Register your product and get support at www.philips.
Contents 7.2 Channel installation 31 1 My new TV 4 8 Satellite channels 35 1.1 Ultra HD TV 4 1.2 Smart TV 4 1.3 App gallery 4 1.4 Rental videos 4 1.5 Social networks 4 1.6 Ambilight+hue 4 1.7 Skype 5 1.8 Smartphones and tablets 5 1.9 Pause TV and recordings 5 1.10 Gaming 5 1.11 EasyLink 6 8.1 8.2 8.3 8.4 8.5 8.6 9 Home menu 42 10 TV guide 43 10.1 What you need 43 10.2 Using the TV guide 43 10.3 Recordings 43 2 Setting up 7 2.1 2.2 2.3 2.4 2.5 2.
18.12 Terms of use & Privacy Policy 61 19 Smart TV 62 19.1 19.2 19.3 19.4 19.5 19.6 About Smart TV 62 What you need 62 Setup Smart TV 62 Smart TV Apps 62 Multi view 64 Reset Smart TV 64 20 Multi room 65 20.1 About Multi room 65 20.2 What you need 65 20.3 Using Multi room 65 21 Share this… 66 22 MyRemote App 67 22.1 22.2 22.3 22.4 22.5 About MyRemote App 67 What you need 67 App download 68 App menu 68 App functions 68 23 Settings 71 23.1 23.2 23.3 23.4 23.
1 1.4 My new TV Rental videos To watch a rental video, you don't need to leave your home. Simply rent the latest movie from your regional online video store. 1.1 Ultra HD TV Start Smart TV and add the video store App to the Smart TV start page. This TV has an Ultra HD display. Its resolution is four times as much as normal HD displays. Ultra HD means 8 million pixels for the most refined and lifelike picture on TV.
can use your phone or tablet to send photos, music or videos from your computer to your TV. And with MyRemote app on a tablet, you can call up the TV guide, read about the programmes and switch the TV to a channel with a simple tap of your finger. The MyRemote app is available for iOS and Android. In Help, press Keywords and look up MyRemote app for more information. 1.9 Pause TV and recordings If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel. 1.
need a pair of 3D glasses for each player. In Help, press Keywords and look up Game console or Two player games for more information. 1.11 EasyLink With EasyLink you can operate a connected device, like a Bluray Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected devices. In Help, press Keywords and look up EasyLink for more information.
2 2.3 Setting up Tips on placement • Position the TV where light does not shine directly on the screen. • Dim lighting conditions in the room for best Ambilight effect.* • Position the TV up to 15 cm away from the wall. • The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen. 2.1 Read safety Read the safety instructions first before you use the TV. In Help, go to Safety and care > Safety. 2.
2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-C input signals. 2.6 Satellite dish Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
• Scan Select Scan to scan for your wireless network (your wireless router). The TV might find several wireless networks in your proximity. • WPS If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press Connect to make the connection. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
Network problems Connect the router Wireless network not found or distorted • Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. To connect and setup the router follow steps 1 to 5.
For more information on Wi-Fi Miracast, press Keywords and look up Wi-Fi Miracast™. • Reset Wi-Fi direct group Clear the list of connected and blocked devices that are used with Miracast. • Wi-Fi smart screen For more information on Wi-Fi smart screen, press Keywords and look up MyRemote App, Wi-Fi smart screen. • MyRemote recording Manage TV recordings remotely with a smartphone or tablet.. • TV network name If you have more than one TV in your network, you can rename the TVs here.
4 Connections If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. For more information on using EasyLink, press Keywords and look up EasyLink CEC. 4.1 Tips on connections Connectivity guide DVI to HDMI Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
Y Pb Pr - Audio L R Y Pb Pr - Component Video is a high quality connection. The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound. You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System. For more information, press Keywords and look up Audio Out settings. If the sound does not match the video on screen, you can adjust the audio to video synchronisation.
select Auto subtitle shift and select Off. Operate devices Auto switch off devices To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press SOURCES, select a device connected to an HDMI connection and press OK. You can set the TV to switch off the connecting HDMI-CEC compliant devices if they are not the active source. The TV switches the connected device to standby after 10 minutes of inactivity.
If a CAM is inserted and subscription fees are paid, (connection methods can differ), you can watch the TV broadcast. The inserted CAM is exclusively for your TV. 4.5 CAM settings Connect the dish antenna cable to the Satellite receiver. Satellite receiver To set passwords or PIN codes for the CAM TV broadcast, press and select Setup and press OK. Select Channel settings > Common Interface. Select the CAM TV broadcaster and press OK. 4.
you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you have connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection. HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required.
3 - If the volume difference is large, select More. If the volume difference is small, select Less. 4 - Press , repeatedly if necessary, to close the menu. 4.8 Audio Out levelling affects both the Audio Out - Optical and HDMI ARC sound signals. Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable, if the device has no HDMI connection.
Before you decide to buy a USB Hard Drive to record, you can check if it is possible to record digital TV channels in your country. Press TV GUIDE on the remote control. If there is a Record button on the TV guide page, you can record. For more information on how to install a USB Hard Drive, press Keywords and look up USB Hard Drive, installation. Installation Before you can pause or record a broadcast, you must connect and format a USB Hard Drive.
Connect the mouse Switch the TV on and connect the USB mouse to one of the USB connections on the TV. You can also connect the USB mouse to a connected USB keyboard. Mouse clicks • Left click = OK • Right click = Back You can use the scroll wheel to scroll pages up and down. Install the keyboard For more information on how to connect a keyboard, press Keywords and look up USB keyboard. To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV.
to Ultra HD if the resolution of the photo is higher. You cannot play a native Ultra HD video on any of the USB connections. For more information on watching or playing content from a USB flash drive, press Keywords and look up Your photos, videos and music. 4.13 Photo camera To view photos stored on your digital photo camera, you can connect the camera directly to the TV. SCART to Audio/Video Use one of the USB connections on the TV to connect. Switch on the camera after you made the connection.
Alternatively, you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV. Settings Ideal monitor setting If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically. If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.
5 5.3 Switch on Philips logo brightness You can switch off or adjust the Philips logo lighting. 5.1 To adjust or switch off… On or Standby 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Philips logo brightness and press OK. 3 - Select Maximum, Medium, Minimum or select Off to switch off the lighting of the logo. 4 - Press , repeatedly if necessary, to close the menu.
6 Remote control 6.1 Key overview Top 1 - SMART TV To open the Smart TV start page. 2 - Colour keys Follow on screen instructions. Blue key , opens Help. 3 - INFO To open or close programme info. 4 - BACK To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous Smart TV page. 1 - Standby / On To switch the TV On or back to Standby. 2 - Playback and record keys • Play , to playback.
To switch subtitles on, off or Automatically on. Qwerty and Cyrillic 4 - LIST To open or close the channel list. Overview of a Qwerty / Cyrillic keyboard.* 5 - Channel To switch to the next or previous channel in the channel list. To open the next or previous page in Text. To start the next or previous chapter on a disc. 1 - Cyrillic characters Characters available when the keyboard is switched to Cyrillic. 6 - Mute To mute the sound or to restore it.
switched to Cyrillic characters. The Cyrillic characters are shown at the top right of the keyboard keys. To write Cyrillic characters . . . 1 - Press on the remote control. 2 - Press again to switch back to Qwerty. Uppercase and lowercase • To type an uppercase character, press the (Shift) key just before you type the character. • To type several uppercase characters consecutively, press and hold the key while typing.
• The remote control is paired with another TV To pair, hold the remote control close to the Philips logo (about 10cm) and press the Red and Blue key at the same time. A message will appear if pairing is successful. • The remote control is not paired yet To pair, hold the remote control close to the Philips logo (about 10cm) and press OK. A message will appear if pairing is successful. 6.6 Cleaning Your remote control is treated with a scratch-resistant coating.
7 channel list. TV channels 1 - In the channel list Favourites, highlight the channel you want to reposition. 2 - Press . 3 - Select the channel to reorder and press OK. 4 - Press the Navigation buttons to move the highlighted channel to another location and press OK. 5 - Once complete, press EXIT to exit from the Favourite channel list. 7.1 Watching TV channels Switch channels You can highlight another channel and do the same. To watch TV channels, press .
• To delete a character, position the cursor behind the character and press . • To enter a character, press the character on the keyboard. • When you are ready, press OK to select Done. Press OK again to finish renaming. 1 - Press and select Setup and press OK. 2 - Select Channel settings > Child lock > Change code and press OK. 3 - If a code is set already, enter the current Child lock code and then enter the new code twice.
the provider settings with this option. 1 - Enter the page number with the number keys. 2 - Use the arrow keys to navigate. 3 - Press a colour key to select a colour-coded subject at the bottom of the screen. HbbTV on this channel You can block the HbbTV pages from a channel that offers HbbTV. For more information, press Keywords and look up HbbTV. Text sub-pages A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number.
3 - Select Text 2.5 > Off. 4 - Press , repeatedly if necessary, to close the menu. subtitles language or Secondary subtitles language and press OK. 3 - Select a language and press OK. 4 - Press , repeatedly if necessary, to close the menu. Menu language To select a subtitle language when none of your preferred languages are available . . . To change the language or the TV menus and messages . . . 1 - Press OPTIONS.
You can use the (Play), (Pause) and (Stop) keys to watch videos within iTV pages. press OK. 3 - Select the language you want and press OK. 4 - Press , repeatedly if necessary, to close the menu. Digital Text (UK only) To open Digital Text, press TEXT. To close, press . Interactive TV Close iTV pages Most iTV pages inform you which key to use to close. To force an iTV page to close, switch to the next TV channel and switch back.
by uploading a predefined channel list on a TV. Use a USB flash drive of minimum 1 GB. New channels New channels added with the automatic channel update are easy to find in the channel list New. The same new channels are also stored in the All or Radio channel list. Conditions • Both TVs are from the same year range. • Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA • Both TVs have compatible software versions.
start the reinstallation, press and select Setup and press OK. Select TV settings > General settings > Reinstall TV > OK. Select the correct country and skip the Search for channels. Finish the installation. When done, continue with step 2. 2 - Plug in the USB memory device that holds the channel list of the other TV. 3 - To start the channel list upload, press and select Setup and press OK. 4 - Select TV settings > General settings > Channel list copy > Copy to TV and press OK.
If you received a specific network frequency value to search for channels, select Manual. Reception quality If you receive digital channels, you can check the quality and signal strength of a channel. Network frequency If you have your own antenna, you can reposition the antenna to try and improve the reception. To check the reception quality of a digital channel . . . 1 - Tune to the channel. 2 - Press and select Setup and press OK.
8 Tune from the channel list Satellite channels To tune to a channel from the channel list . . . 1 - In the channel list, select or in the menu bar to select the TV or Satellite channel list. 2 - Select a list. 3 - Select a channel in any of the lists and press OK. The TV will tune to the selected channel. 8.1 Watching satellite channels To watch satellite channels . . . Press and select Satellite and press OK. The TV tunes to the satellite channel you last watched.
channel to another location and press OK. 5 - Once complete, press EXIT to exit from the Favourite channel list. Favourite channels You can mark channels as favourite channels. Your favourite satellite channels are collected in the Favourites list of the satellite channel list. 8.4 Lock satellite channels Watching favourite channels Set up a favourite channel list to easily switch between the channels you want to watch.
Child lock code Installing You can set or change the Child lock code. You can install your satellites during the initial TV setup. The satellite installation follows the TV channel installation. If you only watch satellite channels, you can skip the TV channel installation. You can always start a new satellite installation from the Setup menu. To set the lock code or to change the current code . . . 1 - Press and select Setup and press OK.
Update channel packages User band number With Update channel package, you can bring back satellite channels that were in the satellite channel list before but are now missing. The missing channels were repositioned on the transponder by the satellite operator. The TV must be updated with the latest version of the channel package. In a Unicable system, each connected satellite receiver must be numbered (e.g. 0, 1, 2 or 3 etc.).
Remove a satellite Update satellite channels You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. However, some satellite operators do not allow removing a satellite. Once a day, at 6 AM, the TV automatically updates the satellite channels. A channel update looks for new channels and adds them to the channel list.
1 - Press and select Setup and press OK. 2 - Select Satellite settings and press OK. 3 - Select Languages and press OK. Select the setting you want. 4 - Press , repeatedly if necessary, to close the menu. 1 - Press and select Setup and press OK. 2 - Select Satellite settings > Languages > Audio description > Speakers / Headphones and press OK. 3 - Select Speakers, Headphones or Speakers + headphones and press OK. 4 - Press , repeatedly if necessary, to close the menu.
1 - Press and select Setup and press OK. 2 - Select Satellite settings > Channel installation > Manual installation and press OK. 3 - If you have more than 1 satellite installed, select the satellite/LNB for which you want to add channels. 4 - Set the Polarization you need. If you set the Symbol rate mode to Manual, you can enter the symbol rate in Symbol rate manually. Enter the Frequency and start searching for the transponder.
9 Home menu From the Home menu, you can start any activity you can do with the TV. Open the Home menu to start watching TV or start watching a disc on your Home Theatre System. Also in the Home menu, you can open Smart TV to surf the Internet, start Skype or open Help if you need information on using the TV. Open the Home menu 1 - To open the Home menu, press . 2 - Select an activity using the arrow keys and press OK to start the activity.
Press to go back to the previous day. Alternatively, you can press OPTIONS and select Change day. Select Previous day, Today or Next day and press OK, to select the day of the schedule. 10 TV guide 10.1 What you need Set a reminder With the TV guide you can view a list of the current and scheduled TV programmes of your channels. Depending on where the TV guide information (data) is coming from, analogue and digital channels or only digital channels are shown.
11 11.2 Sources EasyLink With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection. 11.1 Sources list In the list of connections - the Source menu - you can find the devices connected to the TV. From this Source menu, you can switch to a device. For more information, press Keywords and look up EasyLink.
12 off. Timers and clock To deactivate the Switch off timer . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > General settings > Switch off timer and set the slider bar to Off. 3 - Press , repeatedly if necessary, to close the menu. 12.1 Sleep timer For more information on environmentally friendly TV settings, press Keywords and look up Eco settings. With the Sleep timer, you can set the TV to switch to standby automatically after a preset time. To set the Sleep timer . . .
13 13.4 3D Watch 3D To experience the best 3D effect while you watch 3D programmes: 13.1 What you need This is a Passive 3D TV. • Sit at a distance that is at least three times the width (w) of the TV screen. • Do not sit more than 6m away. To watch 3D you need to : 3D switching • Tune to a TV channel that broadcasts programmes in 3D. • Rent a movie in 3D from an online video store with Smart TV. • Watch a movie in 3D from a 3D Blu-ray Disc, a USB device or computer.
13.5 Optimal 3D viewing For an optimal 3D viewing experience, we recommend that you: • sit at least 3 times the height of the TV screen away from the TV, but no further than 6 meters away. • avoid fluorescent lighting (such as TL lighting or certain energy saving light bulbs which operate on a low frequency) and direct sunlight as they may interfere with the 3D experience. 13.6 Health warning • Watching 3D is not recommended for children under the age of six.
14 Play a two-player game Games To start a two-player game . . . 1 - Press SOURCES, select the game console and press OK. 2 - On the game console, start the game and select the multi or two-player mode. Select the mode for split screen viewing. 3 - On the TV, press OPTIONS, select Picture and sound, select Two-player gaming and press OK. 4 - Select the format in which the split screen game is shown on screen, Side by side or Top / bottom and press OK. The TV shows the 2 screens as full screens.
15 Sorting Your photos, videos and music To browse your photos by date, month, year or alphabetically by name, press Sort. To browse your music by album, artist, genre or alphabetically by name, press Sort. Videos are sorted alphabetically. 15.1 From a USB connection or network computer View photos To view photos, select Photos in the menu bar, select a photo thumbnail and press OK.
several times to speed up - 2x, 4x, 8x, 16x, 32x. To stop the music playback, press (Stop). another activity. If you press LIST or , the music keeps on playing. 15.2 Wi-Fi Miracast Info To view song info (title, artist, duration, etc.), select the song and press INFO. Press again to hide the info. About Wi-Fi Miracast Your TV is a Wi-Fi Certified Miracast™ device. With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly.
4 - On the TV, agree to the request to connect to the TV. You might be asked to enter a PIN code from the device on the TV enter the numbers with the digit keys on the remote control. Alternatively, you might be asked by the TV to enter a PIN code on the device. If you connect, the TV will show the screen of the device. 5 - On the device, select the videos, photos or files you want to watch on TV. Screen delay The normal delay when sharing a screen with Miracast is about 1 second.
16 Pause TV You can pause a TV broadcast and resume watching it later. Only digital TV channels can be paused. You must connect a USB Hard Drive to buffer the broadcast. You can pause a broadcast for a maximum time span of 90 minutes. For more information, press Keywords and look up USB Hard Drive. Pause or resume a broadcast To pause a broadcast, press (Pause). A progress bar appears briefly on screen. To call up the progress bar, press (Pause) again. To resume watching, press (Play).
3 - Select Schedule and press OK. The programme is scheduled for recording. A warning will appear automatically when overlapping recordings are scheduled. If you plan to record a programme in your absence, remember to leave the TV switched to standby and the USB Hard Drive switched on. 17 Recording 17.1 What you need To record a TV programme you need . . .
Expired recording Broadcasters can limit the number of days a recording can be viewed. A recording in the list can show the number of days before it expires. Failed recording When a scheduled recording was prevented by the broadcaster or when the broadcast was interrupted, a recording is marked as Failed. Delete a recording To delete a made recording, select the recording in the list, press OPTIONS and select Delete recording. For more information, press Keywords and look up Record a programme.
18 Install the camera Skype Connect the TV camera cable to one of the USB connections on the TV. Bend the small clamp as shown in the illustration below and position the camera on the top of the TV. 18.1 About Skype Point the camera to the position you usually sit at. When you are making a Skype call, you can pan, tilt or zoom in or out the camera image. With Skype™ you can make video calls on your TV for free. You can call and see your friends from anywhere in the world.
• People In People, you can start making a Skype call and manage your contacts. 4 - When Skype confirms that your new account is successfully created, leave the web browser and go back to the Sign in page of Skype on TV. 5 - Enter your Skype name and Password to sign in. Skype Name A Skype Name must begin with a letter, upper or lowercase. It must have 6 to 32 characters and can contain numbers. A Skype Name cannot contain a space.
You can change your online status. Select the status you want your contacts to see when you are online. double zero. When you're done , press OK. The name of your phone number contact will appear in your list. 18.6 Accept a contact request People When you receive a Contact request, a small icon will show next to History in the Skype menu. Your contacts To accept a contact request… In People, you can find the list of your Skype contacts. Your contacts are shown with their Skype Name.
available or have a Skype subscription to make a call with a phone number. If your contact answers the phone, you can talk to your contact. 3 - To end the call, select End call and press OK. 18.7 Calling on Skype With Skype, you can also call a phone number directly. You can enter the phone number with the dial pad. Video or voice call To open the dial pad… 1 - In the Skype menu, select Call phones and press OK. 2 - If the dial pad is not on screen, select Show Dial Pad and press OK.
you call a contact and they can't take the call, you can send a Skype voicemail to your contact. 18.9 Skype settings To send a voicemail or to receive a voicemail, you - or your contact - must set up Skype voicemail first. You can set up Voicemail on your computer. Go to www.skype.com Signing in When you made voicemail available for you on a computer, set your voicemail preferences in the Skype menu > Settings > Voicemails.
Privacy Call forwarding You can set Skype to restrict incoming Skype calls. Never miss a Skype call with Call Forwarding. You can allow calls from Anyone or from From people in my contact list only. If you are not online or can't take the call, you can forward a Skype call to any phone or mobile phone. You can also forward a Skype call to another Skype account. You can set up to three phone numbers or Skype Names in order of preference to forward calls to.
2 - Select Sign out in the Skype menu and press OK. The TV will ask you to quit Skype or to use Skype with another Skype account. 18.11 Quit Skype When you sign out of Skype, the Skype application on TV is still active. Another Skype account can sign in or you can create a new account. To stop the Skype application on TV, you must quit Skype. 18.12 Terms of use & Privacy Policy Read the Terms of Use of Skype at www.skype.com/go/tou Also read the Privacy Policy at www.skype.
1 - Switch on Smart TV parental control by selecting Enable and then press OK. 2 - Enter an unlock PIN code of your choice. 3 - Confirm your PIN code. Adult 18+ rated apps are now locked. To open a locked app, select the app and press OK. The TV will ask you to enter your 4-digit code. 19 Smart TV 19.1 About Smart TV Connect this Philips Smart LED TV to the Internet and discover a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi. 19.
On an App page, press OPTIONS and select Security info. If a lock is shown next to the loading animation at the bottom of the screen while loading a page, the transfer is secured. The Internet App opens the World Wide Web on your TV. On your TV, you can view any Internet website but most of them are not tailored for a TV screen. - Some plug-ins (e.g. to view pages or videos) are not available on your TV. - Internet pages are shown one page at a time and full screen.
With this TV, you can watch rental movies sent as a streaming video format. You can almost instantly watch the movie. You might need a USB Hard Drive to store some video buffer. If you have a USB Hard Drive connected, you can also download rental movies from video stores that offer movie downloading only. You can pause or restart a downloaded rental movie. Consult the video store regarding the rental duration of rental movies. 3 - Press + or – to change the TV channel in the small screen.
even when it's in standby. 20 Multi room Stream a TV channel 20.1 With Multi room, you can watch the current TV channel or open the channel list of the other TV. If you select a channel from the list, the other TV will also switch to the channel you selected. If the other TV has a build-in satellite tuner with installed channels or a connected Hard Disc Drive (HDD) with recordings*, you can also watch these on this TV.
21 Share this… With the Share this key on the back of the Remote Control, you can share the channel and programme name you’re watching or share the Internet address of the site you’re on. You can share the title and info of a programme selected in the TV Guide or share the App name and its icon from Smart TV. You can share all these things on Facebook or Twitter or any social network available on your Smart TV App pages. Your TV must be connected to the Internet.
To know in what year your TV was built, check the TV type number (E.g. xxPFLxxx4). If the last number is a '4' your TV is a 2009 model. If the last number is a '5' your TV is a 2010 model. A '6' for 2011, a '7' for 2012 and an '8' for 2013. 22 MyRemote App 22.1 About MyRemote App 22.2 What you need What this App can do Home network The MyRemote App and this TV, offer . . .
22.4 TV network name App menu TV network name From the MyRemote App menu, you can start the different MyRemote App functions. Simply tap a function to open it. To go back to the App menu, tap the App menu button at the top of the page. If you have more than one TV in your home network, you can rename the TV in Network settings. To rename your TV . . . 1 - Press and select Setup and press OK. 2 - Select Network settings and press OK. 3 - Select TV network name and press OK to show the current name.
* You can check the compatibility of MyRemote with your specific Philips product at the online support page of your product at www.philips.com/support. Also ensure your Philips product has been upgraded with the latest software. The first time you tap the TV guide button, you will be asked to link up the tablet and TV, if you did not link up yet. Control TV guide With the Control function on the MyRemote App menu, you turn your smartphone or tablet into a full remote control for your TV.
Scale Watch a TV channel To scale the picture to just fit or completely fill the screen, tap the Scale button to toggle between fill or fit. To watch a TV channel with the Wi-Fi smart screen function, tap Wi-Fi smart screen in the App menu. Wi-Fi smart screen will show the TV channel currently on TV. If the TV is switched to a connected device, you need to switch the TV back to Watch TV or to Watch Satellite (if a built-in satellite tuner is available).
23 Channel settings Settings In the Channel settings menu, you can set your language preferences or switch on the Universal access for people who are hearing and visually impaired. You can set an age rating to prevent children from watching a rated programme and set or change your Child lock code. You can switch on the Automatic channel update, do a digital reception test or install analogue channels manually. 23.
style you want to reset. 3 - Press Restore style. The style is reset. Network settings For more information on adjusting individual picture settings, press Keywords and look up Picture. Press Keywords and look up Network, settings. Vivid Update software If the Picture style is switched back to Vivid every time you switch on the TV, the TV location is set to Shop. A setting meant for in-store promotion. To set the TV for Home use . . .
Advanced picture settings ISF Colour control Colour settings With Colour control, an ISF expert can calibrate the colour reproduction of the TV. Colour control is an ISF expert setting. Colour enhancement Get the most out of your TV display with ISF® Calibration. You can ask an ISF calibration expert to come to your home and set the TV to the most optimal picture setting. Additionally the expert can set an ISF Calibration for Ambilight. Ask your dealer for an ISF Calibration of your TV.
2 - Select TV settings > Picture > Advanced > Contrast > Contrast modes. 3 - Press (right) and select Best picture, Best power, Standard or Off. 4 - Press , repeatedly if necessary, to close the menu. switch Light sensor on or off. To switch on or off . . . 1 - Press and select Setup and press OK. 2 - Select TV settings > Picture > Advanced > Contrast > Light sensor. 3 - Press (right) and select On or Off. 4 - Press , repeatedly if necessary, to close the menu.
off, when you return to watch TV. MPEG artefact reduction To switch the setting manually . . . With MPEG artefact reduction, you can smoothen the digital transitions in the picture. MPEG artefacts are mostly visible as small blocks or jagged edges in images. 1 - Press and select Setup and press OK. 2 - Select TV settings > Picture > Advanced > Activity style. 3 - Select Game, Computer or TV. The setting TV returns to the picture settings for watching TV.
Sound settings Headphones volume Bass With Headphones volume, you can set the volume of connected headphones separately. With Bass, you can adjust the level of low tones in the sound. To adjust the volume . . . To adjust the level . . . 1 - While watching a TV channel, press to open the menu. 2 - Select Headphone volume and press OK. 3 - Press (up) or (down) to adjust the volume. 4 - Press , repeatedly if necessary, to close the menu. 1 - Press and select Setup and press OK.
and sound. 2 - Select Speakers and select TV or Amplifier (audio device). 3 - Press , repeatedly if necessary, to close the menu. Audio Out offset If you cannot set a delay on the Home Theatre System, you can set a delay on the TV with Audio Out offset. Clear sound For more information, press Keywords and look up Audio Out offset. With Clear sound, you improve the sound for speech. Ideal for news programmes. You can switch the speech improvement on or off. TV placement To switch on or off . . .
2 - Press and select Setup and press OK. 3 - Select TV settings > Ambilight > Ambilight+hue and press OK. 4 - Select Ambilight+hue one step further, select On and press OK. 5 - Select Configure Ambilight+hue and press OK. If the TV is connected to your home network, it will start looking for the Philips hue Bridge immediately. If the TV is not yet connected to your network, the TV will start the network setup first. You must connect the TV to your home network.
Configure bulb Advanced Ambilight settings In the following step, you will configure each Philips hue bulb. Wall colour To configure each hue bulb… With Wall colour, you can neutralise the influence of a coloured wall on the Ambilight colours. Select the colour of the wall behind the TV and the TV will modify the Ambilight colours to appear as they are intended. 1 - Select the bulb name in the Configure Ambilight+hue menu and press OK. The bulb you selected is blinking.
switched on and automatically set to follow Lounge light when you configure Ambilight+hue. 3 - Select On and press OK. 4 - Press , repeatedly if necessary, to close the menu. To switch the hue bulbs on or off… With Universal access switched on in Setup, the Universal access option is added in the Options menu. 1 - Press and select Setup and press OK. 2 - Select TV settings > Ambilight > Advanced > Lounge light+hue. 3 - Select On or Off. 4 - Press , repeatedly if necessary, to close the menu.
For more information, press Keywords and look up Universal access. On the TV speakers only, on the headphones only or on both. To set Speakers / Headphones . . . 1 - While watching a TV channel, press OPTIONS, select Universal access and press OK. 2 - Select Audio description and press OK. 3 - Select Speakers, Headphones or Speakers + headphones and press OK. Mixed volume You can mix the volume of the normal audio with the audio commentary. To mix the volume . . .
power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TV 24 Specifications 24.1 Environmental Eco-label Saving energy Philips continuously focuses on lowering the environmental impact of its innovative consumer products.
Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health. • 576i - 50 Hz • 576p - 50 Hz • 720p - 50 Hz, 60 Hz • 1080i - 50 Hz, 60 Hz • 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz • 2160p - 24 Hz, 25 Hz, 30 Hz 24.
• with TV stand: Width 1092 mm - Height 706 mm - Depth 210 mm - Weight ±22 kg Part 10 AVC (H264), VC-1, WMV9 • Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB, Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital Out™, MPEG-1/2/2.5 Layer I/II/III (includes MP3), WMA (v2 to v9.
25 Update from Internet Software If the TV is connected to the Internet, you may receive a message from TP Vision to update the TV software. You need a high-speed (broadband) Internet connection. 25.1 Software update If you receive this message, we recommend you carry out the update. Select Update. Follow the instructions on screen. Update from USB You can also look for new updates yourself. To look for an update . . . It might be necessary to update the TV software.
This piece of software is made available under the terms and conditions of the libjpg license, which can be found below. Source: http://www.ijg.org/ 25.4 Open source license Acknowledgements and License Texts for any open source software used in this Philips TV. libmng (1.0.10) libmng -THE reference library for reading, displaying, writing and examining Multiple-Image Network Graphics.MNG is the animation extension to the popular PNG image-format.
Source: http://expat.sourceforge.net/ mtd-utils (1) The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc., but will only need to provide simple routines for read, write and erase.
Source: http://hostap.epitest.fi/wpa_supplicant/ DM_VERITY. This piece of software is made available under the terms and conditions of the lvm2 license, which can be found below. Source: ftp://sources.redhat.com/pub/lvm2/releases/ ntfsprogs (2.0.0) Some useful tool for ntfs file sytem. This piece of software is made available under the terms and conditions of the ntfsprogs license, which can be found below. Source: http://sourceforge.net/projects/linux-ntfs encfs (1.3.
code. The job is easy with awk, especially the GNU implementation: gawk. Source: http://www.gnu.org/software/gawk/ Source: http://psmisc.sourceforge.net/ sed (4.1.5) sed (stream editor) isn't an interactive text editor. Instead, it is used to filter text, i.e., it takes text input, performs some operation (or set of operations) on it, and outputs the modified text. sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file.
The Wireless Tools (WT)?is a set of tools allowing to manipulate the Wireless Extensions. They use a textual interface and are rather crude, but aim to support the full Wireless Extension. Source: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/T ools.html The gSOAP toolkit is an open source C and C++ software development toolkit for SOAP/XML Web services and generic (non-SOAP) C/C++ XML data bindings. Part of the software embedded in this product is gSOAP software.
When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press on the remote control or the TV. 26 Troubleshooting and support The standby light keeps on blinking Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care. 26.
Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. Choppy playback of USB files • The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback. Computer picture is not stable Make sure that your PC uses the supported resolution and refresh rate. 26.
Go to www.philips.com/support . On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our colaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. 26.5 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country.
27 Risk of injury or damage to the TV Safety and care • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set.
Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet.
consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field (EMF) standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects.
All Rights Reserved. countries. Microsoft PlayReady Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReadyprotected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content.
Index Clear LCD 75 Clear sound 77 Clock 45 Colour 72 Colour, Colour enhancement 73 Colour, Colour temperature 73 Common Interface slot 16 Connectivity guide 12 Consumer Care 93 Contact Philips 95 Contrast 76 Contrast, Brightness 76 Contrast, Contrast modes 73 Contrast, Gamma 74 Contrast, Light sensor 74 Contrast, Perfect contrast 74 Contrast, Video contrast 74 3 3D backlight contrast 72 3D, 2D to 3D conversion 46 3D, health warning 47 3D, optimal viewing 47 A Active control 72 Activity style 75 Ambilight
Home Theatre System, multichannel 16 Home Theatre System, problems 17 Home Theatre System, volume leveling 16 Network, problems 10 Network, settings 12 Network, Static IP 15 Network, wired 10 Network, wireless 9 New channels 34 Noise reduction 74 I Incredible surround 76 Infrared sensor 25 Interactive TV, about 31 Interactive TV, what you need 33 Internet memory, clear 10 ISF® Calibration 73 O On and Off 22 On screen Help 94 Online support 92 Online TV 64 Open source software 85 Options, on a channel 32
Safety instructions 94 Satellite, add 38 Satellite, age rating 36 Satellite, channel list 35 Satellite, channel update 39 Satellite, connection 8 Satellite, hearing impaired 40 Satellite, installation 37 Satellite, lock channels 36 Satellite, Multi-Dwelling-Unit 37 Satellite, packages 39 Satellite, remove 39 Satellite, rename channels 39 Satellite, Unicable 38 SCART connection, tips 13 Screen care 95 Screen off 51 Screen off 86 Sharpness 74 Sharpness, MPEG artefact reduction 77 Sharpness, Noise reduction 76
Powered by TCPDF (www.tcpdf.org) Contact information Argentina 0800 444 7749 Buenos Aires 0810 444 7782 België / Belgique 070 700 035 (0,15€/min.) Bosna i Hercegovina 033 941 251 (Lokalni poziv) Brazil 0800 701 0245 Sao Paulo 2938 0245 Бълария 02 4916 273 (Национален номер) Česká republika 228880895 (Místní tarif) Danmark 3525 8314 Deutchland 0180 501 04 69 (0,14€/Min.) Ελλάδα 2111983028 (Εθνική κλήση) España 902 88 10 83 (0,10€ + 0,08€/min.
