Firmware-Upgrade Software

Q555x_x.14.98.0 (Date published: 2012-05-07)
• Solution for audio mute when signal is dolby/AC3.
• Solution for video audio out of sync.
• Solution for UPC in Hungary resulting in no channels installed after
installation.
Q555x_x.14.97.0 (Date published: 2012-04-19)
• Solution for wrong chars on DVB-S Czech EPG.
• Solution for TV switches to standby within a few minutes .
• Solution for intermittent set reboots mainly in DVB-S.
• Solution so that the DVB-S cam module is accessible via the option menu.
Q555x_x.14.96.0 (Date published: 2012-03-02)
• 3D format option not enabled in TV3 HD during 3D broadcasting.(Spain)
• Strange signs in ‘Multi View’ visible.
• No support of certain HD and 3D channels via CI Card of DSMART.(Turkey)
• Automatic sorting of DVB-S channels not possible anymore.
• Intermittent scrambled program via Ziggo CI+.
• issues with German translation in the menu “sortieren”.
Q555x_x.14.95.0 (Date published: 2012-02-01)
• Added an option to disable the deletion of channels in background install.
(Only applicable to K-models)
• Teletext is not working on ZIGGO channel. (Only applicable to country,
Netherlands)
• Ambilight flashes intermittently .
• Movie stops by itself when you watch a rented movie from an online video
store.
• Unable to activate MHEG (with the red button) on a MHEG channel.
Q555x_x.14.93.0 (Publication date : 2011-12-21)
• Solution stuttering noise on HDMI.
Q555x_x.14.91.0 (Publication date : 2011-12-13)
• Solution Mettalic sound when switching between SD and HD sources.
• Solution about visible artefacts on the 46PFL9706.
• Solution for no sound from HTS when preset changed from DVB-C to analoge
cable.
• Solution for set hangs in semi-standby after switch off,coming from
standby.
• Solution for set goes to standby after exact 2 hours.
• Solution about startup of the set the splash screen comes up,a reboot
happens and the splash screen comes up again.
• Solution for set startup with sound and ambilight but no picture.