Register your product and get suppor t at www.philips.
Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 Tour 3 Smart TV 3 App gallery 3 Rental videos 3 Online TV 3 Social networks 3 Skype 4 Smartphones and tablets 4 Pause TV and recordings 4 Gaming 4 EasyLink 5 7.2 7.3 7.4 7.5 7.6 7.7 7.8 Start Skype 68 Contacts 69 Calling on Skype 70 Skype Credit 71 Skype settings 71 Sign out 72 Terms of Use 72 8 8.1 8.2 Games 73 Play a game 73 Two-player games 73 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.
1 Tour 1.1 Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the TV with your tablet.
1.5 Social networks No need to get up to check your friend's messages on your computer. Open Smart TV, select your social network page and send a message back from your couch. Operate your TV from your smartphone or tablet, switch channels or change the volume. With the MyRemote app, you can use your phone or tablet to send photos, music or videos from your computer to your TV.
The TV uses 3D technology to show both screens. To play a two-player game with two different full screen pictures, you need a pair of 3D glasses for each player. In Help, press * List and look up Game console or Twoplayer games for more information. 1.10 EasyLink With EasyLink you can operate a connected device, like a Bluray Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected devices. In Help, press * List and look up EasyLink for more information.
2 To fix the TV on the bracket securely, use a screw length as shown in the drawing. Setting up 2.1 On the floor or on the wall Standing on the floor Warning Always use the supplied wall bracket to secure the TV from falling over. Mount the bracket and secure the TV onto the bracket, even if you put the TV on the floor. With the same bracket you can place the TV slanting, like it is leaning against the wall or place the TV straight up - parallel to the wall.
2.4 Antenna Locate the antenna connection at the back of the TV. Insert the antenna cable securely into the Antenna a socket. You can connect your own antenna or connect to an antenna signal from an antenna distribution system (common in certain regions). Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals. File sharing The TV can find and open files on other devices in your wireless network, like your computer or NAS device.
Step 7 - Depending on the type of router, you can now enter your encryption key (WEP, WPA or WPA2). If you entered the encryption key for this network before, you can select Next to make the connection immediately. If your router supports WPS or WPS pin, you can select WPS, WPS pin or Standard. Select your choice and press OK. - Standard Select Standard to enter the encryption key (password, passphrase or security key) manually. You can use the keyboard on the RC to enter the encryption key.
View network settings All current network settings are shown here. The IP and MAC address, signal strength, speed, encryption method, etc. Network type Sets the network to Wired or Wireless. Network configuration Sets the network configuration to DHCP & Auto IP or Static IP. Antenna If you have a Set-top box (a digital receiver) or Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or Recorder first before it enters the TV.
HDMI ARC All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel). If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately. In the EasyLink settings menu, select EasyLink Remote Control and select Off. EasyLink setup The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.
Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV. Use the Common Interface slot on the TV to insert the CAM card*. Gently insert the CAM as far as it will go and leave it in the slot permanently. It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV.
Alternatively, you can use a SCART cable if the device has no HDMI connection. With recent Philips Home Theatre Systems, the audio to video sync is automatically synchronised and always correct. HDMI ARC If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection.
3 - If the volume difference is large, select More. If the volume difference is small, select Less. 4 - Press b, repeatedly if necessary, to close the menu. Audio Out leveling affects both the Audio Out - Optical and HDMI-ARC sound signals. Troubleshooting Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.
USB Hard Drive What you need If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar). To pause To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 32GB Hard Drive space. To record To pause or record a broadcast, you need a Hard Drive with a minimum of 250GB Hard Drive space. 2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel, press p (Pause).
- Enter  = OK - Backspace z = delete character before cursor - Arrow keys = navigate within a text field - To switch between keyboard lay-outs, if a secondary lay-out is set, press the Alt + Shift keys simultaneously.
Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. In Help, press * List and look up Videos, photos and music for more information on viewing photos. Camcorder You can use an HDMI, YPbPr or SCART connection to connect your camcorder. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection.
In Help, press * List and look up the topic or setting you need. Headphones You can connect a set of headphones to the H connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. To adjust the volume . . . 1 - Press o OPTIONS and select j Picture and sound in the menu bar. 2 - Press v (down) and select Headphones volume and press OK. 3 - Press u (up) or v (down) to adjust the volume. 4 - Press b, repeatedly if necessary, to close the menu.
Risk of electric shock or fire! Network settings In Help, press * List and look up Network, settings, for more information. Update software In Help, press * List and look up Software, Internet update or Software, USB update, for more information. Software settings In Help, press * List and look up Software, current version, for more information. Watch demos With Watch demos in the Setup menu, you can watch some demonstration videos of some of the picture quality features of your TV.
Risk of overheating! Never install the TV in a confined space. Always leave a space of at least 10 cm or 4 inches around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable.
3 TV 3.1 Switch on Switch on and off Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the small key A on the right side of the back of the TV to put the TV in standby - the red indicator will light up. With the TV in standby, press A on the remote control to switch the TV on. Alternatively, you can use the CH+, CHand h key to switch the TV on. Quick start With Quick start, the TV can start up faster than usual.
Top To navigate up, down, left or right. 8 - o OPTIONS To open or close the Options menu. Bottom 1 - A Standby To switch the TV on or back to standby. 2 - Playback and record keys • Play x, to playback • Pause p, to pause playback • Stop q, to stop playback • Rewind !, to rewind • Fast Forward ‹,to wind fast forward • Record r, to record now 3 - GUIDE To open or close the TV guide. 4 - c SOURCE To open or close the list of connections. 5 - 3D To open or close the 3D menu.
5 - Enter - To confirm the text you entered. 6 - Backspace - Deletes the character in front of the text cursor. 7 - Ω Special character - To open the onscreen keyboard to select accented letters or symbols. 8 - Azerty letter - Letters available if the keyboard layout is set to Azerty in the Setup menu. * Your remote control has a Qwerty / Azerty or a Qwerty / Cyrillic keyboard, depending on your region.
Pointer About pointer Instead of navigating the screen with the arrow keys, you can use the pointer. You can move the pointer - a blue arrow over the TV screen by moving the remote control. Just like you move the cursor on a computer screen with a mouse. You can use the pointer to navigate Smart TV Apps* and Internet pages on TV. Some Smart TV Apps might not support the use of the pointer. When the pointer is not available, you can use the arrow keys to navigate the screen.
Pairing again You can pair another remote control with this TV. The method to pair a remote control is different for a remote control already paired with another TV compared with a remote control that is not paired yet. • The remote control is paired with another TV To pair, hold the Remote control close to the Philips logo (about 10cm) and press the * Red and * Blue key at the same time. A message will appear if pairing is successful.
Radio channels If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel. A Cable (DVB-C) channel installation usually places radio stations from channel number 1001 onwards. Options on channels While watching a channel, depending on the type of channel (analogue or digital) you are watching or depending on the TV settings you made, some options are available.
In Help, press * List and look up Favourite channels for more information. Favourite channels Channel logos In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off. To switch off Channel logos . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > General settings > Channel logos and press OK. 3 - Select Off and press OK. 4 - Press b, repeatedly if necessary, to close the menu.
Child lock To prevent children from watching a channel or a programme, you can lock channels or lock age rated programmes. Lock a channel You can lock a channel to prevent children from watching it. To watch a locked channel you need to enter the Child lock code. To lock a channel, while watching a TV channel, press L LIST to open the Channel lists. In any list, select the channel you want to lock, press o OPTIONS and select Lock channel. In a channel list, a locked channel is marked with a lock ¬.
2 - Select TV settings > General settings > Reinstall TV and press OK. The installation may take a few minutes. Follow the instructions on screen. Factory settings Factory settings sets the TV back to the original TV settings for picture, sound and Ambilight. To switch back to the original Factory settings . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > General settings > Factory settings and press OK. 3 - Press OK to confirm. 4 - Press b, repeatedly if necessary, to close the menu.
In some countries, different TV channels (broadcasters) might have the same channel number. While installing, the TV shows the list with channel number conflicts. You need to select which TV channel you want to install on a channel number with multiple TV channels. DVB-T + DVB-C If you can use a DVB-T antenna input but also a DVB-C input, you can set up your TV for both DVB-T and DVB-C. Install one system followed by the other with the necessary settings.
The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK. To enter a specific digital frequency yourself, use the remote control digit keys. Alternatively, select the frequency, position the arrows on a number with w and x and change the number with u and v. To check the frequency, select Search and press OK.
The TV makes a list of the last 10 Text pages you opened. You can easily reopen them again in the Favourite Text pages column. 1 - In Text, select the star in the top left corner of the screen to show the column of favourite pages. 2 - Press v or u to select a page number and press OK to open the page. You can clear the list with the option Clear favourite pages. Search Text You can select a word and scan Text for all occurrences of this word. Open a Text page and press OK.
2 - Select TV settings and select General settings > HbbTV and press OK. 3 - Select On and press OK. 4 - Press b, repeatedly if necessary, to close the menu. If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only. 1 - Tune to the channel of which you want to block the HbbTV pages. 2 - Press o OPTIONS and select HbbTV on this channel and press OK. 3 - Select Off and press OK.
To search for programmes by genre, press o OPTIONS and select Search by genre. Select a genre and press OK. A list with the found programmes appears. Recordings From the TV guide, you can instantly record or schedule a recording of a TV programme. To store the recordings, connect a USB Hard Drive to the TV. From this Source menu, you can switch to a device. Source menu To open the Source menu, press c SOURCE.
The device should be connected with an HDMI cable and both TV and device must have HDMI CEC switched on. Home Theatre System You can switch on your Home Theatre System to listen to an audio disc or a radio channel and leave the TV in standby. To only switch on the HTS, with the TV in standby, press c SOURCE on the TV remote control. EasyLink With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC to communicate with the connected devices.
Clock To know what time it is, press GUIDE to find the time in the TV guide. Original language If the digital channel holds the original language of a programme or movie, you can set the TV to automatically switch to that audio language. Set Original language to On to watch a dubbed movie in its original language (if the original language is available). To set Original language . . . 1 - Press h, select Setup and press OK. 2 - Select Channel settings and select Languages > Original language and press OK.
Adjust a Picture style To adjust a Picture style . . . 1 - Select the style and press OK. 2 - Press h, select SSetup and press OK. 3 - Select TV settings, navigate to the individual setting and adjust it. 4 - Press b to close the menu to store your setting. To return to the original Picture style values . . . 1 - Press h, select SSetup and press OK. 2 - Select TV settings > Picture > Picture style and select the style you want to reset. 3 - Press *Reset. The style is reset.
Clear LCD With Clear LCD, you switch on a superior motion sharpness, better black level, high contrast with a flicker-free, quiet image and a larger viewing angle. To switch on or off . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Picture > Perfect Pixel HD > Clear LCD. 3 - Press x (right) and select On or Off. 4 - Press b, repeatedly if necessary, to close the menu. Super resolution With Super resolution, you switch on a superior sharpness in line edges and contours.
3 - Press x (right). 4 - Select a setting with the arrow keys. (WP is white point and BL is black level.) 5 - Press OK to confirm a setting. You can also select one of the presets in this menu. 6 - Press b, repeatedly if necessary, to close the menu. Video contrast With Video contrast, you can decrease the range of the video contrast. If you are watching 3D pictures, this setting is switched to 3D video contrast. Video contrast and 3D video contrast are settings intended for expert users.
To set the TV to Shop location . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > General settings > Location and press OK. 3 - Select Shop and press OK. 4 - Press b, repeatedly if necessary, to close the menu. ISF Calibration Get the most out of your HD TV display with ISF® Calibration. You can ask an ISF calibration expert to come to your home and set the TV to the most optimal picture setting. Additionally the expert can set an ISF Calibration for Ambilight.
Surround mode With Surround mode, you can set the sound effect of the TV speakers. If you select Incredible surround for 2D viewing, the TV will switch to Incredible surround 3D automatically when you start watching 3D. If you do not want the TV to switch automatically, select Off in Auto incredible surround 3D. To set the surround mode . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Sound > Surround mode.
Audio Out format With Audio Out format you can set the audio out signal of the TV to fit the sound processing capabilities of your Home Theatre System. For more information, press * LIST and look up Audio Out format. Audio Out leveling With Audio Out leveling you can level the sound volume of the Home Theatre System with the volume of the TV when you switch over from one to another. For more information, press * LIST and look up Audio Out leveling.
5 - Select Close and press OK. 6 - Press b, repeatedly if necessary, to close the menu. ISF warm white With ISF warm white, you can ask an ISF expert to calibrate a static Ambilight colour next to the ISF picture calibration. ISF warm white must be selected in the Ambilight mode menu. To select the ISF warm white mode . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Ambilight > Mode. 3 - Select ISF warm white. 4 - Press b, repeatedly if necessary, to close the menu.
In Help, press * List and look up Universal access for more information. 3 - Select On or Off and press OK. 4 - Press b, repeatedly if necessary, to close the menu. Speech Visually impaired Switch on Digital TV channels can broadcast special audio commentary describing what is happening on screen. To be able to set the visually impaired audio and effects, you have to switch on Audio description first. Also, before you can switch on Audio description, you have to switch on Universal access.
4 Satellite channels 1 - In the channel list, select t or Ò in the menu bar to select the TV or Satellite channel list. 2 - Select a list - All, Favourites, Radio or New. 3 - Select a channel in any of the lists and press OK. The TV will tune to the selected channel. 4.1 Watching satellite channels To watch satellite channels, press h, select Satellite and press OK. The TV tunes to the satellite channel you last watched. Change channel To change channels, press CH+ or CH-.
There are two favourite lists, one for TV channels and one for satellite channels. 4.4 Lock satellite channels Set up your favourites list To compose a list of your favourite channels . . . 1 - While watching a channel, press L LIST to open the channel list. 2 - In the menu bar, select t for TV or Ò for satellite channels. 3 - Select the Favourites list. 4 - The TV will ask you to start adding channels immediately. Press OK.
Forgotten your Child lock code? If you forgot your code, you can override the current code and enter a new code. 1 - Press h, select S Setup and press OK. 2 - Select Satellite settings > Child lock > Change code and press OK. 3 - Enter the overriding code 8888. 4 - Now enter a new Child lock code and enter it again to confirm. 4.5 4c - If the exact number of satellites is set or you completed the Unicable settings, select Search and press OK.
Unicable setup The Unicable system You can use a Unicable system to connect the antenna dish to the TV. A Unicable system uses one cable to connect the satellite dish to all satellite receivers in its system. Unicable is typically used in apartment buildings. If you use a Unicable system, the TV will ask you to assign a user band number and corresponding frequency during the installation. You can install 1 or 2 satellites with Unicable on this TV.
2 - Press * Rename. You can enter text with the remote control keyboard or open the on-screen keyboard. With the remote control keyboard To delete a character, position the cursor behind the character and press # del. To enter a character, press the character on the keyboard. When you are ready, press Enter to select Done. Press Enter again to finish renaming. For more information on using the keyboard, press * LIST and look up Remote control, keyboard.
If Universal access does not appear in the Options menu, switch on Universal access in Setup. In Help, press * List and look up Universal access for more information. Audio description Switch on Digital TV channels can broadcast special audio commentary describing what is happening on screen. To be able to set the Audio description audio and effects, you have to switch on Audio description first. Also, before you can switch on Audio description, you have to switch on Universal access.
• If you use a Unicable system, make sure you assigned a unique user band number to the satellite receiver in the Unicable settings. It might be that another satellite receiver is using the same user band number. Some satellite channels seem to have disappeared from the channel list. If some channels seem to be gone or displaced, the broadcaster might have changed the transponder location of these channels. To restore the channel positions in the channel list, you can try an update of the channel package.
Active 3D glasses PTA509 5 3D Active 3D glasses PTA509 5.1 What you need This is a 3D Max TV. On this TV, you can watch 3D programmes and movies in full High Definition resolution with 3D Max. To watch 3D you need to : • tune to a TV channel that broadcasts programmes in 3D • rent a movie in 3D from an online video store with Smart TV • watch a movie in 3D from a 3D Blu-ray Disc, a USB device or computer Also, to watch 3D on this TV, you will need one of these types of Philips 3D Max active glasses. .
Two-player gaming Two-player gaming You can use these glasses to play two-player games. Two players can watch the same TV but see two different screens to play a game. To switch the glasses to watch the Player 1 or Player 2 screen, switch on the glasses and then press the Player 1/2 key. • If the LED light is orange and lits continuously for 2 seconds, the glasses are set for player 1. • If the LED light is orange and blinks, the glasses are set for player 2.
You can change the depth of 3D for a weaker or stronger 3D effect in the 2D to 3D conversion. To change the 3D depth, press oOPTIONS and select 3D depth. Select Off (no 3D), Less (less 3D depth), Normal (optimal 3D quality) or More (more 3D depth). 5.4 Optimal 3D viewing For an optimal 3D viewing experience, we recommend that you: • sit at least 3 times the height of the TV screen away from the TV, but no further than 6 meters away.
6 6.2 6.1 What you need Smart TV Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. Open the Home menu To open the Home menu, press h. Select an activity using the arrow keys and press OK to start the activity.
Open Smart TV To open the Smart TV start page, press Smart TV. Alternatively, you can press h, select Smart TV and press OK. Enter a keyword in the text field, select l and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories. In the list of found keywords, select a keyword and press OK to search for items with that keyword.
To return to the Smart TV start page, press L LIST or b. Add an App to your list In the App gallery, select the App icon and press OK. Select Add and press OK. Alternatively, select Add and move to add it and immediately position the App where you want it in your list. Start an App To start an App, press h and select Smart TV. On the start page, select an App icon and press OK. In an App, press b to go back 1 step or page.
If you try to pause or record a programme with a USB Hard Drive connected, the TV will ask you to format the USB Hard Drive. This formatting will delete all current files on the USB Hard Drive. From a computer If the TV and the computer are in the same network, the TV can browse and play files stored on your computer. On your computer, you need to install media server software like Twonky™ to share your files with the TV. The TV shows your files and folders as they are organised on your computer.
To view info on a video (playhead position, duration, title, date, etc.), select the video and press i INFO. Press again to hide the info. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. Options Press o OPTIONS. - Subtitles If available, you can switch subtitles On, Off or On during mute. - Shuffle Plays your videos randomly. - Repeat Plays a video once or continuously.
2 - On the device, open an application such as Wi-Fi Miracast, Wi-Fi Direct™, Intel®Wireless Display* or similar and start scanning for other Miracast devices. 3 - In the list of found devices, select the TV and connect. 4 - On the TV, agree to the request to connect to the TV. You might be asked to enter a PIN code from the device on the TV - enter the numbers with the digit keys on the remote control. Alternatively, you might be asked by the TV to enter a PIN code on the device.
To switch on Switch on with Wi-Fi, press h, select S Setup and press OK. Select Network settings > Switch on with Wi-Fi and select On and press OK. If all conditions on both TVs are met, you can use Multi room. Using Multi room First time use When you start Multi room for the first time, switch on both TVs. Once this TV made a connection with the other TV, the other one will appear automatically in the Browse network menu even when it's in standby. 6.
• You can buffer the digital (DVB) subtitles of a channel. You cannot buffer subtitles that come from Text services. To check if digital (DVB) subtitles are available, tune to the TV channel and press o OPTIONS, select L Options in the menu bar and select Subtitle language to open the list of Subtitles. You can only buffer a subtitle language preceded with a DVB icon. 6.6 Recording Record a programme To change the date of the list, press o OPTIONS and select Select day.
In the list, select the recording and press x (Play) to start the playback. You can use the ‹ (Forward), ! (Rewind), p (Pause) or q (Stop) keys on the remote control. It's free You can download the MyRemote App for free. If you want to add the functions Wi-Fi smart screen, a small cost may apply. Expired recording Broadcasters can limit the number of days a recording can be viewed. A recording in the list can show the number of days before it expires.
5 - Press b, repeatedly if necessary, to close the menu. Home network Switch on with Wi-Fi - WoWLAN You can switch this TV on from your smartphone or tablet if the TV is in standby. The setting Switch on with Wi-Fi (WoWLAN) must be set to On. To switch this setting on . . . 1 - Press h and select S Setup and press OK. 2 - Select Network settings > Switch on with Wi-Fi (WoWLAN). 3 - Select On and press OK. 4 - Press b, repeatedly if necessary, to close the menu.
Select a media file Some devices that send files offer them by type of media. If so, you can select the type of media you are looking for - Music, Videos or Photos. 1 - Tap the type of media you are looking for. 2 - In the list, tap the song, video or photo to play it on the device you selected. Compatible media formats A wide range of media formats can be played on your TV. App menu From the MyRemote App menu, you can start the different MyRemote App functions. Simply tap a function to open it.
2 - Press the * (yellow) key to open the list of detected mobile devices. 3 - Select Link a mobile device and press OK to view the code to link up. 4 - On the mobile device, start the MyRemote App and tap the Setup button on the home menu. 5 - Tap the TV guide item. 6 - Enter the code to link up. The MyRemote recording setting Make sure this setting is switched on to schedule a recording. 1 - Press h and select S Setup and press OK. 2 - Select Network settings > MyRemote recording.
To switch TV channels, swipe the touchscreen of your smartphone or tablet. Swipe to the right to watch the previous channel or swipe to the left to watch the next channel. The sequence of channels follows the TV channel list. You can also use the Channel bar to look for and switch to TV channels. Pause TV and Recording If you pause the TV broadcast on TV or start recording a broadcast with the TV (on a connected USB Hard Drive), the Wi-Fi smart screen function will stop.
7 Skype 7.1 What is Skype? With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world. Talk to your friends while watching them on the big screen of your TV. Point the camera to the position you usually sit at. In the Skype settings, you can test the camera, check its viewpoint or set the zoom level. You can position the camera anywhere you want but it is recommended to put it away from the speakers of the TV.
You can edit or complete your Skype profile on your computer. Start Skype on your computer, sign in with your Skype Name and Password and open your Skype profile. You can change your profile picture, add a mood message or set the privacy settings. - Do not disturb Your contacts can see that you are online but you do not wish to be disturbed. They can call you and you will be alerted with sound.
Block a contact You can block any Skype user from finding you online. A blocked contact will be unable to contact you with Skype. A blocked contact will not be notified, you will always appear to be offline in the contact list of the blocked contact. On the ∂ Contacts page, select a contact and press * Block contact. You can always unblock a contact. To unblock, select the contact in the list and press * Unblock contact. In the list of contacts a blocked contact has this icon.
Skype during rental movies and Pause TV While you are watching a rental movie from a broadcaster or video store, or using Pause TV, accepting a Skype call will interrupt the movie or paused programme. To resume watching the rental movie, you need to go back to the video store or broadcast service. Some video stores and services do not allow you to restart the movie. The Pause TV programme storage is lost.
Navigate to the menu bar and select S Settings to open the Settings page. Select Online status and then select the online status you want your contacts to see when you are online and press OK. 7.7 Sign out Navigate to the menu bar and select S Settings to open the Settings page. Select Sign out to quit Skype on your TV. Ringtone volume You can adjust the Skype ringtone volume. 7.8 Navigate to the menu bar and select S Settings to open the Settings page.
Also, the game console must be connected with HDMI. 8 Games 8.1 Play a game With a game console connected to the TV, you can play games on TV. Start a game Switch on the game console and press h, select the icon you have set for your game console (e.g. Game or Player) and press OK to view the game. Ideal game setting For some games, where speed and precision is needed, set the TV to the ideal Game setting before you start playing.
9 To check the relative power consumption, press h > Setup > Watch demos > Active control and press OK. Select a setting to check the corresponding values. 9.1 European energy label TV Specifications Environmental Saving energy Energy saving bundles the TV settings that help the environment. While you are watching TV channels, press * to open Eco settings. Active settings are marked with a fi. Press * again to close.
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.
Playback formats • Containers : 3GP, AVCHD, AVI, DivX®, MPEG-PS, MPEGTS, MPEG-4, Matroska (MKV), Quicktime (MOV, M4V, M4A), Windows Media (ASF/WMV/WMA) • Video Codecs : DivX®, MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4 Part 10 AVC (H264), VC-1, WMV9 • Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB, Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital Out™, MPEG1/2/2.5 Layer I/II/III (includes MP3), WMA (v2 to v9.
10 TV Software 10.1 Software version To view the current TV software version, press h, select S Setup and press OK. Select Software settings and press OK. Select Current software info and see Version: . . . . 10.2 Software update Software update from Internet If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you carry out the update. Select Update.
11 Support 11.1 Register Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. Go to www.philips.com/welcome 11.2 Using help and search On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs).
12 Copyrights and licences 12.5 DLNA Certified® 12.1 HDMI HDMI® The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 12.2 Dolby Dolby® Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. © 2013 Digital Living Network Alliance. All rights reserved. © 2013 DLNA. All rights reserved. 12.
12.8 Wi-Fi Alliance Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance. 12.9 MHEG software The copyright in MHEG software ("the Software") comprised in this television ("this product") and included to enable you to use interactive television features is owned by S&T CLIENT SYSTEMS LIMITED ("the Owner"). You are permitted to use the Software only in conjunction with this product. 12.
Index 3 3D glasses PTA508, use 52 3D glasses, type 52 3D, 2D to 3D 53 3D, battery of the glasses 53 3D, cleaning the glasses 53 3D, health warning 54 3D, optimal viewing 54 A Active control 19 Ambilight, brightness 42 Ambilight, dynamic speed 42 Ambilight, ISF 43 Ambilight, mode 42 Ambilight, on or off 42 Ambilight, static colour 42 Ambilight, TV placement 6 Ambilight, TV switch off 43 Ambilight, wall colour 43 Amplifier 41 Antenna connection 7 Antenna connection, tips 9 App, feedback 56 App, gallery 56 App
Internet App 56 Internet memory, clear 9 ISF® Calibration 40 K Key beep 44 Keyboard, connect 15 L Language, menus 36 Light sensor 74 Lounge light 43 M Manual installation 31 Media server software 8 Media servers, supported 76 MHEG 32 Miracast, block/unblock 60 Miracast, share a screen 59 Miracast, stop sharing 60 Miracast™ 59 Mixed volume 44 Mono/Stereo 41 Mouse, connect 16 Mouse, speed 16 MPEG artefact reduction 37 Multi room, how 61 Multi room, setup 61 Multi room, what 60 Music files, playback 58 MyRemot
Skype, camera test 72 Skype, change password 72 Skype, contacts 69 Skype, Credit 71 Skype, event 71 Skype, history 71 Skype, mute 70 Skype, new account 68 Skype, notifications 71 Skype, online status 69 Skype, receive calls 70 Skype, ringtone 72 Skype, sign in 68 Skype, sign out 72 Skype, video call 70 Skype, voice call 70 Skype, voicemail 71 Sleep timer 36 Smart TV, PIN code 55 Smart TV, register 55 Smart TV, start page 55 Software, current version 77 Software, Internet update 77 Software, USB update 77 So
Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245 Sao Paulo 2938 0245 Italia 0245 28 70 14 (chiamata nazionale) 031 6300042 (Tarif local) Ireland 0818 210 140 (national call) Northern Ireland 0844 338 04 88 (5p/min BT landline) Suisse / Schweiz / Svizzera 0848 000 291 (0,081 CHF/Min.
