Register your product and get support at www.philips.
Contents 10.1 Sources list 33 10.2 From standby 33 10.3 EasyLink 33 1 My new TV 4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Smart TV 4 App gallery 4 Rental videos 4 Social networks 4 Skype 4 Smartphones and tablets 4 Pause TV and recordings 5 Gaming 5 EasyLink 5 11 Timers and clock 34 11.1 Sleeptimer 34 11.2 Clock 34 11.3 Switch off timer 34 12 Games 35 12.1 Play a game 35 2 Setting up 6 13 Your photos, videos and music 36 2.1 2.2 2.3 2.4 2.5 13.1 From a USB connection or network computer 36 13.
20.1 20.2 20.3 20.4 Software update 63 Software version 63 Open source software 63 Open source license 63 21 Troubleshooting and support 69 21.1 21.2 21.3 21.4 21.5 Troubleshooting 69 Register 70 Help 70 Online help 70 Consumer Care / Repair 71 22 Safety and care 72 22.1 Safety 72 22.2 Screen care 73 23 Terms of use, copyrights and licenses 74 23.1 Terms of use 74 23.
Start Smart TV and add the video store App to the Smart TV start page. 1 My new TV Open the video store App, create your personal account, select the movie and press play. No fuss with downloading, you can watch the movie immediately*. 1.1 Smart TV In Help, press Keywords and look up Rental videos for more information. Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.
1.6 1.8 Smartphones and tablets Gaming To use your smartphone or tablet as a TV remote control or as your media controller, download the Philips MyRemote app from your smartphone or tablet app store. If you select your game console in the Home menu, the TV switches to the settings ideal for gaming automatically. In Help, press Keywords and look up Game console or Two player games for more information. 1.
2 2.3 Setting up Tips on placement • Position the TV where light does not shine directly on the screen. • Dim lighting conditions in the room for best Ambilight effect.* • Position the TV up to 15 cm away from the wall. • The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen. 2.1 Read safety Read the safety instructions first before you use the TV. In Help, go to Safety and care > Safety. 2.
2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals.
• Scan Select Scan to scan for your wireless network (your wireless router). The TV might find several wireless networks in your proximity. • WPS If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press Connect to make the connection. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
Network problems Connect the router Wireless network not found or distorted To connect and setup the router follow steps 1 to 5. • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation.
For more information on Wi-Fi Miracast, press Keywords and look up Wi-Fi Miracast™. • Reset Wi-Fi direct group Clear the list of connected and blocked devices that are used with Miracast. • Wi-Fi smart screen For more information on Wi-Fi smart screen, press Keywords and look up Wi-Fi smart screen. • TV network name If you have more than one TV in your network, you can rename the TVs here. • Netflix Settings Adjust Netflix settings.
4 Connections If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. For more information on using EasyLink, press Keywords and look up EasyLink CEC. 4.1 Tips on connections Connectivity guide DVI to HDMI Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
the audio to video synchronisation. For more information, press Keywords and look up Audio to video sync. 4.2 EasyLink HDMI CEC EasyLink With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection. CVBS - Audio L R CVBS - Composite Video is a high quality connection.
screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu. 4.3 Note: Only devices that support EasyLink remote control function will respond to the TV remote control. Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV. Set-top box - STB EasyLink settings The TV comes with all EasyLink settings switched on. You can switch off any EasyLink setting independently.
All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you have connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection. the HTS, you need to switch off Audio out delay on the TV. To switch off the Audio Out delay . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Advanced > Audio out delay. 3 - Select Off and press OK. 4 - Press , repeatedly if necessary, to close the menu.
HDMI ARC sound signals. Problems with HTS sound Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing. You can fix this by setting the Audio out format of the TV to Stereo. Press and select Setup > TV settings > Sound > Advanced > Audio out format.
CVBS - Audio L R Installation Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV. Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. Formatting removes all files from the USB Hard Drive.
Install the keyboard You can use the scroll wheel to scroll pages up and down. To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. If you select a Cyrillic or Greek keyboard lay-out first, you can select a secondary Latin keyboard lay-out.
4.13 Computer Connect You can connect your computer to the TV and use the TV as a PC monitor. With HDMI If the contents list does not appear automatically, press SOURCES, select USB and press OK. Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. Use an HDMI cable to connect the computer to the TV. For more information on viewing photos, press Keywords and look up Your photos, videos and music. 4.
a movie) and press OK. 4 - Press , repeatedly if necessary, to close the menu. Remember to set the Game or computer setting back to Computer when you stop playing the game. 4.14 Headphones You can connect a set of headphones to the connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. To adjust the volume . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Headphones volume and press OK.
5 Switch on 5.1 On or Standby Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up. With the TV in standby, press on the remote control to switch the TV on. Switch to standby To switch the TV to standby, press on the remote control. Switch Off To switch the TV Off, press the Joystick at the bottom of the TV.
1 - HOME To open or close the home menu. 6 Remote control 2 - LIST To open or close the channel list. 6.1 Key overview 3 - EXIT To close a menu. Top 4 - SMART TV To open the Smart TV start page. 5 - INFO To open or close programme info. 6 - OK key To confirm a selection or setting. 7 - Arrow / navigation keys To navigate up, down, left or right. 8 - OPTIONS To open or close the Options menu. 1 - Standby / On To switch the TV On or back to Standby.
6.2 IR sensor The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. 6.3 Batteries 1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly.
7 Create your favourite channel list 1 - While watching a TV channel, press LIST to open the channel list. 2 - Select All to view all channels. 3 - Select the channel, and press to mark as favourite. 4 - The selected channel is marked with a . 5 - To finish, press . The channels are added to the Favourites list. TV channels 7.1 Watching TV channels Switch channels To remove a channel from the favourites list, select the channel with , then press again to unmark as favourite.
the on-screen keyboard. To switch off the parental age rating, select None as age setting. With the on-screen keyboard The TV will ask for the code to unlock the programme. For some broadcasters / operators, the TV only locks programmes with a higher rating. • To open the on-screen keyboard, place the cursor in the name text field and press OK. • To delete the character in front of the cursor, press Backspace. • To enter a character, select the character with the arrow keys and press OK.
- Zoom - Stretch - Native - Undo Subtitles Switch Subtitles on or Subtitles off with this options. Select Automatic to show subtitles only when the sound is muted with . Subtitle language Text / Teletext For digital broadcast, you can select an available subtitle language temporarily if none of your preferred languages are available. For more information, press Keywords and look up Subtitles. Text pages To open Text (Teletext) while you are watching TV channels, press TEXT.
Text setup Subtitles and languages Text language Subtitles Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language . . . Switch subtitles on To open the Subtitle menu, press SUBTITLE. You can set subtitles to On, Off or Automatic. To show subtitles when the broadcasted programme is not in your language — the language you set for the TV, select Automatic. Also, this setting will show subtitles when you mute the sound with .
the key to navigate the iTV pages. You can use the (Play), (Pause) and (Stop) keys to watch videos within iTV pages. To set the primary and secondary audio language . . . 1 - Press and select Setup and press OK. 2 - Select Channel settings and select Languages > Primary audio language or Secondary audio language and press OK. 3 - Select a language and press OK. 4 - Press , repeatedly if necessary, to close the menu. Close iTV pages Most iTV pages inform you which key to use to close.
Start an update Channel list copy To start an update yourself . . . Introduction 1 - Press and select Setup and press OK. 2 - Select Search for channels and press OK. 3 - Select Update channels and follow the instructions on screen. The update may take a few minutes. Channel list copy is intended for dealers and expert users. With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range.
successfully. Unplug the USB memory device. DVB-T + DVB-C To an already installed TV 1 - Verify the country setting of the TV. (To verify this setting, press and select Setup and press OK. Select Search for channels > Re-install channels and press OK. Press and later Cancel to leave the Search for channels.) If the country is correct continue with step 2. If the country is not correct, you need to start a reinstallation. To start the reinstallation, press and select Setup and press OK.
To check the reception quality of a digital channel . . . 1 - Tune to the channel. 2 - Press and select Setup and press OK. 3 - Select Channel settings > Channel installation > Digital : reception test and press OK. Network frequency mode If you intend to use the fast Quick scan method in Frequency scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable providers in your country.
8 Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. Open the Home menu 1 - To open the Home menu, press . 2 - Select an activity using the arrow keys and press OK to start the activity.
9 Change day TV guide The TV guide can show scheduled programmes for the upcoming days (maximum up to 8 days). 9.1 If the TV guide information comes from the broadcaster, you can press CH to view the schedule of one of the next days. Press CH to go back to the previous day. Alternatively, you can press OPTIONS and select Change day. Select Previous day, Today or Next day and press OK, to select the day of the schedule.
10 10.2 Sources From standby With the TV in standby, you can switch on a connected device with your TV remote control. 10.1 Sources list Play Sources menu To switch on both disc player and TV from standby and start playing the disc or programme immediately, press (play) on the TV remote control. The device should be connected with an HDMI cable and both TV and device must have HDMI CEC switched on. To open the Sources menu, press SOURCE.
11 To deactivate the Switch off timer . . . Timers and clock 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Switch off timer and set the slider bar to Off. 3 - Press , repeatedly if necessary, to close the menu. 11.1 Sleeptimer For more information on environmentally friendly TV settings, press Keywords and look up Eco settings. With the sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the sleep timer . . .
12 Games 12.1 Play a game With a game console connected to the TV, you can play games on TV. For more information on connecting a game console, press Keywords and look up Game console, connect. Start a game 1 - Switch on the game console. 2 - Press SOURCES, select the game console and press OK. 3 - Start the game. Ideal game setting For some games, where speed and precision is needed, set the TV to the ideal Game setting before you start playing.
13 The menu bar Your photos, videos and music Navigate to the menu bar and select the type of file you want to watch or play. Select Photos, Music or Videos. Alternatively, you can open the Folders view and browse your folders to look for a file. 13.1 Sorting From a USB connection or network computer To browse your photos by date, month, year or alphabetically by name, press Sort. To browse your music by album, artist, genre or alphabetically by name, press Sort.
• Shuffle Plays your videos in a random order. • Repeat Plays a video once or continuously. Play music To play music, select Music in the menu bar, select a song and press OK. If there are more songs in the same folder, press Play all to play all songs in this folder. To jump to the next or previous song, press CH or CH . To pause the music, press OK. Press OK again to continue. To make a 10-second jump in a song or 10-second jump back, press or . To rewind or fast forward, press or .
4 - Press , repeatedly if necessary, to close the menu. Share a screen on TV Blocking a previously connected device To share the screen of your smartphone, tablet or computer on the TV . . . If you want to block a device that you previously connected, you need to clear the Wi-Fi Miracast connections list first. If you clear this list, you will have to confirm or block the connection for every device again. 1 - Switch on the TV.
14 Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. For more information, press Keywords and look up USB Hard Drive. Pause or resume a broadcast To pause a broadcast, press (Pause). A progress bar appears briefly on screen. To call up the progress bar, press (Pause) again. To resume watching, press (Play).
at the top of the page and press OK. 2 - With the programme highlighted, press Record. The TV adds some time buffer at the end of the programme. You can add some extra buffer if needed. 3 - Select Schedule and press OK. The programme is scheduled for recording. A warning will appear / will be shown automatically when overlapping recordings are scheduled. If you plan to record a programme in your absence, remember to leave the TV switched to standby and the USB Hard Drive switched on. 15 Recording 15.
15.3 Watch a recording To watch a recording . . . 1 - Press , select Recordings and press OK. 2 - - In the list, select the recording and press (Play) to start the playback. You can use the (Forward), (Rewind), (Pause) or (Stop) keys on the remote control. Expired recording Broadcasters can limit the number of days a recording can be viewed. A recording in the list can show the number of days before it expires.
If the TV camera is not connected, Skype will not start. 16 Skype Sign in 16.1 Sign in to Skype with your Skype Name and password. If you don't have a Skype Name yet, you have to create a new Skype account. About Skype With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world. Talk to your friends while watching them on the big screen of your TV. To sign in to Skype… 1 - Press to open the Home menu.
password cannot contain a space. 16.4 If you don't have a Skype Name and Password yet, you can create a new account on the sign in page on TV. Skype menu 1 - On the sign-in page, select New account and press OK. 2 - Create your new account. • Full name Enter your full name. • Skype name Enter a name as your Skype name. Your Skype Name will be shown in the list of contacts of other Skype users. A Skype Name must begin with a letter, upper or lowercase.
View or change your email address, check the amount of credit you have or view the subscription information, or write a message that reflects your mood. Add a phone number In Contacts, the list of your contacts, you can add a phone number as a contact. You can call a phone with a Skype voice call. You need Skype Credits to make a phone call. • Profile picture If you did not upload a profile picture with your computer yet, you can select one of the available avatars as Profile picture here.
1 - On the Contacts page, select the contact you want to call. 2 - Select Call and press OK. If your contact is on Skype and answers the call, you can talk to your contact. 3 - To end the call, select End call and press OK. Remove or rename You can Remove or Rename contacts. To remove a contact… A contact can add you to a voice call with more than one participant. You cannot add an extra participant yourself. 1 - On the Contacts page, select the contact you want to remove.
Outgoing calls and press OK. 16.8 To view new contact requests, select Contact requests and press OK. Skype credit To view and listen to your voicemails, select Voicemails and press OK. On Skype, you can buy Skype Credit or take a Skype subscription. With Skype Credit or a Skype subscription available, you can call landline phones and mobile phones with your TV. For how long your Skype events are kept in this history list depends on the amount of contacts you have and how intensively you use Skype.
password for confirmation. If you allow a contact to send you a voicemail when you can't answer the call within 15 seconds and you are in another call, check the box of I am already in a call. If you allow a voicemail, when you declined a call, check the box of I decline an incoming call. Video To set your preferences for voicemail… You can set Skype to restrict the use of video in Skype calls. 1 - Sign in to Skype with your account. 2 - In the Skype menu, select Settings and press OK.
4 - Press Done to store the camera viewpoint and to go back to your Skype call. 16.10 Sign out When you sign out of Skype, you are signing out your Skype account. Your Online status will change to Offline. Your contacts will not be able to call you. To sign out… 1 - Press Back from anywhere within Skype to return to the Skype menu. 2 - Select Sign out in the Skype menu and press OK. The TV will ask you to quit Skype or to use Skype with another Skype account. 16.
1 - Switch on Smart TV parental control by selecting Enable and then press OK. 2 - Enter an unlock PIN code of your choice. 3 - Confirm your PIN code. Adult 18+ rated apps are now locked. To open a locked app, select the app and press OK. The TV will ask you to enter your 4-digit code. 17 Smart TV 17.1 About Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. 17.
On an App page, press OPTIONS and select Security info. If a lock is shown next to the loading animation on the bottom of the screen while loading a page, the transfer is secured. The Internet App opens the World Wide Web on your TV. On your TV, you can view any Internet website but most of them are not tailored for a TV screen. - Some plug-ins (e.g. to view pages or videos) are not available on your TV. - Internet pages are shown one page at a time and full screen.
1 - Press and select Setup and press OK. 2 - Select Network settings > Clear Internet memory and press OK. With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard Drive connected, you can also download rental movies from video stores that offer movie downloading only. You can pause or restart a downloaded rental movie.
18 Languages Settings Press Keywords and look up Audio language or Subtitles. Universal access 18.1 Press Keywords and look up Universal access for visually and hearing impaired users settings. Setup menu Channel installation Quick picture and sound settings Press Keywords and look up Automatic channel update or Channel update message. Also look up Manual installation for installing analogue channels or DVB to switch the antenna connection.
or (down). 4 - Press , repeatedly if necessary, to close the menu. Picture style For easy picture adjustment, you can select a preset setting with Picture style. Contrast 1 - Press and select Setup and press OK. 2 - Select TV settings > Picture. 3 - Select Picture style and press OK. With Contrast, you can adjust the contrast of the picture. To adjust the contrast . . . The available Picture styles are . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Picture > Contrast.
> Colour temperature. 3 - Press (right) and select Normal, Warm or Cool. Select Custom if you want to set a colour temperature yourself. 4 - Press , repeatedly if necessary, to close the menu. Video contrast With Video contrast, you can decrease the range of the video contrast. Video contrast is settings intended for expert users. To adjust the level . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Picture > Advanced > Contrast > Video contrast.
MPEG artefact reduction Sound style With MPEG artefact reduction, you can smoothen the digital transitions in the picture. MPEG artefacts are mostly visible as small blocks or jagged edges in images. For easy sound adjustment, you can select a preset setting with Sound style. 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound. 3 - Select Sound style and press OK. To reduce the MPEG artefacts . . . 1 - Press and select Setup and press OK.
sound menu. Surround mode To set the TV speakers . . . With Surround mode, you can set the sound effect of the TV speakers. 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Advanced > TV speakers. 3 - Press (right) and select Off, TV speakers, EasyLink or EasyLink autostart. 4 - Press , repeatedly if necessary, to close the menu. To set the surround mode . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Sound > Surround mode.
Audio out delay Ambilight settings If you set an Audio sync delay on your Home Theatre System, to synchronise the sound with the picture, you must switch off Audio out delay on the TV. Ambilight brightness With Ambilight Brightness, you can set the level of brightness of the Ambilight. For more information, press Keywords and look up Audio out delay. To adjust the level . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Ambilight > Brightness.
To switch on the commentary (if available) . . . Lounge light mood 1 - With Universal access switched on, press OPTIONS and select Universal access. 2 - Select Audio description and press OK. 3 - Select Off, Speakers, Headphones, or Speakers + headphones and press OK. When the TV is on standby, you can switch Ambilight on and create a Lounge light effect in your room. • To switch Ambilight on while the TV is on standby, press AMBILIGHT. • To change the Lounge light colour range, press AMBILIGHT again.
Speech The audio commentary can also hold subtitles for the words which are spoken. To switch on these subtitles (if available) . . . 1 - Press and select Setup and press OK. 2 - Select Channel settings > Languages > Audio description > Speech and press OK. 3 - Select Descriptive (audio) or Subtitles and press OK. 4 - Press , repeatedly if necessary, to close the menu. Key beep Key beep gives an audio feedback each time you press a key on the remote control. The volume of the beep is fixed.
19 End of use Specifications Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. 19.1 Environmental Saving energy When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Energy saving This Picture style sets the picture, together with Ambilight, in the most ideal energy conscious setting.
19.3 19.5 Display Dimensions and weights Type 55PFT6609 • without TV stand: Width 1243.2 mm - Height 720.6 mm - Depth 78 mm - Weight ±16.8 kg • Diagonal screen size : - 55PFT6609 : 140 cm / 55 inch • with TV stand: Width 1243.2 mm - Height 775.5 mm - Depth 280 mm Weight ±18.4 kg • Display native resolution : 1920x1080p Input resolution 19.
MPEG-1/2/2.5 Layer I/II/III (includes MP3), WMA (v2 to v9.2), WMA Pro (v9/v10) • Subtitles : – Formats : SAMI, SubRip (SRT), SubViewer (SUB), MicroDVD (TXT), mplayer2 (TXT), TMPlayer (TXT) – Character encodings : UTF-8, Central Europe and Eastern Europe (Windows-1250), Cyrillic (Windows-1251), Greek (Windows-1253), Turkish (Windows-1254), Western Europe (Windows-1252) • Image Codecs : JPEG • Limitations : – Maximum supported total bit rate for a media file is 30Mbps.
20 Update from Internet Software If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software. You need a high-speed (broadband) Internet connection. 20.1 Software update If you receive this message, we recommend you carry out the update. Select Update. Follow the instructions on screen. Update from USB You can also look for new updates yourself. To look for an update . . . It might be necessary to update the TV software.
This is a document describing the distribution of the source code used on the Philips TV, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain source code for this software can be found in the user manual. animation extension to the popular PNG image-format. This piece of software is made available under the terms and conditions of the libmng license, which can be found below.
windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications. This piece of software is made available under the terms and conditions of the DirectFB license, which can be found below. Source: http://sourceforge.net/projects/jointspace/files/remote_a pplications_SDK/remote_spplications_SDK_v1.3.1/DirectFB141_ source_1.3.1.7z/download routines for read, write and erase.
Source: http://sourceforge.net/projects/linux-ntfs A library provides an encrypted filesystem in user-space. Source: http://www.arg0.net/encfs fuse (2.8.4) Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel. This piece of software is made available under the terms and conditions of the fuse license, which can be found below. Source: http://fuse.sourceforge.net/ boost (1.15.
The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines. Source: http://www.gnu.org/software/grep/ text. sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file. Source: http://www.gnu.org/software/sed/ gzip (1.3.12) GNU Gzip is a popular data compression program originally written by Jean-loup Gailly for the GNU project.
ezxml (0.8.6) ezXML is a C library for parsing XML documents. Used inside Philips libraries. Source: http://sourceforge.net/projects/ezxml/ jquery (1.10.2) jQuery is a fast and concise JavaScript Library that simplifies HTML document traversing, event handling, animating, and Ajax interactions for rapid web development. Source: http://jquery.com/ SQLite (3.7.7.1) SQLite is a in-process library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine.
21 control or the TV. Troubleshooting and support The standby light keeps on blinking • Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care. 21.1 Change the language back to your language. Troubleshooting 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Menu language and press OK. 3 - Select the language you want and press OK.
21.2 Sound Register No sound or poor sound quality Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. • Make sure that the sound settings are correctly set.
question by email. You can download new TV software or the manual to read on your computer. 21.5 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support . TV model number and serial number You might be asked to provide the TV product model number and serial number.
22 Risk of injury or damage to the TV Safety and care • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects.
All Rights Reserved. countries. Microsoft PlayReady Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReadyprotected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content.
Index A Contrast, Video contrast 54 Active control 52 Activity style 55 Ambilight, Lounge light 58 Ambilight, mode 57 Ambilight, TV placement 6 Ambilight, TV switch off 57 Ambilight, wall colour 57 Amplifier, audio system 56 Antenna connection 7 Antenna connection, tips 11 App, gallery 50 App, rental videos 50 Apps, feedback 50 Apps, lock 52 Apps, open 54 Apps, recommended 56 Apps, search 58 Audio commentary 58 Audio description 60 Audio language 26 Audio Out - Optical 12 Audio to video sync 14 Auto subti
Red button 31 Rename channels 25 Rental videos 52 Repair 75 M Manual installation 30 Media servers, supported 63 Menu language 29 Miracast, block/unblock 38 Miracast, share a screen 38 Miracast, stop sharing 38 Miracast™ 37 Mouse, connect 17 MPEG artefact reduction 55 Music, playback 37 S Safety instructions 72 Screen care 73 Screen off 62 Sharpness 55 Sharpness, MPEG artefact reduction 57 Sharpness, Noise reduction 56 Sharpness, super resolution 54 Shop location 57 Skype, auto sign in 46 Skype, camera zo
Universal access 58 Universal access, audio effect 58 Universal access, hearing impaired 60 Universal access, mixed volume 58 Universal access, Speakers / Headphones 58 Universal access, speech 59 USB flash drive, connect 17 USB Hard Drive, disc space 18 USB Hard Drive, installation 16 USB keyboard 18 USB mouse 19 V Video selection 30 Videos, playback 37 Viewing distance 8 Visually impaired 62 W Watch TV 27 Wi-Fi 10 Wi-Fi Certified Miracast™ 39 Wired network 11 Wireless installation 16 World Wide Web 60 W
Powered by TCPDF (www.tcpdf.org) Non-contractual images / Images non contractuelles / Außervertragliche Bilder Specifications are subject to change without notice. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. All registered and unregistered trademarks are property of their respective owners. 2014 © TP Vision Europe B.V. All rights reserved. www.philips.
