User manual

Y
You may adjust picture quality and enhancement settings using
Advanced settings sub menus. These settings allow for advanced and
precise color and picture quality adjustment. Some of them can
degrade the picture quality if not configured properly. We recommend
leaving these as set if you are unsure of what they affect.
Blue oset
Green oset
Red oset
Blue gain
Green gain
Red gain
Mode
4K UHD Upscaling
Film mode
Custom color management
Color enhancement
MPEG artifact reduction
120 PMR
Gamma
Dynamic contrast
Black stretch
Light sensor
Noise reduction
Color alignment
Clock
Auto adjustment
Mode selection
Picture format
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
Macro Dimming
Blue stretch
Color
alignment
Mode
To set the color temperature to Personal,
Cool, Normal and Warm.
When you adjust the following settings,
Personal will be set automatically.
Cursor Cursor
Red gain
To decrease red
contrast
To increase red
contrast
Green gain
To decrease green
contrast
To increase green
contrast
Blue gain
To decrease blue
contrast
To increase blue
contrast
Red offset
To decrease red
brightness
To increase red
brightness
Green offset
To decrease green
brightness
To increase green
brightness
Blue offset
To decrease blue
brightness
To increase blue
brightness
Noise
reduction
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Light sensor *
Off To set light sensor to off
On
To adjust backlight for the best picture
quality by dynamically adjusting the
backlight intensity in accordance with
lighting condition in the room
Black
stretch
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Dynamic
contrast
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Gamma
To select the desired setting, then press OK
(Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
120 PMR
Off To set 120 PMR to Off
On To make the video appear smoother
4K UHD
Upscaling
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Macro
Dimming
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
MPEG
artifact
reduction
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Color
enhancement
Off To set color enhancement to off
On To make colors more vivid and bright
Custom color
management
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Cursor Cursor
Tint
To rotate only
selected color tint in
clockwise direction
To rotate only
selected color tint in
counterclockwise
direction
Saturation
To decrease color
with only selected
color
To increase color
with only selected
color
Brightness
To decrease
brightness with only
selected color
To increase
brightness with only
selected color
Blue stretch
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Film mode
Off To set film mode to off
Auto
To optimize the picture recorded by the
original film
*
Adjusts backlight for the best picture quality by dynamically adjusting
the backlight intensity in accordance with the room lighting condition
when the Light sensor feature is set to On. Please ensure the room
lighting is stable and the light sensor is not blocked.
Note(s)
Mode selection is available only if
The external input modes are selected HDMI 1, HDMI 2 or HDMI 3.
The connected HDMI device is outputting a video signal.
29 .English
Continued on next page.