User manual

55BDL1005X
37
How to setup the settings in the menu
to control all the monitors at the same
time and individually via RC?
DaisychainedbyRS232andnoIRcable 1.Therstdisplaysetsas“Primary”onOSD(Advanced
option/IRcontrolitem),otherssetas“Secondary”.
2.ThesetupOSDwillshowonTop-Leftofdisplay.(Toggle
MENUwillshowagainifitdisappear)
3.Defaultsetting:IDNO:0,GPNO:0,thissettingcan
controlalldisplaysbyIR.
The“+”,“-”canchange“IDNO”tocontrolsignal
displayby“MonitorID”.
The“UP”,“DOWN”canchange“GPNO”tocontrol
multi-displayby“GroupID”.
*TherstdisplayalwaysbecontrolledbyIR.
How is the RC working? Daisychain:noRS232connectedandIRcable Noneedsetting,justtoconnectwithIRcablesand
controlbyIR.
*Thiswayhasout-of-synchronizmphenomenon.Suggest
touseabovesettingwithRS-232cable.