User manual

Connecting Antenna or Cable / Satellite /
IPTV set-top box
Be sure your antenna or another device is connected properly before
plugging in the AC power cord.
If connecting to an antenna through an RF cable
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
IN
IN
OUT
RF cable
Antenna
Cable
If connecting Cable / Satellite / IPTV set-top box using an RF
cable
If the TV is connected to a cable or set-top box via a coaxial connection,
set the TV to channel 3/4 or the channel specified by the service
provider.
IN
IN
Antenna
Set-top Box
RF cable
OUT
IN
RF cable
If connecting Cable / Satellite / IPTV set-top box using an HDMI
cable
If the TV is connected to a cable / satellite set-top box via an HDMI cable,
make sure you select the correct source by using SOURCE.
IN
IN
IN
OUT
Set-top Box
RF cable
HDMI cable
HDMI cable
HDMI cable
If connecting Cable / Satellite / IPTV set-top box using
component video input
If the TV is connected to a cable / satellite set-top box via component
video input, make sure you select the correct component video source
by using SOURCE.
Set-top Box
Set-top Box
Set-top Box
IN
IN
IN
RF cable
RF cable
RF cable
OUT
OUT
OUT
Component (Y/Pb/Pr)
Video cables
Component (Y/Pb/Pr)
Video cables
Component (Y/Pb/Pr)
Video cables
IN
IN
OUT
OUT
OUT
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
IN
IN
IN
Connecting a Cable / Satellite / IPTV set-top box, Blu-
ray disc / DVD recorder via composite connectors and
analog audio
Do not place your recorder too close to the screen because some recorders
can be susceptible to harmful interference from the TV.
Cable
OUT
RF cable
IN
IN
RF cable
RF cable
IN
IN
OUT
IN
OUT
IN
OUTOUT
RF cable
IN
Satellite
IN
Cable
Set-top Box
Video +
Audio(L/R)
cables
Video + Audio(L/R) cables
Video + Audio(L/R) cables
Video + Audio(L/R) cables
Blu-ray Disc / DVD Recorder
Note(s)
•
If you have any question about the DTV’s antenna, visit www.antennaweb.org for further
information.
•
Depending on your antenna system, you may need different types of combiners (mixers) or
separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000MHz
or 2GHz.
•
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the
antenna input jack before moving the unit.
•
If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor
or attic antennas will be more effective than a set-top box or inside antenna.
•
To turn on your reception source easily between antenna and cable, install an antenna
selector.
•
If you are not receiving a signal from your cable service, contact the cable provider.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet after
all the necessary connections are made.
Caution(s)
•
Connect the analog audio signal cables from the external device to the analog audio L/R input
jacks.
•
If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
Note(s)
•
Each time you plug in the AC power cord, no operations will be performed for several seconds.
This is not a malfunction.
12 .English
Continued on next page.