Operation Manual

86 Operator services
To receive a second call, you must have:
- subscribed to this feature,
- deactivated the Call forward option for voice calls (see
page 75),
- activated the Call waiting option (see page 76).
If you receive a second call, press
,
, then you can:
accept the second call: the first one is put on hold,
the second one is active. If you want to toggle
between the two calls, press
,
then select
Switch
calls
. Each time you toggle from one call to
another, the active call is put on hold and the call
which was on hold is then activated. To introduce
the new caller into a conference press
,
and
select
Conference
.
reject the second call
end the active call, then your incoming call is
ringing.
Notes:
- If you also wish to answer the incoming call, press
(
; to reject it, press
)
.
- If you have activated call forwarding ‘If Busy’ (see
“Call forward” page 75), you will never receive second
calls since they are always forwarded when the line is
busy.
Answer a third call
Subscription dependent
While in communication and one call being on hold,
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is lim-
ited to two current communications (one active and
one on hold).
Conference call
Subscription dependent
You can activate the conference call by
making consecutive outgoing calls, or
create it from a multiparty call context.
You may have up to five members at the same time and
end the conference with
)
. At this point all calls are
disconnected.
In order to make consecutive outgoing calls, first initi-
ate a normal call with the first number of the confer-
ence. When the first member is on line, initiate a
second call as described in “Make a second callabove.
When the second call is engaged, press
,
and select
Conference
. Repeat the above process until five mem-
bers are connected.
Conference
Philips530_Europe_GB_4311 255 55021.book Page 86 Vendredi, 11. juillet 2003 11:01 11
Downloaded from www.Manualslib.com manuals search engine