Software Upgrade

ManualsBrandsPhilips Manuals4K Ultra HD5000 series Smart Ultra HDTV

Philips TV Firmware Upgrade

(w/USB Drive)

Please read the instructions before downloading the software.

Applicable Televisions

43PFL5603/F7, 43PFL5703/F7, 50PFL5603/F7, 50PFL5703/F7, 50PFL5903/F7,

55PFL5603/F7, 55PFL5703/F7, 55PFL5903/F7, 65PFL5603/F7, 65PFL5703/F7,

65PFL5903/F7, 75PFL5603/F7

Getting Started

1. Please read the entire instructions before performing the upgrade.

2. The USB drive you use for the upgrade needs to meet the following criteria:

a. USB drive size should be 528 MB or larger.

b. USB drive should be clean formatted for FAT32 before you start the process.

c. Drives with U3 software are not supported. The U3 uninstall tool can be found

here. http://u3.sandisk.com/launchpadremoval.htm

3. Most modern computers (operating systems) usually have Zip File extraction tools

built-in, but in case yours does not, you can download and install 7-Zip or any other

extraction tool to extract the Firmware Upgrade Package. 7-Zip can be found here:

http://7-zip.org/download.html

Checking Software

Before loading the software on your TV, verify that the version you are loading is greater

than the on that is on your TV.

Press the Menu button on the remote, then Setup. Cursor down and to the right to

Software settings. Press the OK button and then cursor right to Software information.

The software version for this update is:

UNI-0V0KU_216_0

If your TV has this version, you do not need to upgrade.

Summary of content (5 pages)

PAGE 1
Philips TV Firmware Upgrade (w/USB Drive) Please read the instructions before downloading the software. Applicable Televisions 43PFL5603/F7, 43PFL5703/F7, 50PFL5603/F7, 50PFL5703/F7, 50PFL5903/F7, 55PFL5603/F7, 55PFL5703/F7, 55PFL5903/F7, 65PFL5603/F7, 65PFL5703/F7, 65PFL5903/F7, 75PFL5603/F7 Getting Started 1. Please read the entire instructions before performing the upgrade. 2. The USB drive you use for the upgrade needs to meet the following criteria: a. USB drive size should be 528 MB or larger. b.
PAGE 2
Loading Software 1. Down the software, unzip the file and load the *.upg file to the root directory of your USB drive. An example of the root directory would be E:\ 2. Insert the USB drive into the TV. 3. Press the Menu button . Cursor right to Setup and press the OK button. SCREEN CAST 4. Cursor right to Update software and press OK.
PAGE 3
5. Select USB and press OK. 6. Select the update file on the USB drive. 7. Select Yes to proceed.
PAGE 4
8. Wait while the file is being loaded. Do not remove the USB drive or turn the TV off. 9. When the box below appears, turn the TV Off and back On. 10. The following box will appear. Do not turn the TV Off until the process is complete. In some cases, the screen may go black during this process. If the screen below does not appear and the power light stays on, do not unplug the set. The set will respond to the remote when the update is complete.
PAGE 5
Software History Version Date Problem UNI-0V0KU_213_0 07/03/18 > Corrects image loss when exiting VEWD apps.