Please refer to 6.2.1 Email notification Note: Please confirm Email setting is done. Each screenshot will be sent immediately 5.6.2. Server Settings 1. Email Notification Via Enable/Disable to control Email On/Off) After Enable, user can set up Email notification configuration.
49BDL5057P 2)Manager Email Email 2) Password Set up Receiver mail account Set up FTP password. Note: Input limitation (1) Length: 6-20 characters (2) Format: I. English a-z and A-Z II. Number 0-9 FTP password display (1) Will show “*” symbol to instead password if set up password via remote control. (2) After set up, the password text will show as “*” symbol. Before password input: 3)Test Send Test Mail To test Gmail account receive/send function.
49BDL5057P Bind status: (1) Will show network is disconnected if not yet connects to network. 3)Storage Path Show default path: Internal storage (2) Will show Server is disconnected if network connected but remote control server disconnected. Note: Can only display Internal storage, cannot be modified.(Only show path) (3) Will show Server is unbinded if Remote control server feedback unbinded status. 4) Will show Server is unbinded if Remote control server feedback unbinded status.
49BDL5057P 4. SICP Network Port 2. Browser Change SICP Network Port. Can edit Bookmark configuration. Port range is 1025~65535. (1) Open Browser setting page. 5.6.3. Source Settings 1. Media Player Can Edit Media Player play list and effect settings. 3. CMND & Play 1) Server Setup CMND & Play server address 2) Account (1) Open Media Player Player List edit page. Setup CMND & Play account 3) PIN Code Setup CMND & Play PIN code (4) Version There are two options, Ver.2 and Ver.3 Ver. 2 Use 2.0/2.
BDL5057P When Ver.2, Server/Account/PIN code will be gray and unavailable. (1) Only display User Installed app. (2) Will not show up system pre-install app. Scalar OSD menu operation RCU: Source -> Custom If set up customer APK, PD will open customer app when switch source to Customer mode. If no set up customer APK, PD will show Black screen when switch source to Customer mode. When Ver.3, Server/Account/PIN code is available. Function introduction 4.
49BDL5057P 5.6.5. Security User can select customer installed apk in list Case1. No setup Custom App 1. External Storage Screen will show available apps and focus on first app item automatically. Lock/Unlock external storage. After setup, it will show App name 5.6.6. Others 1. TeamViewer Support Enable / Disable TeamViewer support. Case2. Setup Custom App. (there is a checked circle on right) 2. Platform Web API Enable / Disable Platform Web API. 5.6.4.
49BDL5057P 5.7. System Tools System tools 4 main functions: (1) Clear Storage (2) Factory Reset (3) Import & Export (4) Clone Media Files 5.7.3. Import & Export The function of Import & Export PD settings. Notes. (1) Settings.db (Saved file name: settings.db) (2) Will save to Philips folder in storage 5.7.3.1 Export Signage Display Settings 5.7.1. Clear Storage Will export to Philips folder under USB or SD card The purpose is to clear all data in Philips folders. (1) Export settings.
49BDL5057P 5.9. Show notification dialog before database import Display User can modify the font size, can choose: Small/Normal/Large/Huge 5.8. Clone Media File 5.10. Storage Clone media file from Internal, SD or USB Philips folder. 1. The cloned folder name under Philips folder Display current PD Android storage information. (1) philips/photo Note (2) philips/music (1) User option key on RCU to show setting option (3) philips/video (4) philips/cms (5) philips/pdf (6) philips/browser 2.
49BDL5057P 5.11. Apps 5.13. Date & time Display applications information. Via Scalar OSD menu to control Auto Time On/Off. Note Note: (1) User options key on RCU to show setting option. Add new NTP server to display current server IP. 5.12. Security 5.14. Developer options Android developer options. 1. SIM card lock Setup/Disable SIM PIN code. 5.15.
49BDL5057P 5.16.2. How to custom an Android boot animation? 2. After select update.zip file, PD will restart and start to update. 3. If not found update.zip. The dialog is no content and the Ok button will be gray and useless. 1. Overview Note: (2) File name should be update.zip. The Android boot animation is used script to load PNG files when the device boots. It is contained within an uncompressed zip file called Bootanimzation.zip. (3) The file should be located in root of storage. 2.
49BDL5057P The above example, the boot animation will play at a resolution of 1920 by 1080 pixels, at a frame rate of 30 fps, starting with the contents of part0 folder and after playing them in one loop, switching to contents of part1 folder and playing them continuously till the device boot complete. Press Home key on RCU: OSD menu -> Configuration 2 -> Logo -> set “on” (3.) Press combination key “Home + 1888” on RCU to go to Admin mode: Settings -> Signage Display -> GENERAL SETTINGS -> Boot Logo 3.
49BDL5057P -- JSON sample intent.putExtra(“packageName”, “com.example.apk_name”); intent.putExtra(“activityName”, “com.example.apk_name.MainActivity”); { sendBroadcast(intent); status: "success", code: 0, 5.16.4. How to connect with platform Web API? decsription: "success", PD has a local web server to provide Web API for customer getting PD information in JSON format. result: { 1. APIs specifications "version": "1.0", -- Protocol: HTTP "currentip": "172.17.3.
49BDL5057P 6. OSD Menu 6.2. An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 6.1. 6.2.1. Picture menu Navigating the OSD Menu Picture 6.1.1.
49BDL5057P Color control Press + button to move screen to right. The color levels of red, green, and blue are adjusted by the color bars. Press - button to move screen to left. R: Red gain, G: G een gain, B: Blue gain. V position Smart picture Control Vertical Image position within the display area of the LCD. PQ setting Press + button to move screen to up. PC mode: {Standard} / {Highbright} / {sRGB}. Press - button to move screen to down. Video mode: {Standard} / {Highbright} / {Cinema}.
49BDL5057P Maximum volume H zoom Expands the horizontal size of the image only. Adjust your own limitation for the maximum volume setting. This stops the volume from being played too loudly. Minimum volume V zoom Adjust your own limitation for the minimum volume setting. Expands the vertical size of the image only. Mute Turn the mute function on/off. H position Audio source Moves the horizontal position of the image left or right. Select the audio input source.
49BDL5057P PIP position • Select the position of the sub picture in the PIP (Picture-in-Picture) mode, {Bottom-Right}/{Bottom-Left}/{Top-Right}/{Top-Left}/{Center}/ {Custom}. {Power off} - The display will remain off when the power cord is connected to a wall outlet. • {Forced on} - The display will turn on when the power cord is connected to a wall outlet.
49BDL5057P Factory reset • {On} (Default) Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP}, {Configuration1}, {Configuration2}, and {Advanced option} to the factory preset values. • {User} Android settings will also reset when factory reset. 2. If Log set to OFF, neither scalar Philips logo nor android animation logo will not show. 1. If Logo set to ON, both scalar Philips logo and android animation Philips logo will show.
49BDL5057P 6.2.7. Advanced option menu Monitor information Shows information about your display, including model number, serial number, operating hours and software version. Configuration 2 Advanced option DP version DisplayPort support mode.
49BDL5057P and 15-sets on the horizontal sides). This function requires a daisy-chain connection. put forward 1 hour at 2 o’clock. At daylight stop date the clock should be put back 1 hour at 2 o’clock. • The existing daylight on/off menu item should be replaced with the following menu structure: Switch on delay: Set the power-on delaying time (in seconds). The default option {Auto} allows a sequential powering-on for each display by their ID number when multiple displays are connected.
49BDL5057P 2 Power Save Power-off schedule: Press [ ] or [ ] button to set the hour and minute for the display to turn off. Mode 1 [TCP off, WOL on, auto off] Select or leave an empty “__” for both the hour and minute slot if you do not want to use this power-on or power-off schedule. 3 Mode 2 [TCP off, WOL on, auto on/off] Mode 3 [TCP on, WOL off, auto on/off] Input-source selection: Press [ ] or [ ] button to select an input source.
49BDL5057P OPS setting Set OPS status. • {Always off} - Disable OPS • {Always on} - Enable OPS (Default) * OPS model only Advanced option reset Reset all settings except {Date and Time} in the Advanced option menu to factory preset values. 1. Press [OK] or [ ] button to enter the submenu. 2. Press [ ] or [ ] button to select {Reset} and press the [OK] button to restore settings to factory preset values. ] button or select {Cancel} and press the [OK] button 3.
49BDL5057P 7. USB device compatibility USB Multimedia Codec Formats Video Decode Type Video Codec Container Decode Encode Channel Remark Supported Image Size:48x48pixels to 1920x1088pixels MPEG1/2 MPEG1/2 File Format: DAT, MPG, VOB, TS Maximum Frame Rate:30fps V Maximum Bit Rate:80Mbps Audio Codec: MP2, MP3 Supported Image Size:48x48pixels to 1920x1088pixels Maximum Frame Rate:30fps MPEG-4 MPEG4 File Format: AVI, MKV, MP4, MOV, 3GP Maximum Bit Rate:38.
49BDL5057P JPEG JFIF file format 1.
49BDL5057P 8. Input Mode VGA Resolution: Standard Resolution Active Resolution H Pixels V Lines VGA 640 480 WVGA 720 400 SVGA 800 600 XGA 1024 768 WXGA WXGA SXGA WXGA UXGA HD1080 1280 1280 1280 1360 1600 1920 768 800 1024 768 1200 1080 Refresh Rate Pixel Rate 60 Hz 72 Hz 75 Hz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 25.175 MHz 31.5 MHz 31.5 MHz 33.75 MHz 40 MHz 49.5 MHz 65 MHz 78.75 MHz 79.5 MHz 79.5 MHz 108 MHz 85.5 MHz 162 MHz 148.
49BDL5057P 9. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
49BDL5057P 9.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 9.5. Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
49BDL5057P 10. Cleaning and Troubleshooting 10.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
49BDL5057P 10.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
49BDL5057P How is the RC working? Daisy chain : no RS232 connected and IR cable No need setting, just to connect with IR cables and control by IR. *This way has out-of-synchronizm phenomenon. Suggest to use above setting with RS-232 cable.
49BDL5057P 11. Technical Specifications Display: Item Specifications Screen Size (Active Area) 1232.00 mm (48.5’’ diagonal) Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.55926 (H) x 0.55926 (V) [mm] Displayable colors 10 bits(D), 1.
49BDL5057P General: Item Specifications Power Input 100 - 240V~, 50 - 60Hz, 5.5A Power Output 100 - 240V~, 50 - 60Hz, 2.5A Power Consumption (Max) 240 W Power Consumption (typ.) 95 W Power Consumption (Standby & Off) <0.5 W (RS232 in active) Dimensions (Without Stand) [W x H x D] 1092.8 x 623.0 x 71.1 mm Weight (Without Stand) 19.0 Kg Gross Weight (Without Stand) 24.9 Kg Product Fiche : Item Specifications Energy Efficiency Class B Visible Screen Size 123.2 cm / 48.
2017 © Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
