Register your product and get support at www.philips.
Contents 6.8 Cleaning 28 1 TV Tour 4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 7 Gesture Control 29 Android TV 4 Apps 4 Movies and Missed Shows 4 Social Networks 4 Pause TV and Recordings 4 Gaming 4 Skype 4 3D 5 Smartphones and Tablets 5 7.1 7.2 7.3 7.4 7.5 8 Home Menu 31 8.1 8.2 8.3 8.4 2 Setting Up 6 2.1 2.2 2.3 2.4 2.5 2.
16.3 Open Recent 51 27.1 27.2 27.3 27.4 27.5 27.6 27.7 27.8 27.9 17 Games 52 17.1 17.2 17.3 17.4 17.5 What You Need 52 Game Settings 52 Play a Game 52 Gamepads 52 Split Screen Gaming 52 18 Videos, Photos and Music 54 18.1 18.2 18.3 18.4 18.5 18.
* Depending on the video streaming service of the selected video store. 1 TV Tour 1.4 1.1 Social Networks Android TV This Philips TV is powered by Android™. No need to get up to check your friend's messages on your computer. As on your smartphone or tablet, your new TV has the most practical Apps for every bit of TV entertainement you can think of. Watch TV channels, play online games, call a friend on Skype or simply speak and ask the TV to find your favourite song on the Internet.
You can make free Skype-to-Skype voice and video calling to other Skype-enabled devices. To make a video call, you need a camera with a built-in microphone and a good connection to the Internet. Some Philips TVs have a camera and microphone built in. For more information, press Keywords and look up Skype. 1.8 3D Your new TV is a 3D TV. Enjoy the immersive experience of watching a movie in 3D.
performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 2 Setting Up 2.1 Read Safety 2.3 Read the safety instructions first before you use the TV. Tips on Placement To read the instructions, press the colour key Keywords and look up Safety instructions.
2.5 Two Tuners Antenna Cable To watch a satellite channel and to record another channel at the same time, you must connect 2 identical cables from your satellite dish to the TV. Insert the antenna plug firmly into the Antenna socket at the back of the TV. Connect the first cable from the satellite dish directly to the SAT 1 connection and connect the second cable to SAT 2. Use a coaxial cable fit for connecting a satellite antenna dish.
5 - Go to the router, press the WPS button and return to the TV within 2 minutes. 6 - Click Connect to make the connection. 7 - A message will be shown when the connection is successful. 3 Network 3.1 Connect to Network WPS with PIN Code If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
Switch On with Wi-Fi (WoWLAN) You can switch this TV on from your smartphone or tablet if the TV is in Standby. The setting Switch On with Wi-Fi (WoWLAN) must be switched on. To switch on WoWLAN… 1 - Press and press (left) Setup. 2 - Click Network and click Switch on with Wi-Fi (WoWLAN). 3 - Click On. 4 - Press BACK repeatedly if necessary, to close the menu.
3 - Enter the name with the Remote Control Keyboard. 4 - Click Done. 5 - Press BACK repeatedly if necessary, to close the menu. Clear Internet Memory With Clear Internet Memory you clear all Internet files stored on your TV. You clear your Philips Smart TV registration and parental rating settings, your video store app logins, all Smart TV app favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
4 Connections 4.1 Tips on Connections Connectivity Guide EasyLink HDMI CEC Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device.
Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS. Y Pb Pr Y Pb Pr - Component Video is a high quality connection. The YPbPr connection can be used for High Definition (HD) TV signals.
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink. CI+ This TV is ready for the CI+ Conditional Access. Example HDMI CEC branding names are property of their respective owners. With CI+ you can watch premium HD programmes, like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module.
4.4 Two Smart Cards Set-Top Box - STB Some Digital TV operators can provide a second CI+ module (CAM) and smart card. A second CAM and smart card is needed when you want to watch one channel while recording another channel from the same TV operator. Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV. If you can watch the same amount of channels with each card, both cards have identical viewing rights.
Connect with HDMI Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System. Switch Off Timer Switch off this automatic timer, if you only use the remote control of the Set-top box.
Audio Out Offset Problems with HTS sound If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms. Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.
If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control. For more information on EasyLink, press the colour key Keywords and look up EasyLink HDMI CEC. 4.9 Game Console HDMI For best quality, connect the game console with a High speed HDMI cable to the TV. 4.10 Gamepad Connect a Gamepad To play games from the Internet on this TV, you can connect a selected range of wireless Gamepads. When you connect the Gamepad, you can use it immediately.
Trouble with Interference To solve possible interference with other wireless devices on TV… • Use a USB extension cord and move the nano receiver about 1 meter away from the TV. • Alternatively, you can use a powered USB hub connected to the TV and plug in the nano receivers in the USB hub. Warning 4.11 The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application.
press OK. 3 - Press the arrows (up) or (down) to increase or lower the speed. 4 - Press the arrow (right) move the mouse around to test the speed you set. 5 - Press the arrow (left) to return to the slider bar. You can adjust the setting again. 6 - With the slider bar selected, press (left) to store and close this setting. 7 - Press BACK repeatedly if necessary, to close the menu.
Video-Audio LR / Scart You can use an HDMI, YPbPr or SCART connection to connect your camcorder. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter (sold separately) to connect to the SCART connection. If the contents list does not appear automatically, press SOURCES, and click USB. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.
Settings If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically. If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting. To set the TV to the ideal setting manually… 1 - Press and press (left) for Setup. 2 - Click Picture > Advanced and click Game or Computer.
5 5.3 Switching On and Off Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. 5.1 On, Standby or Off To open the basic menu… 1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select Volume, Channel or Sources. If the TV is in Shop location, you can also select Camera. 3 - Press up or down to adjust the volume or tune to the next or previous channel.
1 - Press and click Eco Settings. 2 - Click Switch Off Timer. Click inside the slider bar to adjust the value. The value 0 (Off) deactivates the automatic switch off. The icon is shown in front of Switch Off Timer when it is active. For more information on environmentally friendly TV settings, press the colour key Keywords and look up Eco Settings.
6 Remote Control 6.1 Key overview Top 1 - HOME To open the Home menu. 2 - SOURCES To open the Sources menu. 3 - Colour keys Direct selection of options. Blue key , opens Help. 4 - INFO To open or close programme info. 1 - Standby / On To switch the TV on or back to Standby. 5 - BACK To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous App/Internet page. 2 - Playback and Record • Play , to playback.
2 - Number keys To select a channel directly. briefly jiggle the remote control. 3 - SUBTITLE To switch Subtitles on, off or on during mute. Clicking 4 - LIST To open or close the Channel List. To select what you need, hover over the item with the Pointer and press – click – the OK key. As you do with a computer mouse. For the Colour Keys, INFO and OPTIONS you still need to press the keys on the remote control. 5 - Channel To switch to the next or previous channel in the channel list.
what you are looking for. Channels must be installed and media must be set to share. Connected devices must be switched on. The TV must have a connection to the Internet. Switch Off Pointer To switch off the Pointer… 1 - Press and press (left) Setup. 2 - Select General Settings > Remote Control Pointer and select Off. 3 - Press BACK repeatedly if necessary, to close the menu. 6.4 Keyboard Overview 6.3 Qwerty and Azerty Voice Overview of a Qwerty/Azerty keyboard.
2 - Cyrillic keyboard switch To switch the keyboard to the Cyrillic characters or back to Qwerty. Internet You can use the Fn key to enter www. or .com. 3 - Shift To type uppercase characters. Accented Letters and Symbols 4 - Ω Special characters To open the onscreen keyboard to select accented characters or symbols. Accented characters and symbols are not directly available on the Remote Control Keyboard. To type such a character, you can open the onscreen keyboard.
For the remote control to communicate with the TV, both TV and remote control should be paired (linked) with each other. Once paired, you cannot use the remote control to control another TV. When you started the initial TV installation, the TV invited you to press the OK key, and by doing so, the pairing was done. When you switch off the TV, the pairing is stored. You can pair up to 5 remote controls with this TV. 6.7 Batteries The TV will notify you when the battery power of the remote control is low.
7 Clicking • Close and open your hand to ‘click’ a button. • If you put your hand down, Gesture Control stays active for about 5 seconds. • Holding your hand up within 5 seconds will immediately show the Pointer or the menu for gestures. • If you hold up your hand when the 5 seconds have passed, you will need to ‘click’ with your hand again to call up the menu for gestures. Gesture Control 7.1 About Gesture Control With Gesture Control you can operate the TV with simple hand gestures.
7.5 Tips • Always open your hand fully and turn the palm of your hand towards the TV. • If the hand controlled Pointer gets out of your comfortable reach, reposition your hand. Lower your hand and bring it up again. • To call up the Home menu, lower hand and call up the menu for gestures. With your hand, click Home Menu.
11 - Options, the icon is white when Options are available. 12 - , open the tab full page. 8 Home Menu 8.3 8.1 Notifications Open the Home Menu The TV can receive a wide range of messages -called Notifications. These Notifications come from any application on your TV or can be sent to you from friends or App service centres. Notifications are collected in a list and the latest Notification is placed on top. To really enjoy the benefits of Android, connect the TV to the Internet.
1 - Press HOME to open the Home menu. 2 - Click in the top bar to open Now on TV. 9 Now on TV In Now on TV you can… • click on a programme icon to tune to the ongoing programme. • click on an icon of a scheduled programme to tune to the channel already. • click on an advert to open the webpage of the advert. 9.1 About Now on TV With Now on TV in the Home menu, the TV recommends the 9 most popular programmes to watch at this moment.
10 To stop an App… Apps Press HOME and select another activity or press EXIT to watch TV. 10.1 10.4 About Apps Chrome™ With Apps in the Home menu, you open the Apps pages. Open the Browser The Apps pages show the collection of Apps (Applications) on your TV. Like Apps on your smartphone or tablet, the Apps on your TV offer specific functions for an enriched TV experience. Apps like Facebook, YouTube, Twitter, TV games or weather forecasts (a.o.).
press the colour key Keywords and look up Videos, Photos and Music. 10.5 App Lock You can set the TV to lock Apps unsuited for children. 10.7 Only Apps from the App Gallery can be locked. To unlock an App you need the Child Lock PIN code of the TV. Remove Apps and Widgets To lock Apps unsuited for children… You can remove Apps and Widgets from the Apps pages. 1 - Press HOME to open the Home menu. 2 - Click in the top bar to open Apps. 3 - Press OPTIONS and click Terms of Use.
Read the Google Legal Information. To set the Android settings… 1 - Press and press (left) Setup. 2 - Click General Settings and click Android Settings. 3 - Click on the setting you want. 4 - Press BACK repeatedly if necessary, to close the menu. 10.10 Terms of Use - Apps When you connected the TV to the Internet, you were invited to agree to the Terms of Use. To use the Apps from the Philips App Gallery and Google Play, you must agree to the Terms of Use.
11 11.3 Video on Demand Streaming With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard Drive connected, you can also download rental movies from video stores that offer movie downloading only. Consult the video store for terms and conditions. 11.
12 TV on Demand 12.1 About TV on Demand With TV on Demand in the Home menu, you can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Also, you can let TV on Demand do some personalised recommendations of programmes, based on the TV installation and the programmes you watch regularly. To get these personalised recommendations, you must agree to the Personal Recommendations Consent in the Terms of Use.
your favourite channels. You can filter on radio stations or TV channels and also filter on digital or analogue channels. 13 Channels After an Automatic Channel Update, the Channel List is automatically updated. New channels are marked with an icon. 13.1 Channel icons Watching Channels Favourite channel Locked channel New channel Scrambled channel Switch Channels To start watching TV channels, press . The TV tunes to the channel you last watched.
1 - While watching a TV channel, press LIST to open the Channel List. 2 - Click Favourites. 3 - Press the colour key Move. 4 - Place the Pointer on top of the channel that you want to move and click and drag it to its new position. If the channel needs to go to the next or previous page of channels, drag the channel to the top or bottom edge of the page. The previous or next page will appear. An arrow indicates the new position. 5 - Release the OK key to drop the channel on its new position.
To set an age rating… Channel Options 1 - Press and press (Left) Setup. 2 - Click General Settings > Child Lock > Parental Rating. 3 - Enter a 4-digit Child lock code. If you did not set a code yet, click Set code in Child Lock. Enter a 4-digit Child lock code and confirm. Now you can set an age rating. 4 - Back in Parental Rating, click on the age and press OK. 5 - Press BACK repeatedly if necessary, to close the menu. Open Options While watching a channel, you can set some options.
with . To format the picture manually… Subtitle language 1 - Press (Picture Format). 2 - Press Advanced, if the Basic settings open first. 3 - Use Shift, Zoom or Stretch to adjust the picture. Alternatively, click Last Setting to switch to the format you stored before. Click Undo to return to the setting the picture had when you opened Picture Format. 4 - The TV stores your settings as Last Settings when you press Basic or press Back to close the menu.
Search Text To set your primary and secondary Text language . . . You can select a word and scan Text for all occurences of this word. 1 - Press and press (left) Setup. 2 - Click General Settings > Languages and click Primary Text or Secondary Text. 3 - Click your preferred Text languages. 4 - Press BACK repeatedly if necessary, to close the menu. 1 - Open a Text page and press OK. 2 - Select a word or number with the arrow keys.
2 - Click General settings and click Language > Menu Language. 3 - Click on the language you need. 4 - Press BACK repeatedly if necessary, to close the menu. Subtitles from Text If you tune to an analogue channel, you need to make the subtitles available for each channel manually. 1 - Switch to a channel and press TEXT to open Text. 2 - Enter the page number for subtitles, usually 888. 3 - Press TEXT again, to close Text.
Recordings made with the setting From the broadcaster become invisible in the list if you switch the setting to From the Internet or vice versa. The TV might have switched to From the Internet automatically. To make the recordings available in the list of recordings, switch to the setting that was selected when the recordings were made. videos within iTV pages. Digital Text (UK only) To open Digital Text, press TEXT. To close, press BACK.
To view a list of all reminders you have set, press OPTIONS and click Scheduled Reminders. Search by Genre If the information is available, you can look up scheduled programmes by genre like movies, sports, etc. To search for programmes by genre, press OPTIONS and click Search by Genre. Select a genre and press OK. A list with the found programmes appears. Recordings From the TV Guide, you can instantly record or schedule a recording of a TV programme.
To switch on both disc player and TV from Standby and start playing the disc immediately, press (play) on the TV remote control. The device must be connected with an HDMI cable and both TV and device must have HDMI CEC switched on. 14 Sources 14.1 Switch to a device From the list of Sources, you can switch to a connected device and watch its programme. To switch to a connected device… 1 - Press SOURCES to open the Sources menu. 2 - Click on the icon of the connected device.
15 Switch On and Off 3D To switch on the 3D glasses, press . The glasses need some seconds to adjust to the 3D signal from the 3D transmitter on the TV. At first use, this may take up to 15 seconds. 15.1 What You Need Battery Level This is an active 3D TV. On this TV, you can watch 3D programmes and movies in full High Definition resolution. You can check the battery level when you switch on the 3D glasses.
You can check the battery level when you switch on the 3D glasses. • If the LED light blinks green, you can use the glasses for 4 hours or more. • If the LED light blinks orange, you can use the glasses for less than 4 hours. • If the LED light blinks red, the battery is almost empty and less than 2 hours of 3D watching remain. Switch off To replace the battery, press the small knob on the battery lid and slide the lid up to open. Replace the battery: type CR2032 (3V).
Warning Create 3D from 2D Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. With 2D to 3D Conversion, you can watch 3D all the time. The TV creates 3D artificially from a 2D signal. Danger • Do not ingest the battery. Chemical burn hazard. • This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
15.6 Health Warning • Watching 3D is not recommended for children under the age of six. • If you or your family have a history of epilepsy or photosensitive seizures, consult a medical professional before exposing yourself to flashing light sources, rapid image sequences or 3D viewing. • If you experience any discomfort, stop watching 3D and do not immediately engage in any potentially hazardous activity (for example driving a car) until your symptoms have disappeared.
16 Multi View 16.1 Open Multi View With Multi View you can watch two different channels at the same time. One channel on the full screen and another channel in a small screen shown in the top right corner. The small screen has no sound. Multi View is only available for digital channels. To open Multi View… 1 - Switch to TV, press SOURCES and click Antenna TV , Cable TV or Satellite TV and tune to a channel. 2 - Press MULTI VIEW. If Multi View is available, the highlight shows the Multi View icon.
For more information on connecting a Game Console, press Keywords and look up Game Console, connect. 17 Games From the Apps Pages 17.1 What You Need On TV, you can play a game installed on the Apps pages. On this TV, you can play games from… To start the game… • A connected Game Console • The App Gallery in the TV Apps menu • The Internet on this TV • The Google Play store, games downloaded on this TV 1 - Press HOME to open the Home menu. 2 - Click in the top bar to open Apps.
17.5 Split Screen Gaming About Split Screen Gaming If you play a two-player game with split screens, you can set the TV to show each screen as a full screen. Each player sees only his part of the game, full screen. The TV uses 3D technology to show both screens. What you need To play a two-player game with this TV, you need 2 active 3D glasses - Philips PTA507, PTA508, PTA509, PTA517, PTA518 or PTA519. Also, the game console must be connected with HDMI.
18 18.3 Videos, Photos and Music From a Mobile Device About Wi-Fi Miracast You can view your photos or play your music and videos from a mobile device with Wi-Fi Miracast™. 18.1 From a USB Connection Your TV is a Wi-Fi Certified Miracast™ device. With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), share photos or anything else that's on screen of the device.
You might find the Wi-Fi connection (e.g. 'DIRECT_tvname') also in lists of available networks on other network devices, e.g. your laptop computer. However, this connection can only be used by Wi-Fi Miracast devices. 18.4 Videos Play Videos Stop Sharing How to open a list of media files on TV depends on the type of device where the files are stored. You can stop sharing a screen from the TV or from the mobile device. To play a video, click on the file name of the video in the List of Media files.
position, duration, title, date, etc.), press INFO. Press again to hide the info. • To stop the slide show or close the photo, press LIST or (Stop). To play music with the slide show… 1 - Start the music before you start the slide show. 2 - Select a song or a folder with songs and press OK. 3 - Select a photo or a folder with photos and press Slide Show. Music Options Colour key functions and Options for playing music. • Play All – Play all songs in this filder. • Play One – Play this song only.
Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. 19 Pause TV To replay a current broadcast… 1 - Press (Pause) 2 - Press (Left). You can press repeatedly until you reach the start of the broadcast storage or the maximum time span. 19.1 What You Need You can pause a digital TV broadcast and resume watching it later.
3 - The TV adds some time buffer at the end of the programme. You can add some extra buffer if needed. 20 Recording To adjust the end time of the recording… 1 - Press HOME to open the Home menu. 2 - Click Apps and click Recordings. 3 - Select the recording you want to adjust and press Adjust Time. If the TV Guide comes from the Internet, select the recording and press OK. If programme info is shown, press Adjust Recording. 20.
Band available, you can only watch the channels that don't need decoding and the channel you are recording. For more information, press the colour key Keywords and look up Smart Card, CAM. 20.3 Watch a Recording To watch a recording… 1 - Press HOME to open the Home menu. 2 - Click Apps and click Recordings. 3 - In the list, select the recording and press OK to start the playback. You can use the (Forward), (Rewind), (Pause) or (Stop) keys on the remote control.
21 Sign In Skype 21.1 Sign in to Skype with your Skype Name and password. If you don't have a Skype Name yet, you have to create a new Skype account. About Skype To sign in to Skype… 1 - Press to open the Home menu. 2 - Click Apps and click Skype. 3 - If you start Skype for the first time, you can adjust the camera. 4 - If you did not sign in to Skype on this TV before, click Sign in or Add an account. If you have signed in before, click your account. 5 - Follow the instructions on screen.
21.4 To add a Skype contact… Skype Menu 1 - On the People page, click Add a friend. 2 - Enter the Skype Name or email address of your new contact. You can also try to enter a name. When you're done, click Search Skype. 3 - Skype will search for the contact you are looking for and will show the search results. 4 - Click on the contact you want and select Add contact. 5 - Write the request and click Send. Skype will send the request message to your new contact.
3 - To end the call, click End call. Phone numbers can't be blocked. They can only be removed from your contact list. A contact can add you to a Voice call with more than one participant. You cannot add an extra participant yourself. To block and remove a contact... 1 - On the People page, click on the contact you want to block. 2 - Click Remove and block this contact. 3 - Click Remove. The contact is removed from your contact list and will not be able to contact you.
To buy Skype Credit or take a Skype subscription, sign in to Skype on your computer. The Skype Credit you buy will be available when you sign in to Skype on your TV. History On the History page of the Skype menu, you will find a list of the calls you made on TV. You will find the calls you missed and you can listen to Voice messages. The amount of credit or the subscription information is shown on each page where you can make a phone call.
right. To tilt the camera frame, click the arrows up or down. 4 - Click Save to store the camera viewpoint. Blocked Contacts You can view a list of all your blocked contacts. In this list you can unblock contacts. 21.9 To open the list… Back to TV 1 - Sign in to Skype with your account. 2 - In the Skype menu, click Settings. 3 - Click Security > Manage blocked contacts. Click Back to TV to close Skype and continue watching TV. Your contacts will still be able to call you. Incoming Calls 21.
22 Start Up Multi Room When you start Multi Room for the first time, switch on both TVs. 22.1 About Multi Room Once this TV made a connection with the other TV, the other one will appear automatically in the Browse network menu even when it's in Standby. With Multi Room you can watch a TV programme that comes from another TV in your home. The programme is streamed from one TV to the other. You can stream a programme to a TV that has no antenna connection or has no Smart card subscription of its own.
23 Share This… With the Share This key on the back of the Remote Control and next to the keyboard at the right, you can share the channel and programme name you’re watching or share the Internet address of the site you’re on. You can share the title and info of a programme selected in the TV Guide or share the App name and its icon from Smart TV. You can share all these things on Facebook or Twitter or any social network available on your Smart TV App pages. Your TV must be connected to the Internet.
24 Philips TV Remote App The new Philips TV Remote App is your new TV buddy. With the TV Remote App on your smartphone or tablet, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. Look up what you want to watch and watch it on your phone or TV. With the TV Remote App you are in control. You might consider to simply lower the TV volume. Download the Philips TV Remote App from your favourite app store today.
2 - Click Picture > Picture Style and click on the Picture Style you want to restore. 3 - Press the colour key Restore Style. The style is restored. 4 - Press BACK repeatedly if necessary, to close the menu. 25 Setup 25.1 Quick Settings Home or Shop If the Picture Style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. A setting meant for in-store promotion. The TV settings you need most often are bundled in the Quick Settings menu.
To adjust the contrast… To set a custom colour temperature… 1 - Press and press (left) Setup. 2 - Click Picture > Contrast and click inside the slider bar to adjust the value. 3 - Press BACK repeatedly if necessary, to close the menu. 1 - Press and press (left) Setup. 2 - Click Picture > Advanced > Colour > Custom Colour Temperature and click inside a slider bar to adjust the value. WP is white point and BL is black level. You can also select one of the presets in this menu.
users. Perfect Contrast To adjust the level… With Perfect Contrast, you can set the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture. 1 - Press and press (left) Setup. 2 - Click Picture > Advanced > Contrast > Gamma and click inside the slider bar to adjust the value. 3 - Press BACK repeatedly if necessary, to close the menu. To adjust the level… 1 - Press and press (left) Setup.
1 - Press and press (left) Setup. 2 - Click Picture > Advanced > Motion > Digital Natural Motion. 3 - Click Maximum, Medium, Minimum or Off. 4 - Press BACK repeatedly if necessary, to close the menu. When you finished the Quick Picture Setting you can start the Quick Sound Setting for an easy setting of the TV sound. Location If the TV is installed in a shop, you can set the TV to display an in store promotion banner. The Picture style is set to Vivid automatically.
The selected style will store the changes you made. We recommend to adjust the sound settings for the style Personal only. The Sound Style - Personal can save its settings for each individual connected device in Sources menu. To switch on or off… 1 - Press and press (left) Setup. 2 - Click Sound > Auto Surround 3D. 3 - Click On or Off. 4 - Press BACK repeatedly if necessary, to close the menu. To restore the style to its original setting… 1 - Press and press (left) Setup.
1 - Press and press (left) Setup. 2 - Click Sound > Advanced > TV Speakers. 3 - Click Off, On, EasyLink or EasyLink Autostart. 4 - Press BACK repeatedly if necessary, to close the menu. Audio Out Format With Audio Out Format you can set the audio out signal of the TV to fit the sound processing capabilities of your Home Theatre System. To switch to speakers directly… For more information, press Keywords and look up Audio Out Format. 1 - While watching TV, press .
4 - Configure bulb Ambilight Settings Ambilight Brightness Network With Ambilight Brightness, you can set the level of brightness of the Ambilight. In this first step, you will prepare the TV to find the Philips Hue Bridge. To adjust the level… The TV and the Philips Hue Bridge must use the same network. Connect the Philips Hue Bridge to the router with an Ethernet cable — the router of the network the TV is using. Switch on the Hue bulbs. 1 - Press and press (left) Setup.
2 - Click Ambilight > Ambilight+hue > View Configuration. 3 - Press BACK repeatedly if necessary, to close the menu. Ambilight+hue. To select the bulbs for Ambilight+hue… 1 - In the Configure Ambilight+hue menu, click Hue bulbs. 2 - Mark the bulbs that have to follow the Ambilight. To mark a bulb, click on the bulb name. 3 - When you’re done, click OK. Advanced Ambilight Settings Wall Colour With the bulbs marked for Ambilight+hue, go to page Configure bulb.
switched on and automatically set to follow Lounge Light when you configure Ambilight+hue. If you do not want the hue bulbs to follow Lounge Light, you can swicth the bulbs off. Clock To switch the hue bulbs off… To know what time it is, press . The Home Menu always shows what time it is. 1 - Press and press (left) Setup. 2 - Click Ambilight > Advanced > Lounge Light+hue. 3 - Click Off. 4 - Press BACK repeatedly if necessary, to close the menu.
Screen Off Switch On If you only listen to music, you can switch off the TV screen to save energy. With Accessibility switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people. To only switch off the TV screen… Switch on 1 - Press and click Eco Settings. 2 - Click Screen Off. If you did not switch on Accessibility during the installation, you can still switch it on in Setup.
To switch on these subtitles (if available) . . . Audio Description 1 - Press and press (left) for Setup. 2 - Select Accessibility > Audio Description > Speech and press OK. 3 - Select Descriptive or Subtitles and press OK. 4 - Press BACK repeatedly if necessary, to close the menu. Switch On Digital TV channels can broadcast special audio commentary describing what is happening on screen. To be able to set the visually impaired audio and effects, you have to switch on Audio Description first.
2 - Click Antenna/Cable Installation > Search for Channels and click Update. 3 - Follow the instructions on screen. The update may take a few minutes. Channel List Copy Introduction Channel List Copy is intended for dealers and expert users. In some countries, Channel List Copy is only available for copying satellite channels. New channels With Channel List Copy, you can copy the channels installed on one TV onto another Philips TV of the same range.
this TV. 5 - The TV notifies you if the channel list is copied to the TV successfully. Unplug the USB flash drive. DVB Settings Network Frequency Mode If you intend to use the fast Quick Scan method in Frequency Scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable operator in your country.
not subscribe to pay TV channels or services, you can select Free Channels Only. 25.10 Installation Satellite For more information, press the colour key Keywords and look up CAM - Conditional Access Module. Installing Satellites About Installing Satellites Reception Quality This TV has two built-in satellite DVB-S/DVB-S2 tuners. You can check the quality and signal strength of a digital channel. If you have your own antenna, you can reposition the antenna to try and improve the reception.
available channels, select one or the other. The TV will install the satellite channels and radio stations. 8 - To store the satellite setup and installed channels and radio stations, click Finish. User Band Number In a Unicable system, each connected satellite tuner must be numbered (e.g. 0, 1, 2 or 3 etc.). You can find the available user bands and their number on the Unicable switchbox. User band is sometimes shortened as UB. There are Unicable switchboxes that offer 4 or 8 user bands.
Manual Channel Update Manual Installation You can always start an channel update yourself. Manual Installation is intended for expert users. To start a channel update manually… You can use Manual Installation to quickly add new channels from a satellite transponder. You need to know the frequency and polarization of the transponder. The TV will install all channels of that transponder.
on the first satellite. Check the signal strength indicator of the first satellite on screen. With the first satellite set at the strongest signal, select Search again to find the second satellite. • Make sure the settings are set to Two Satellites. Changing the installation settings did not solve my problem • All settings, satellites and channels are only stored at the end of the installation when you finish.
When the update is complete, the TV switches off and back on again automatically. Wait for the TV to switch itself back on. Do not press the Power switch on the TV. 26 Software To look for a software update yourself… 26.1 1 - Press and press (left) Setup. 2 - Click Update Software > Search for Updates and click Internet. Follow the instructions on screen. Update Software Update from USB 26.2 It might be necessary to update the TV software.
software. The preceding does not affect your warranties and statutory rights regarding any TP Vision Europe B.V. product(s) you purchased. It only applies to this source code made available to you. HOLDERS BE LIABLE FOR ANY CLAIM,DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OROTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USEOR OTHER DEALINGS IN THE SOFTWARE.
openssl (1.0.1e) OpenSSL is an open-source implementation of the SSL and TLS protocols. The core library, written in the C programming language, implements the basic cryptographic functions and provides various utility functions.The original download site for this software is : http://openssl.org/OpenSSL license software without specific prior written permission.
server and client Web applications. It supports major Internet transport, data format, and service description standards like HTTP and HTTPS, SMTP, XML, JSON, Atom, and WADL.The original download site for this software is : http://restlet.orgThis piece of software is made available under the terms and conditions of the Apache License version 2. similar to the existing emx libraries). freetype (2.4.
or infringement of any intellectual property or other right of any person or entity.11. The Terms of Use will be governed by and construed in accordance with the laws of Hong Kong.12. Any waiver of any provision of the Terms of Use will be effective only if in writing and signed by HKSARG or its representative.13.
loss in quality.The original download site for this software is : http://www.xiph.orgThis piece of software is made available under the terms and conditions of the BSD license, which can be found below. fusion (8.10.3) Fusion provides an implementation of abstractions needed for multi-threaded/multi-process programming: .The original download site for this software is : http://www.directfb.org/This piece of software is made available under the terms and conditions of the LGPL v2.
for this software is : http://www.sentex.net/~mwandel/jhead/Portions of this source code are in the public domainCopyright (c) 2008, The Android Open Source ProjectAll rights reserved.Redistribution and use in source and binary forms, with or withoutmodification, are permitted provided that the following conditionsare met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Apache License version 2.0. http://www.nuance.com/This piece of software is made available under the terms and conditions of Apache License version 2.0. NFC (NA) NFC Semiconductor's NFC Library. Near Field Communication (NFC) is a set of short-range wireless technologies, typically requiring a distance of 4cm or less to initiate a connection. NFC allows you to share small payloads of data between an NFC tag and an Android-powered device, or between two Androidpowered devices.
under the terms and conditions of Apache License version 2.0.
rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program.
other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables.
the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.
______________________________ "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. provided that such additional attribution notices cannot be construed as modifying the License.
other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages. libpng versions 1.2.6, August 15, 2004, through 1.4.1, February 25, 2010, are Copyright (c) 2004, 2006-2007 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors 9. Accepting Warranty or Additional Liability.
is defined as the following set of individuals: _____________________________ This software is based in part on the work of the FreeType Team. Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner ---------------------The FreeType Project LICENSE ---------------------------- The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc.
=========== o Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isn't mandatory. 0.
the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.
* If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1.
27 health. Specifications 27.2 Power 27.1 Environmental Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/support European Energy Label Power • Mains power : AC 220-240V +/-10% • Ambient temperature : 5°C to 35°C • Standby power consumption : < 0.3W • Power saving features : Light sensor, Eco mode, Picture mute (for radio), Auto switch-off timer, Eco settings menu.
Width 1068 mm - Height 610 mm - Depth 46 mm - Weight ±13,5 kg • with TV stand: Height 685 mm - Depth 220 mm - Weight ±17,5 kg 27.
• DTS Premium Sound ™ 27.9 Multimedia Connections • USB 2.0 • Ethernet LAN RJ-45 • Wi-Fi 802.
Support If you do not notice the flickering, the remote control might be broken or its batteries are low. This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV. 28.
Picture does not fit the screen Photos, videos and music from a USB device do not show • Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. • Make sure that the USB storage device is compatible with the TV. • Make sure that the audio and picture file formats are supported by the TV. Change to a different picture format. Press . Picture format keeps changing with different channels Select a non 'Auto' picture format.
28.5 Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Warning Do not attemp to repair the TV yourself.
29 Risk of Injury or Damage to the TV Safety and Care • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning Storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of Hearing Damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low Temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
2011/65/EU (ROHS). Compliance with EMF TP Vision Europe B.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products.
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. DTS Premium Sound ™ Microsoft PlayReady Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReadyprotected content and/or WMDRM-protected content.
Index 3 3D 47 3D Backlight Contrast 68 3D, 2D to 3D Conversion 49 3D, glasses PTA509 47 3D, glasses PTA519 48 3D, Health Warning 50 3D, Optimal Viewing 49 3D, Watch 51 A Accessibility 77 Accessibility, Hard of hearing 77 Age Rating 39 Ambilight Style 73 Ambilight+hue 74 Ambilight, Lounge Light 75 Ambilight, Lounge Light+hue 75 Ambilight, On or Off 75 Ambilight, Settings 74 Ambilight, TV placement 6 Ambilight, TV Switch Off 75 Ambilight, Wall Colour 75 Android OS, version 107 Announcements 106 Antenna conne
DVI, connect 11 I E iTV 45 EasyLink 12 EasyLink HDMI CEC 13 EasyLink Settings 13 EasyLink, connection 15 Eco Settings 76 End of use 109 ESD 109 European Energy Label 107 K F Factory Settings 79 Favourite Channel List 41 Feature Promotion Banner 71 Fill Screen 43 Fit to Screen 45 Frequency Scan 80 Frequency Step Size 80 G Game Console, connect 17 Game or Computer, setting 68 Gamepad, connect 17 Games, ideal setting 52 Gaming 52 Gaming, Split Screen Game 53 Gamma 72 Gesture Control 29 Gesture Control,
Original Language 45 P Pairing the Remote Control 27 Parental Rating 41 Partially sighted 81 Pause TV 59 Philips hue 76 Philips Logo, Brightness 24 Philips TV Remote App 67 Photo Camera, connect 19 Photo Frame 34 Photos, view 55 Picture Format 47 Picture Style 68 Picture, Backlight Contrast 74 Picture, Colour 70 Picture, problems 110 Picture, Sharpness 69 Picture, Shift 49 Picture, Stretch 51 Picture, Zoom 53 PIN Code 78 Playback formats 113 Playing games 54 Pointer 25 Pointer, about 25 Pointer, speed 25 P
Teletext 43 Terms of Use, Apps 35 Terms of Use, TV 115 Test Reception 83 Text 45 Treble 72 Troubleshooting 112 TV Guide 44 TV Guide, data/information 46 TV Guide, Reminder 44 TV Installation 81 TV language 47 TV network name 13 TV on Demand 41 TV Placement 73 TV Remote App 69 TV Speakers 75 U Unicable 84 USB Flash Drive, connect 19 USB Hard Drive, disk space 18 USB Hard Drive, Installation 18 USB Keyboard 20 USB Mouse 21 User manual 115 V Video on Demand 38 Video Selection 40 Video Stores 40 Videos, Photo
Powered by TCPDF (www.tcpdf.org) Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245 Sao Paulo 2938 0245 Бълария 02 4916 273 (Национален номер) Česká republika 228880895 (Místní tarif) Danmark 3525 8314 Deutchland 0180 501 04 69 (0,14€/Min.) Ελλάδα 2111983028 (Εθνική κλήση) España 902 88 10 83 (0,10€ + 0,08€/min.
