Register your product and get support at www.philips.
Contents 1 2 3 4 5 EN Get started 3 TV tour TV controls Important information Sustainability Help and support 3 4 6 10 12 Use your TV 13 Watch TV View programme guide Watch 3D View media Browse Smart TV Interactive TV 13 16 17 19 20 23 Use more of your TV 25 Pause TV Record TV shows Play games View Text Set locks and timers Use EasyLink View Scenea 25 26 29 30 31 32 35 Set up your TV 36 Picture and sound Channel settings Satellite settings Language settings Universal access settings Othe
TV tour High Definition TV Your TV is equipped with a High-Definition (HD) display so you can watch HD video in these ways and more: a Blu-ray disc player, connected with an HDMI cable, playing a Blu-ray disc an upscaling DVD player, connected with an HDMI cable, playing a DVD disc an over-the-air HD broadcaster (DVBT or DVB-T2 MPEG4) a digital HD receiver, connected with an HDMI cable, playing HD content from a cable or satellite operator an HD game console, connected with an HDMI cable, playing
Programme guides You can find out what's on and what's coming up with the now and next EPG (Electronic Programme guide) or eight day EPG. Programme guides are provided by broadcasters or over the Internet. If you connect your TV to the Internet, you can access more extensive programme details. 1. : Switch the TV on or to standby. 2. CH +/-: Switch to the next or previous channel. 3. : Select a connected device. 4. +/-: Increase or decrease volume.
English 6. (Home): Access the Home menu. 7. OK: Confirm an entry or selection. 8. SMART TV: Access Smart TV features. 9. (Navigation buttons): Navigate through menus and select items. 18. Colour buttons: Select tasks or options. The buttons function according to the services offered by the broadcaster. 19. SUBTITLE: Switch subtitles on or off. 20. 0-9(Numeric buttons): Select TV channels or enter text. 21. TEXT: Switch text on or off. EasyLink controls 10. LIST: Access the TV channel list. 11.
Important information Safety Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. Educate children about the dangers of climbing on furniture to reach the TV. Risk of swallowing batteries! The product/remote control may contain a coin-type battery, which can be swallowed. Keep the battery out of reach of children at all times! Risk of overheating! Never install the TV in a confined space.
Lock the TV Your TV is equipped with a Kensington security slot at the base of the TV. To secure the TV, purchase a Kensington anti-theft lock (sold separately). Terms of warranty Risk of injury, damage to TV or void of warranty! Never attempt to repair the TV yourself. Use the TV and accessories only as intended by the manufacturer. The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips Customer Care for service or repairs.
Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. English Compliance with EMF TP Vision Netherlands B.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
PlayReady Final Products Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReadyprotected content.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
You can find detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. Search the TV forum EU energy label Contact Philips The European Energy Label informs you on the energy efficiency class of the product. The greener the energy efficiency class of this product is, the lower the energy it consumes.
Watch TV Switch TV on or off Automatic switch off You can save energy with this TV's energy efficiency settings. The settings are enabled by default, so that if there is no user interaction (such as pressing a remote control button or a control on the rear panel) for four hours, the TV will automatically switch to standby. To disable automatic switch off 1. While you watch TV, press the Green button on the remote control. 2. Select [Auto switch off], then press OK. A confirmation message is displayed.
Switch TV channels Manage channel lists After the channels have been installed, you can manage them: Rename channels Reorder channels Listen to digital radio Rename channels You can rename the channels. The name appears when the channels are selected. 1. While you watch TV, press LIST. The channel list is displayed. 2. Select the channel to rename, then press OPTIONS. 3. Select [Rename], then press OK. 4. Press the Navigation buttons to select each character, then press OK.
Select a source You can watch a connected device in one of the following ways: Add its icon to the Home menu. Select from the Source menu. Note: If you connect an HDMI-CEC compliant device to the TV, it is automatically added to the Home menu. Add new device 1. Connect and switch on the device. 2. Press . 3. Select [Add your devices], then press OK. 4. Follow the onscreen instructions. If you are prompted to select the TV connection, select the connector that this device uses.
Change picture format You can change the picture format to suit the video source. 1. Press ADJUST. 2. Select [Picture format], then press OK. 3. Select a picture format, then press OK to confirm. The available picture formats depend on the video source: [Auto fill]: Adjust the picture to fill the screen (subtitles remain visible). Recommended for minimal screen distortion but not for HD or PC. [Auto zoom]: Enlarge the picture to fill the screen.
Watch 3D English Access the TV programme guide 1. Press . 2. Select [Programme guide], then press OK. Note: If you are viewing the programme guide for the first time, follow the onscreen instructions to update the guide. Use TV programme guide options You can use the programme guide to: Schedule recordings of programmes Identify channels Enable subtitles when available Show onscreen remote control 1. In the programme guide, press OPTIONS. 2.
To ensure unobstructed reception on the 3D glasses, do not block the 3D transmitter on the TV. Watch content Select a source with 3D For 3D discs: 1. Play the disc on a 3D Blu-ray disc player that is connected to the TV HDMI connector. 2. Press , then select the 3D Blu-ray disc player. For 3D TV programmes: Select [Watch TV] and switch to a TV channel that broadcasts 3D content.
What you can do You can play videos, photos and music on your TV from: Your computer, connected through the home network A USB device connected to the TV Play files from computer What you need A wired or wireless home network, connected with a Universal Plug and Play (uPnP) router A LAN cable that connects your TV to your home network A media server program running on your computer Appropriate settings on your computer firewall to allow you to run the media server program Set up the network 1.
Press to pause. Press to stop. Press or to search forward or backwards within a music track. Press CH - / CH + to skip to the previous or next video. Press and hold to exit content browser. Music playback options Press OPTIONS to access or exit the following music options: [Stop]: Stop audio play. [Repeat]: Repeat a track or an album. [Play once]: Play the track once. [Shuffle on] / [Shuffle off]: Enable or disable random play of tracks. [Show info]: Display the file information.
Start Smart TV 1. Press , select [Smart TV], then press OK. The terms and conditions of use are displayed. 2. Follow the onscreen instructions to complete registration. You can also press SMART TV on the remote control to access Smart TV. Note: The first time you start Smart TV, a prompt asks if you want to enable parental control to lock adult apps. If you lock an adult app, advertisements and web pages that are not adapted for Smart TV will remain accessible.
Scroll pages Press P+ and P- to scroll up and down on a web page. Reload page If a page does not load correctly, press OPTIONS, then select [Reload page]. View security info To view security information about a page, press OPTIONS, then select [Security info].
3. With your log-in information, enter the online video store. 4. Select the video from the list of downloaded videos, then press OK to play. Interactive TV English 3. Press the Navigation buttons to select a store, then press OK to confirm. The icon of the video store is added to the home page. 4. To view a store, select its icon and press OK. Rent a video To rent a video, open the video store app and locate the video. Follow the onscreen instructions to rent, pay for and download the video.
Access interactive TV Most channels that offer interactive services invite you to press the Red button or OK to open their interactive programme. 1. Switch to a digital channel with interactive services. While the application is loading, a blinking symbol is displayed. When the application has loaded, an icon is displayed. 2. Press the Red button or OK to launch the interactive application. 3. Follow the onscreen instructions. 4. Press or the onscreen button to close the interactive page.
Pause TV What you can do While you watch a digital channel, you can pause a programme to answer a phone call or to have a break. The broadcast is stored on a USB hard drive that is connected to the TV. You can resume playback of the programme at any time. Note: You can pause a programme for a maximum of 90 minutes. Do not overload the USB port. If you connect a USB hard drive device that consumes more than 500mA power, make sure that it is connected to its own external power supply. 1.
Pause a live TV broadcast Record TV shows What you can do 1. On a digital channel, press to pause a TV programme. 2. Press to continue watching. The status bar shows the following time indicators: A. When the programme was paused for the first time. B. Where the paused programme is currently playing. C. Where the live programme is currently broadcast. To watch the stored broadcast, press or to search backward or forward. To change playback speed, press or repeatedly.
Note: While you are formatting the USB hard drive, do not connect other USB devices to the TV. English If you can't see the [TV Recording] button, make sure that the programme guide data is set to be updated through the network. Select > [Setup] > [TV settings] > [Preferences] > [Programme guide] > [From network]. Install USB hard drive To record TV shows, you must connect a USB hard disk to the TV and format it.
To stop recording at any time, press . Note: While recording, you cannot switch TV channels. While recording, you cannot pause the TV broadcast. Schedule a TV programme recording You can schedule a recording of an upcoming programme that will be broadcast today or in up to eight days' time. 1. Press and select [Programme guide]. 2. Select the channel and programme to record. To scroll through programmes, use the Navigation buttons. To select a channel, enter the channel number.
Game setting To manage your recordings, view the list of complete and scheduled recordings. 1. Press , then select [Programme guide] > [{0} Recordings], then press OK. A list of recordings is displayed. Note: In [{0} Recordings], the number in brackets shows the number of complete recordings. If you see [TV Recording] instead, no recordings are complete.
4. Select the format in which the split-screen game is displayed: [Side by side] or [Top / bottom]. 5. Press OK. The TV shows the two screens as full screens. To switch the glasses to watch the Player 1 or Player 2 screen, switch on the glasses and press the player selection key. Switch between normal and split-screen view In two player split-screen view, you can switch back and forth from split-screen to the combined view, to be able to read the game menu or game scores.
You can search for a word or number that exists on the current text page. 1. While you are viewing text, press OK to highlight the first word or number. 2. Press the Navigation buttons to skip to the word or number to search. 3. Press OK to begin the search. 4. To exit the search, press until no word or number is highlighted. Digital text If a digital TV channel's broadcaster offers dedicated digital text or interactive services, you can view digital text.
Sleeptimer Parental rating You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleeptimer. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences] > [Sleeptimer]. 3. Press the Navigation buttons to set the sleeptimer. The sleeptimer can be set up to 180 minutes, in steps of ten minutes. To switch off the sleeptimer, set it to zero minutes. 4. Press OK to activate the sleep timer.
What you need Connect at least two HDMI-CEC compliant devices through HDMI. See Connect your TV > About cables > HDMI (Page 45). Configure each HDMI-CEC compliant device properly Switch on EasyLink Switch on EasyLink 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink]. 3. Select [On] or [Off], then press OK. Control devices simultaneously If you connect multiple HDMI-CEC devices that support this setting, you can control all such devices through the TV remote control.
Select speaker output If a connected device is HDMI CEC compliant, you can output TV audio through an HDMI cable. Additional audio cables are not required. Make sure that you connect the device to the HDMI connector on the TV. See Connect your TV > About cables > HDMI (Page 45). Configure TV speakers 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [TV speakers]. 3. Select an option, then press OK: [Off]: Switch off TV speakers. [On]: Switch on TV speakers.
Some subtitles create a separate subtitle bar under the video, which limits the video display area. To maximise the video display area, you can switch on auto subtitle shift. The subtitles are then displayed over the video image. Switch on auto subtitle shift 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [Auto subtitle shift]. 3. Select [On], then press OK to activate. Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie expand 16:9].
4 Set up your TV Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Start], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. More picture settings You can change the settings in the Picture menu. 1. Press . 2.
[Picture shift]: Move the position of the picture. You cannot select this setting if the selected picture format is [Auto fill], [Auto zoom] or [Wide screen]. [3D]*: Change the 3D picture format. [3D depth on/off]*: Enable or disable 3D. [Switch to 3D]*: Specify the way the TV switches to 3D. More sound settings You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3.
Otherwise, select [Start], then press OK. 7. Once the channel search is complete, select [Finish], then press OK. 8. Once the channel search is complete, select [Finish], then press OK. Tip: Press LIST to see the channel list. Note: When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels. Install analogue channels NonPu blish You can search and store analogue TV channels one-by-one.
Copy channels When the TV was switched on for the first time, a full installation of channels was performed. By default, when there are changes to these channel lists, the TV updates them automatically. You can also switch off the automatic update or manually update the channels. Note: If you are prompted to enter a code, enter '8888'. Automatic update To add or remove digital channels automatically, leave the TV in standby mode. The TV updates channels and stores new channels everyday.
Step 3: If the second TV has no channels installed 1. Switch on the second TV (on which you want to copy the channel list). Initial installation starts. 2. Follow the onscreen instructions and select the same country as the TV whose channel list you want to copy. 3. Skip the search for channels. 4. Connect the USB storage device. 5. Press . 6. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK. The channel list is copied to the TV storage device. 7.
Remove a satellite 1. Press > [Setup] > [Search for satellite]. 2. Select [Remove satellite], then press OK. 3. Select the satellite you want to remove and press OK. The satellite and its channels are removed from the installation. 3. Follow the onscreen instructions to complete the installation. 4. Once complete, select [Finish], then press OK. Audio language Add and remove satellites You can add or remove satellites at any time, and install channels from new satellites.
Subtitles on analogue channels Hearing impaired access 1. While you watch an analogue TV channel, press TEXT. 2. Enter the three-digit page number of the subtitles page (usually '888'). If available, subtitles are switched on. 3. Press to exit text. Tip: To make sure that a hearing impaired audio language is available, press OPTIONS, then select [Audio language]. Languages with an ear icon support hearing impaired audio. To switch on hearing impaired audio and subtitles 1.
3. Select a setting, then press OK. [On]: Enable audio effects in the visually impaired audio. [Off]: Disable audio effects in the visually impaired audio. Choose type of speech 1. Press . 2. Select [Setup] > [Channel settings] > [Languages] > [Visually impaired] > [Speech]. 3. Select a setting, then press OK. [Descriptive]: Hear descriptive speech in the visually impaired audio. [Subtitles]: Hear subtitles in the visually impaired audio. Other settings English 3. Select a setting, then press OK.
Stand mount or wall mount You can apply the best settings for your TV by selecting wall mount or stand mount. 1. In the [Preferences] menu, select [TV placement]. 2. Select [On a TV stand] or [Wall mounted], then press OK. Update software Check version 1. Press . 2. Select [Setup] > [Software settings] > [Current software info], then press OK. The version of the current software is displayed. Caution: Do not install a lower version of software than the current version installed on your product.
English 5 Connect your TV About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections shown in this user manual are recommendations only. Other solutions are possible.
SCART VGA A SCART connection combines video and audio signals. Use the supplied SCART adapter cable to connect devices. SCART connectors can handle RGB video signals but cannot handle high-definition (HD) TV signals. You can connect VGA to display PC content on the TV. VGA only transmits video. For sound, also connect to AUDIO IN. Connect devices Blu-ray or DVD disc player Connect the disc player to the TV with an HDMI cable.
English Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to connect the disc player to the TV. TV receiver Connect the satellite or digital TV receiver to the TV with an antenna cable. (SAT is available on certain models only.) Connect the satellite or digital TV receiver to the TV with an HDMI cable.
Use the supplied adapter cable with a SCART cable to connect the satellite or digital TV receiver to the TV. Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to connect the disc player to the TV. Video recorder Connect the recorder to the TV with an antenna cable. (SAT is available on certain models only.
English Use the supplied adapter cable with a SCART cable to connect the recorder to the TV. Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to connect the disc player to the TV. Game console Connect the game console to the TV with an HDMI cable.
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to connect the disc player to the TV. Home theatre Connect the home theatre to the TV with an HDMI cable and an optical cable. Use the supplied adapter cable with a SCART cable to connect the home theatre to the TV.
English Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to connect the disc player to the TV. Digital camera Connect the digital camera to the TV with a USB cable. Digital camcorder Connect the digital camcorder to the TV with an HDMI cable.
Use an audio cable and the supplied adapter cable with a component video (Y Pb Pr) cable to connect the disc player to the TV. Connect more devices USB hard drive Connect the USB hard drive to the TV with a USB cable. Computer Connect the computer to the TV with an HDMI cable.
English Connect the computer to the TV with a DVI-HDMI cable and an audio cable. Connect the computer to the TV with a VGA cable and an audio cable. Keyboard and mouse USB keyboard You can connect a USB keyboard to enter text such as device names on the TV or text for Smart TV apps. USB mouse You can connect a USB mouse to navigate pages on the Internet and click on links easily. Note: If you need extra USB connectors, use a USB hub. You can also connect the USB mouse to a connected USB keyboard.
Connect the keyboard and mouse to the TV with a USB cable. When the TV detects the keyboard, you can select the keyboard layout and test your selection. If you have selected a Cyrillic or Greek keyboard layout first, you can also select a secondary Latin keyboard layout. To change the keyboard layout, press > [Setup] > [TV settings] > [Preferences] > [USB mouse/keyboard] > [Keyboard settings] and press OK.
Rename device After you have added a new device to the Home menu, you can rename it. 1. Press . 2. Select the device icon from the Home menu. 3. Press OPTIONS. 4. Select [Rename], then press OK. A text input box appears. 5. Press the Numeric buttons and the Navigation buttons to select and enter the name. 6. When complete, select [Done], then press OK. Select a source From Home menu After you have added the new device to the Home menu, you can select the new device icon to view its contents. 1. Press . 2.
What you need Wired connection Warning: This TV complies with the EMC directive only when you use a shielded Cat5 Ethernet cable. An ethernet cable A computer network that includes: a) A universal plug-and-play (UPnP) router and b) A computer with one of the following operating systems: Microsoft Windows XP, Microsoft Windows Vista, Mac OS X or Linux. To connect your TV to computers, you also need media server software that is set to share files with your TV. See Use your TV > View media (Page 19).
Set secured connection with WPA encryption If your router has WPA (WiFi Protected Access) security, enter the pass phrase with the remote control. 1. To enter the encryption key manually, select [Standard] and press OK. 2. To access the onscreen keyboard, select the text entry field, then press OK. Set secured connection with WEP encryption If your router has WEP security, the TV asks for the WEP encryption key in hexadecimal numbers. 1.
Common interface What you can do You can watch scrambled digital TV channels with a Conditional Access Module (CAM). After the CAM is inserted and subscription fees are paid, you can watch the programme. This TV supports CI as well as CI+. CI+ supports premium HD digital programmes with a high level of copy protection. Note: The applications, functions, content and onscreen messages depend on the CAM service provider. What you need Caution: To protect the CAM from damage, insert the CAM as instructed.
General issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. The TV does not respond to remote control or front controls when switched on: The TV requires some time to start up. During this time, the TV does not respond to the remote control or front controls. This is normal behaviour.
Picture issues The TV is on, but there is no picture or the picture is distorted: Make sure that the antenna is properly connected to the TV. Make sure that the correct device is selected as the display source. Make sure that the external device or source is properly connected. There is sound but no picture: Make sure that the picture settings are set correctly. There is poor TV reception from an antenna connection: Make sure that the antenna is properly connected to the TV.
Connection issues There is a picture but sound quality is poor: If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. Make sure that all cables are properly connected. Make sure that the volume is not muted or set to zero. Make sure that the TV speaker setting is selected. Press ADJUST, select [Speakers], then select [TV].
Network issues Contact Philips You want to establish a wireless connection between your TV and home network: Refer to Connect your TV > Network and the Internet > WiFi integrated (Page 56) for instructions on how to connect your TV to your home network wirelessly. Smart TV does not work: Check that the router is properly connected to the TV and that your router has open access to the Internet.
Power and reception Product specifications are subject to change without notice. Power Mains power: AC 220-240 V~, 50-60 Hz Standby power consumption: < 0.15 W Ambient temperature: 5 to 40 degree Celsius For power consumption, see the product specifications at www.philips.com/support. The power rating stated on the product typeplate is the power consumption for this product during normal household use (IEC 62087 Ed.2).
Video formats (Resolution - refresh rate) Multimedia 480i - 60 Hz 480p - 60 Hz 576i - 50 Hz 576p - 50 Hz 720p - 50Hz, 60 Hz 1080i - 50Hz, 60 Hz 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz Supported multimedia connections USB: NTFS, FAT 16, FAT 32. Connect only USB devices which consume 500 mA of power or less. Ethernet LAN RJ-45 Supported image files JPEG (*.jpg) Supported audio/video files Multimedia file names must not exceed 128 characters.
English Supported audio/video files Multimedia file names must not exceed 128 characters. Supported subtitle formats Multimedia file names must not exceed 128 characters.
SCART (RGB/CVBS): SCART mini adaptor HDMI 1 ARC: HDMI Audio Return Channel HDMI 2/3: HDMI TV ANTENNA: 75 ohm coaxial SAT: F-pin satellite (available on certain models only) USB For 32 - 40 inch models Top screws: 16 mm Bottom screws: 13 mm For 46 - 55 inch models All screws: 16 mm Side CI: Common Interface Headphones: stereo 3.
8 Index clock - 31 3 computer, play files - 19 3D - 17 3D, 2D to 3D - 18 3D, change format - 18 3D, health warning - 7 3D, switch off - 18 A age rating - 32 amplifier, select output - 34 analogue channels, fine-tune - 38 analogue channels, install - 38 analogue channels, subtitles - 42 audio language - 41 audio sync - 34 English common interface - 58 Conditional Access Module - 58 connect devices - 45 connect, digital camcorder - 51 connect, digital camera - 51 connect, disc player - 46 connect, exte
display - 63 home network - 55 display resolution - 63 home theatre system, connect - 50 DTVi - 23 I E install channels, automatic - 37 EasyLink - 32 Interactive TV - 23 EasyLink, controls - 33 EasyLink, enable - 33 K EasyLink, features - 32 kensington lock - 8 EasyLink, onscreen control - 5 L EasyLink, remote control buttons - 33 EasyLink, TV speakers - 34 Ecolabel - 11 end of use - 11 energy efficient, settings - 10 Energy label - 12 EPG, broadcaster - 16 EPG, Electronic Programme Guide -
R Smart TV, applications - 21 Smart TV, browse - 20 Smart TV, network - 55 rear controls - 4 smartphone control - 5 record, TV programmes - 26 software, check version - 44 record, USB device - 26 software, digital update - 44 recorder, connect - 48 software, Internet - 44 recordings, manage - 29 software, USB - 44 recordings, schedule - 27 sound settings, reset - 37 recordings, watch - 28 standby - 13 recycle - 11 subtitles, analog - 42 reinstall - 44 subtitles, digital - 42 remote contr
visually impaired - 42 volume - 13 W wall mount - 66 wallpaper - 35 wireless connection - 56 Y YouTube - 21 YPbPr, component video - 45 EN 70
© 2012 TP Vision Netherlands B.V. All rights reserved.
